jbc CL2466 User manual

www.jbctools.com
English
Metal Brush for NAE
Ref. CL2466

Use the slots
to adjust
the brush
position
Cleaning system:
Brush or Wool
2 3
www.jbctools.com
Black tab
2. Separate both
parts of the
set to remove
the brush.
3. Place the new
brush into the
desired position.
E.g. Positioning
the brush further
back keeps the
solder waste
from splashing
outwards.
1. Push the black
tab to lift out the
cleaner-extractor
set.
Changing the brush
Compatible cleaning systems
Inox Wool
Ref. CL6205
Provides a superior cleaning
of the tip.
Brass Wool
Ref. CL6210
Leaves a small layer of solder
on the tip preventing oxidation
between cleaning and rewetting.
N.B. Cut the ball of wool in half to fit into the cleaner.

www.jbctools.com
Warranty
JBC’s 2 year warranty covers this device
against all manufacturing defects,
including the replacement of defective
parts and labour.
Warranty does not cover product wear
due to use or mis-use.
In order for the warranty to be valid,
equipment must be returned, postage
paid, to the dealer where it was
purchased.
0013587-0215
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC,
electronic equipment at the end of their life must be
collected and returned to an authorized recycling facility.