jbc FAE020 User manual

FAE020
Flexible Arm ø50 mm
INSTRUCTION MANUAL

Packing List
The following items are included:
Flexible Arm ø50 cm ............................. 1 unit
Ref. FAE020
Manual ........................................................... 1 unit
Ref. 0019181
Screws ......................................................... 3 units
DIN7982 - ø3.5x25 - black burnished
Ref. 0 019142
This manual corresponds to the following reference:
FAE020
2

40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
Assembly Example
Connect the flexible Hose
to the flexible Arm
FAE2
Fume Extractor
FAE010
Flexible Hose ø50 mm
Total length: ~1.6m / ~63in
Fix the flange on your
workbench with the supplied
screws (more information at
page 6)
FAE 020
Flexible Arm ø50mm
Take in mind the installation
dimensions (see page 5 below)
3

www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
- When the flexible arm loses
firmness, it must be
re-compressed.
- For a greater compression,
turn it slightly clockwise.
- Once the arm is compressed,
adapt its position again.
You can replace the supplied nozzle and choose the one that best suits your needs.
Arm assembly
Nozzles
FAE080
Rectangular Nozzle for FAE
aprox. 170 x 90mm /
6.69x3.54in
FAE081
Round Nozzle for FAE
aprox ø 120mm /
ø 4.72in
FAE082
Large Rectangular Nozzle for FAE
aprox. 227 x 107mm /
8.94x4.21in
4

40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUMEEXTRACTOR
PORT2
STATION3 STATION4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION1
Filter
STATION2
PORT1
PEDAL1 PEDAL2
FAE2
FUME EXTRACTOR
PORT2
STATION3 STATION 4
OK
70 cm / 27.6 in max.
Installation Guide Line
distance = 0
Do not install the flexible arm on shelves or
higher levels than the work bench. Forced
bending radii can cause the arm to break.
To avoid breaking the arm, do not extend the
arm more than 70 cm / 27.6 inches from the
center of its base and do not go below the
minimum bend radius of 20 cm / 7.87 inches.
min. bending
radius
20cm
7.87in
workbench
breakage
To install a new nozzle, turn the
nozzle bayonet clockwise to
lock it in place.
The nozzles are designed in
such a way that they can be
used with a hanging arm or be
lying on the workbench.
Nozzle Replacement
Nozzle in use
with hanging arm
Nozzle lying on
the workbench
To protect fexible arm tube from braking follows this installation guide line.
Note: In case of a breakage, the windings can be plugged back into each other. To do this, align the
windings with one another and push them back together with strength.
The bayonet system makes it
easy to change the nozzle. To do
this, hold the tube with one hand
and with the other turn the nozzle
counter-clockwise and pull it out
to remove the nozzle.
5

max. ø2mm
max. ø0.079in
~ ø58mm
~ ø2.283in
~ ø74mm
~ ø2.913in
Work bench
Drilled central
hole
Pilo hole
(3x)
Dimensions Scheme for FAE020 Fixing
To assemble the flexible arm FAE020 (Ø50) for the first time follow these instructions:
- First make the large central hole in your workbench as shown in the drawing below.
- Place the FAE020 flange in the opening and mark the points for the three pilot holes.
- Take out the flange and drill the three holes at the marked spots. The hole diameter can be found in
the dimension scheme:
6

40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Notes
7

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Specifications
0019181-300523
FAE020
Flexible Arm ø50 mm
Ref. FAE020
- Inner Tube Diameter: ø50 mm / ø1.97 in
- Total Net Weight: 1,76kg / 3.88lb
- Package Dimensions / Weight: 1050 x 170 x 120 mm / 2.5 kg
(L x W x H) 41.34 x 6.69 x 4.72in / 5.51 lb
Complies with CE standards.
ESD safe.