jbc HRL User manual

HRL
Articulated Left Hand Rest
INSTRUCTION MANUAL

Manual ............................ 1 unit
Ref. 0028802
Articulated Left
Hand Rest Arm ............ 1 unit
Packing List
The following items are included:
This manual corresponds to the following reference:
HRL-A
Height Adj. Flange ...... 1 unit
Ref. 0023991
Hand Rest Arm
Height Adjustment
Flange
Hand Rest
Features
2
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
Knob
Assembly
Setting up the Articulated Hand Rest
Fit the shaft into the flange bushing (1) and tighten the headless screw at the rear (2). Then assemble
first the height adjustment flange (3) and finally the hand rest arm (4) onto the shaft.
The hand rest arm position should be like shown in the image. The left hand rest is marked at its bottom
side with the letter “L”.
Headless Screw*
(at the back)
Shaft*
Flange
Bushing*
Height
Adjustment
Flange
Hand Rest
Arm
Bottom View
1
2
3
Left Hand
Rest
Height Adjustment
According to your work needs the articulated
hand rest allows adjustment for different heights
through the vertical axis.
Slide the arm to the appropriate height (1) and
secure it by tightening the knob (2) to guarantee
stability.
Arm
* Not included, sold separately.
4
1
2
3
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
Work Position Adjustment
The correct hand work positon ist shown in the following images:
HRL Articulated Left Hand Rest allows
adjustment for different positions according to
your work needs.
The articulated arm covers the entire working
area.
4
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
In the case of using both left and right arms, assemble both as shown in the illustration according to the
letters on the back of the hand rest, to keep the hand supports at the same level. The right hand rest
should be assembled below the left hand rest.
Accessories*
If a second hand rest ist needed, Articulated Left Hand Rest HRL is available. HRL also allows adjustment
for different positions.
HRL
Articulated Left Hand Rest
HRL
Articulated Left Hand Rest
HRR
Articulated Right Hand Rest
Bottom View
Mark for left hand
rest
Mark for right hand
rest
* Not included, sold separately.
Bottom View
Accessories*
If a second hand rest is needed, HRR Articulated Right Hand Rest is available. HRR also allows
adjustment for different positions.
HRR
Articulated Right Hand Rest
5
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
HRR and HRL can be combined with:
RWT Adjustable Rework Arm,
RWS Adjustable Rework Arm for PHSE and
RWB Adjustable Rework Arm for PHBE.
Assemble first the height adjustment flange (1), then the HRR (2) and afterward the HRL (3). Assemble
the second height adjustment flange (4) and finally the RWT (5).
Compatible JBC Articles*
* Not included, sold separately.
RWT
Ajustable Rework Arm
4 different sizes for PCB Supports are available:
- PHNS Support for PCBs up to 11x7 cm / 4x3”
- PHSS Support for PCBs up to 13x13 cm / 5x5”
- PHBS Support for PCBs up to 36x28 cm / 14x11”
- PHXLS Support for PCBs up to 51x61 cm / 20x24”
HRL
Articulated Left Hand Rest
HRR
Articulated Right Hand Rest
Place the preheater set
in the area below the
hot air tool
Heights Adjustmet
Flange (1st)
Heights Adjustmet
Flange (2nd)
6
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
HRR and HRL can be combined with:
RWT Adjustable Rework Arm,
RWS Adjustable Rework Arm for PHSE and
RWB Adjustable Rework Arm for PHBE.
Assemble first the height adjustment flange (1), then the HRR (2) and afterward the HRL (3). Assemble
the second height adjustment flange (4) and finally the RWT (5).
Compatible JBC Articles*
* Not included, sold separately.
RWT
Ajustable Rework Arm
4 different sizes for PCB Supports are available:
- PHNS Support for PCBs up to 11x7 cm / 4x3”
- PHSS Support for PCBs up to 13x13 cm / 5x5”
- PHBS Support for PCBs up to 36x28 cm / 14x11”
- PHXLS Support for PCBs up to 51x61 cm / 20x24”
HRL
Articulated Left Hand Rest
HRR
Articulated Right Hand Rest
Place the preheater set
in the area below the
hot air tool
Heights Adjustmet
Flange (1st)
Heights Adjustmet
Flange (2nd)
It is imperative to follow safety guidelines to prevent electric shock, injury,
fire or explosions.
Safety
- Do not use the equipment for any purpose other than PCB rework. Incorrect use may cause a fire.
- The temperature of accessible surfaces may remain high after the unit is turned off. Handle with care.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Do not leave up the arms directly above heat surfaces.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight as well as persons with reduced physical,
sensory or mental capabilities or lacking experience provided that they have been given adequate
supervision or instruction concerning the use of the appliance and understand the hazards involved.
Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
Maintenance
- Check periodically that the HRL is clean,
especially the sliding parts and the shaft.
- Use a damp cloth when cleaning. Alcohol
can only be used to clean the metal parts.
- Replace any defective damaged parts.
Use original JBC spare parts only.
- Repairs should only be performed by a JBC
authorized technical service.
Do not leave the HRL over the
preheater when it is in operation.
Sliding Parts
7
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0028802-111122
Specifications
HRL
Articulated Left Hand Rest
Ref. HRL-A
- Arm Lenght: 444,5 mm / 17.5 in
- Total Net Weight: 1.06 kg / 2.34 lb
- Package Dimension / Weight: 280 x 280 x 164 mm / 2.18 g
(L x W x H) 11.02 x 11.02 x 6.46 in / 4.80 lb
Complies with CE standards
ESD Safe