Toappreciate the full impact of today’smost popular digital media – to achieve the highest possible resolution and fidelity – takes versatility, connectivity and
more than a little raw power from your system’s electronics. The state-of-the-art electronic components of the Performance Series deliver brilliantly on all counts.
THE POWER TO PERFORM.
With 7X120 WATTS OF POWER, the AVA7 delivers
superb sonic performance, and INTERFACES DIRECTLY
WITH THE AV1, enabling superior remote control. It’s also vented
from the rear and the sides, rather than the top, for direct stacking above or
below the AV1.
THE INSIDE INFORMATION.
7
6
The SOFTWARE-UPGRADEABLE, HDTV-compatible AV1
speaks THX®and THX Ultra2™
, DTS-ES®and Neo:6®
, and Dolby®DPL, DPL II
and EX, not to mention JBL’S EXCLUSIVE LOGIC 7®
PROCESSING, which can create discrete multichannel sound from
two-channel sources. And with eight analog audio inputs, four coaxial and
four optical digital audio inputs, five S-video, five composite and three com-
ponent video inputs, it plays well with others.
AVA7 7-Channel Power Amplifier
AV1 7.1-Channel Surround Processor/System Controller
FORCED-AIR
COOLING
Two variable-velocity fans pull
cool air from the back of the
AVA7 chassis, over the unit’s
heatsinks and out the sides.
OPTIMAL
OPERATING
CONDITIONS
Continuous tracking of the
input signal strength and
the amplifier temperature
determines optimal airflow,
which increases durability
and longevity.
SIDE-VENTED
Because the AVA7 is vented
from the sides, it can be
stacked directly on or under
the AVA1.
The JBL PERFORMANCE AVA7 seven-channel power amplifier uses forced-air cooling to ensure the highest level of performance,
durability and longevity, even under extended high-power-output demands.
ELLIPTICAL OBLATE
SPHEROIDAL™(EOS)
WAVEGUIDES
First developed for JBL
Professional LSR studio monitors,
they evenly disperse high fre-
quencies over a wider area, for
better imaging anywhere in the
listening area.
TITANIUM
TWEETERS
Driven by powerful neodymium
magnets, these lightweight
domes are slavishly literal to
the highest frequency sounds,
and fast enough to reproduce
them effortlessly.
TITANIUM
INVERTED-DOME
MIDRANGE
DRIVERS
Precisely driven from their
centers, they deliver nearly
perfect pistonic motion for flat
frequency response well
beyond the crossover point.
STRAIGHT-LINE
SIGNAL PATH™
(SSP) NETWORKS
This crossover design provides
the shortest route from the input
terminals to the transducers.
Minimizes signal loss and noise.
BENEFIT: Ensures that a
strong, precise signal arrives at
each driver.
INVERTED-DOME
WOOFERS
Pure, undistorted bass even
at the highest listening
levels, enabled by rigid cast-
aluminum frames that are
sonically neutral.
FREEFLOW™-PORT
ARCHITECTURE
Couples internal air motion to
acomputer-designed aperture
that allows for maximum air flow
without audible “port noise,”
extending bass response.
BETTER IN-WALL
PERFORMANCE
These scanning laser
vibrometer images compare
wall-panel resonances with
and without JBL’s Baffle
Isolation System™
.
Note: More extreme colors
indicate increased vibration.
EASY
INTEGRATION
Front-panel controls provide con-
venient access to speaker fine-
tuning for personal preferences,
integration with other speakers,
and placement considerations.
ADJUST,
COMPENSATE,
CONTROL Precisely tailor
bass compensation, high-end level
and output, and off-axis frequency
response to the acoustic charac-
teristics of your listening area.
With the Baffle
Isolation System™
Without baffle
isolation
