JDS Uniphase OTU-8000 (EOTU8000E) User manual

JDSU OTU-8000 (EOTU8000E)
Optical Test Unit for ONMSi
Rack-based optical test unit for RFTS (Remote Fiber Test System)
User Manual

JDSU OTU-8000 (EOTU8000E)
Optical Test Unit for ONMSi
Rack-based optical test unit for RFTS (Remote Fiber Test System)
User Manual

User Manual 7OTU80050/01 v
Notice Every effort was made to ensure that the information in this document
was accurate at the time of printing. However, information is subject to
change without notice, and JDSU reserves the right to provide an
addendum to this document with information not available at the time
that this document was created.
Copyright © Copyright 2013 JDSU, LLC. All rights reserved. JDSU, Enabling
Broadband and Optical Innovation, and its logo are trademarks of
JDSU, LLC. All other trademarks and registered trademarks are the
property of their respective owners. No part of this guide may be repro-
duced or transmitted electronically or otherwise without written permis-
sion of the publisher.
Trademarks JDSU and OTU-8000 V2 are trademarks or registered trademarks of
JDSU in the United States and/or other countries.
HP is a trademark or registered trademark of the Hewlett Packard
Company in the United States and/or other countries.
Microsoft, Windows, Windows CE, Windows NT, and Microsoft Internet
Explorer are either trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Netscape Navigator is a trademark or registered trademark of
Netscape Communications Corporation in the United States and other
countries.
Pentium is a trademark or registered trademark of the Intel Corporation
in the United States and/or other countries.
Solaris, Sun, Sun Microsystems, and Java are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and/or other
countries.
Specifications, terms, and conditions are subject to change without
notice. All trademarks and registered trademarks are the property of
their respective companies.
Manual This guide is a product of JDSU's Technical Information Development
Department. This manual gives you the main information to install,start
and use the OTU-8000.
WEEE Directive Compliance JDSU has established processes in compliance with the Waste Elec-
trical and Electronic Equipment (WEEE) Directive, 2002/96/EC.

vi User Manual 7OTU80050/01
This product should not be disposed of as unsorted municipal waste
and should be collected separately and disposed of according to your
national regulations. In the European Union, all equipment purchased
from JDSU after 2005-08-13 can be returned for disposal at the end of
its useful life. JDSU will ensure that all waste equipment returned is
reused, recycled, or disposed of in an environmentally friendly manner,
and in compliance with all applicable national and international waste
legislation.
It is the responsibility of the equipment owner to return the equipment
to JDSU for appropriate disposal. If the equipment was imported by a
reseller whose name or logo is marked on the equipment, then the
owner should return the equipment directly to the reseller.
Instructions for returning waste equipment to JDSU can be found in the
Environmental section of JDSU’s web site at www.jdsu.com. If you have
questions concerning disposal of your equipment, contact JDSU’s
WEEE Program Management team at [email protected].

User Manual 7OTU80050/01 vii
Table of Contents
About This Guide xi
Purpose and scope xii
Assumptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Technical assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Recycling Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Chapter 1 Prerequisites and delivery of the OTU-8000 1
Prerequisites of the OTU-8000 2
General view of the prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
OTU-8000 and rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Overall dimensions of the OTU-8000 in the racks . . . . . . . . . . . . . . 3
OTU-8000 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
OTU-8000 Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Section of electric wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
AC Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Patchcords & jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Network Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Network access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
GSM option and SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Delivery of the OTU-8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Delivery of the basic elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Elements delivered on option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Rack option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
GSM Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
AC/DC Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Optical Switch module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
OSX8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Overall dimensions of the OSX8000 in the racks . . . . . . . . . . . . . . 9
Launch Fiber Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
OTDR Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Summary of the delivery and the prerequisites for an OTU-8000 . . . . .11
General information on warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Hardware Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Table of Contents
User Manual 7OTU80050/01 viii
Chapter 2 OTU-8000 General Description 15
Front Panel description 16
LEDs description 18
Chapter 3 Installation of the OTU-8000 21
Installation of the OTU-8000 into the rack 22
Fixing the OTU into the rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Setting the plexi protector onto the OTU-8000 . . . . . . . . . . . . . . . . . . . 23
Supply installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
-48 V DC or AC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Dual power feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Connector pin-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Installation of the Female Ground Connector . . . . . . . . . . . . . . . . . . . . 25
Installation of Ferrites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Procedure for switching on and off the OTU-8000 . . . . . . . . . . . . . . . . 25
Installation for the GSM Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
OSX8000 additional optical switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Installation of the OSX8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Mounting the brackets for a 21’’ or 23’’ rack . . . . . . . . . . . . . . . . . 27
Fixing the OSX8000 into the rack . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connecting the OSX8000 to the OTU-8000 . . . . . . . . . . . . . . . . . . . . . 28
Configurations of 1 OTDR and 36 ports . . . . . . . . . . . . . . . . . . . . . . . . 29
Configuration with one internal optical switch and one OSX8000 . . . . 29
Configuration with one internal optical switch and more than one OSX8000
29
Configuration with more than one OSX8000 . . . . . . . . . . . . . . . . . . . . 30
Installation of the Launch Fiber Module . . . . . . . . . . . . . . . . . . . . . . . . . 31
Installation of the Launch Fiber into the module . . . . . . . . . . . . . . . . . . 31
Installation of the module into the rack . . . . . . . . . . . . . . . . . . . . . . . . . 32
Changing the brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Fixing the Launch Fiber module into the rack . . . . . . . . . . . . . . . . 32
Connecting the Launch Fiber Module . . . . . . . . . . . . . . . . . . . . . . . . . 33
Description and use of the Relay option . . . . . . . . . . . . . . . . . . . . . . . . 34
Configuring the OTU-8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
OTU-8000 login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
OTU-8000 IP configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
OTU-8000 Configuration via the Web Interface . . . . . . . . . . . . . . . . . . 35
Configuring the TCP/IP Network . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Backup route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Tab «ONMSi Server» . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Tab «SMS» . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Tab «Alert test» . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Changing OTDR plug-in(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Configuring the OSX8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Advanced mode for a single External Switch . . . . . . . . . . . . . . . . 41
Adding Remote Optical Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Configuring the optical switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Chapter 4 Operating the OTU-8000 45
Introduction 46
User Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Default login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Login on welcome page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Table of Contents
User Manual 7OTU80050/01 ix
General display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Menu frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Main frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Exploitation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Alarm Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Alarm monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Alarm types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Alarm severity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Testing and measuring a fiber under alarm . . . . . . . . . . . . . . . . . . . . . 51
Testing a fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Measuring a fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Displaying alarm details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
OTDR links status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Testing an OTDR link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Measuring an OTDR link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Performing a measurement on a fiber . . . . . . . . . . . . . . . . . . . . . . . . . 55
Performing a measurement with an OTU-8000 and Optical Remote
Switch(es) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Functions available with an OTDR trace . . . . . . . . . . . . . . . . . . . . . . . 56
Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Supervision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Testing IP with default values . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Testing IP with specific values . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Log files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Degraded mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Login change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Changing settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Connected users - User disconnection . . . . . . . . . . . . . . . . . . . . . 60
Chapter 5 Technical Specifications 63
Base Unit Technical specifications 64
Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
I/O Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Power supply AC/DC Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Relay contacts (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
OTDR Modules technical specifications . . . . . . . . . . . . . . . . . . . . . . . . 65
UHR OTDR Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
B, C & D OTDR Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
OTDR size and weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Distance Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Optical switch technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . 68
Chapter 6 Options and accessories 69
OTU-8000 references 70
Main frame / System Component / Test Set . . . . . . . . . . . . . . . . . . . . . 70
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Optical Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Optical swtich (External unit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
OTDR Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Table of Contents
x User Manual 7OTU80050/01
Index 73

User Manual 7OTU80050/01 xi
About This Guide
Topics discussed in this chapter are as follows:
–“Purpose and scope” page xii
–“Assumptions” page xii
–“Technical assistance” page xii
–“Recycling Information” page xiii
–“Conventions” page xiii

About This Guide
Purpose and scope
xii User Manual 7OTU80050/01
Purpose and scope
The purpose of this guide is to help you successfully use the OTU-8000
features and capabilities. This guide includes task-based instructions
that describe how to install, configure, use, and troubleshoot the OTU-
8000. Additionally, this guide provides a complete description of JDSU’s
warranty, services, and repair information, including terms and condi-
tions of the licensing agreement.
Assumptions
This guide is intended for novice, intermediate, and experienced users
who want to use the OTU-8000 effectively and efficiently. We are
assuming that you have basic computer and mouse/track ball experi-
ence and are familiar with basic telecommunication concepts and termi-
nology.
Technical assistance
If you need assistance or have questions related to the use of this
product, call or e-mail JDSU’s Technical Assistance Center for
customer support.
During off-hours, you can request assistance by doing one of the
following:
– leave a voice mail message at the Technical Assistance number in
your region
– e-mail North American Technical Assistance Center, [email protected],
or European Technical Assistance Center,
[email protected]
– submit your question using our online Technical Assistance
Request form at www.jdsu.com.
Table 1Technical assistance centers
Region Phone Number
Americas
Telecom Products
866 228 3762
World Wide: 301 353 1550 [e-mail]
Europe, Africa, and Mid-East [phone]
(Europe) [email protected]
Asia and the Pacific
Southeast Asia, Australia, and
New Zealand
[phone] [email protected]
All others 866 228 3762 [e-mail]

About This Guide
Recycling Information
User Manual 7OTU80050/01 xiii
Recycling Information
JDSU recommends that customers dispose of their instruments and
peripherals in an environnmentally sound manner. Potential methods
include reuse of parts or whole products and recycling of products
components, and/or materials.
Waste Electrical and electronic Equipment (WEEE) Directive
In the European Union, this label indicates that this product should not
be disposed of with household waste. Il should be deposited at an
appropriate facility to enable recovery and recycling.
Conventions
This guide uses naming conventions and symbols, as described in the
following tables.
Table 2 Typographical conventions
Description Example
User interface actions appear in this
typeface.
On the Status bar, click Start
Buttons or switches that you press on a
unit appear in this TYPEFACE.
Press the ONswitch.
Code and output messages appear in
this typeface.
All results okay
Text you must type exactly as shown
appears in this typeface.
Type: a:\set.exe in the dialog box.
Variables appear in this typeface. Type the new hostname.
Book references appear in this type-
face.
Refer to Newton’s Telecom Diction-
ary
A vertical bar | means “or”: only one
option can appear in a single command.
platform [a|b|e]
Square brackets [ ] indicate an optional
argument.
login [platform name]
Slanted brackets < > group required
arguments.
<password>
Table 3 Keyboard and menu conventions
Description Example
A plus sign + indicates simultaneous
keystrokes.
Press Ctrl+s
A comma indicates consecutive key
strokes.
Press Alt+f,s
A slanted bracket indicates choosing a
submenu from menu.
On the menu bar, click
Start > Program Files.

About This Guide
Conventions
xiv User Manual 7OTU80050/01
Table 4 Symbol conventions
Table 5 Safety definitions
This symbol represents a general hazard.
This symbol represents a risk of electrical shock.
NOTE
This symbol represents a Note indicating related information or tip.
This symbol, located on the equipment or its packaging, indicates that the equip-
ment must not be disposed of in a land-fill site or as municipal waste, and should be
disposed of according to your national regulations.
WARNING
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.

1
User Manual 7OTU80050/01 1
Chapter 1 Prerequisites and delivery of
the OTU-8000
This chapter describes the prerequisites useful before installing/config-
uring the OTU-8000. It also gives a detailed description of all the
elements you will receive according to the configuration asked during
the order.
Topics discussed in this chapter are as follows:
–“Prerequisites of the OTU-8000” on page 2
–“Delivery of the OTU-8000” page 5
–“Summary of the delivery and the prerequisites for an OTU-8000”
page 11
–“General information on warranty” on page 12

Chapter 1 Prerequisites and delivery of the OTU-8000
Prerequisites of the OTU-8000
2 User Manual 7OTU80050/01
Prerequisites of the OTU-8000
General view of the
prerequisites
OTU-8000 and rack
Specific conditions are required to install the OTU-8000 in a rack. There
are different conditions according to the type of rack used and whether
the OTU-8000 is delivered with a plexi protection cover or not.
Fig. 1 View of the prerequisites

Chapter 1 Prerequisites and delivery of the OTU-8000
Prerequisites of the OTU-8000
User Manual 7OTU80050/01 3
Overall dimensions of the OTU-
8000 in the racks
Floor-space
Fig. 2 Rack 21’’ (ETSI)
Fig. 3 Rack 19’’ and 23’’
240
72.2
Milled screws are used
2U
446
280
32.2
2U
Countersunk
screws are used
21.2
Milled screws
are used

Chapter 1 Prerequisites and delivery of the OTU-8000
Prerequisites of the OTU-8000
4 User Manual 7OTU80050/01
OTU-8000 Power Supply
OTU-8000 Consumption Your local electrical installation must comply with the OTU-8000 power
consumption:
– DC Input: -36 to -60V
– Power consumption: 35W
Section of electric wires Electric wires plugging into the OTU-8000 must have a section inferior
or equal to 1,5mm².
AC Power supply The OTU-8000 works on -48V DC power. The OTU-8000 can be deliv-
ered with the specific AC to DC converter, if ordered as an option (Ref:
E98ACDC).
In this case, the converter is already wired to a female 5-point
connector.
Converter specifications
AC Input: 100-250 V, 2A, 50-60 Hz
DC Output: -48V, 2.5 A
Patchcords & jumpers The jumpers used to connect the OTDR to the optical switch are
provided. Patchcords to the ODF are not supplied.
Network Communication Make sure you have the correct cables, connectors and required infor-
mation to setup and configure the network access.
Network access The cable used to connect the OTU-8000 to Ethernet1is a regular
ethernet cable with a RJ45 connector. This cable is not delivered with
the OTU-80002.
Fig. 4 Converter with female connector delivered
Do not use any converter or power cord other than those
supplied by JDSU as an option for the instrument.
1. This connection is necessary unless you ordered the PSTN option
2. Unless you specifically order it to JDSU

Chapter 1 Prerequisites and delivery of the OTU-8000
Delivery of the OTU-8000
User Manual 7OTU80050/01 5
GSM option and SIM card As an option, the OTU-8000 can be equipped with a GSM modem and
send SMS notifications to a portable phone in case of alarms.
The SIM card must have the data or data + voice subscription option
(according to the tests results) and must not have PIN code.
Delivery of the OTU-8000
Delivery of the basic
elements
According to the options asked during order, the delivery of the OTU-
8000 is different for each client.
Before installing the OTU-8000, make sure you have all the necessary
elements according to the configuration ordered.
The OTU-8000 is ALWAYS delivered with the minimum following
elements:
– 19’’ brackets
– One Getting Started Manual, in English
– Plexi protector
– Screws and bolts sachet for cover and rack mounting
– Supply connector
– Relay connector
– 2 ferrites
– The male ground connector (set onto the OTU-8000)
The SMS notification in case of alarm is only used when the
server is not reachable.

Chapter 1 Prerequisites and delivery of the OTU-8000
Delivery of the OTU-8000
6 User Manual 7OTU80050/01
Elements delivered on option Once you received the OTU-8000, make sure that you have all the
elements ordered, according to the configuration you ordered.
Rack option According to the rack in which the OTU-8000 will be installed, you will
need to set the corresponding brackets onto the OTU-8000.
The package is delivered with:
– The 19’’ brackets mounted on slides.
– The 21’’ or 23’’ brackets mounted on slides if a rack 21’’ or 23’’ is
used
– The screws and bolts sachets to fix the brackets.
Fig. 5 Delivery of the basic elements for OTU-8000
Supply connector
and ferrite
Relay connector
Plexi
protector
Kit for cover, supply
cord and rack fixation
Brackets
Ferrite
Male
ground
connector
Getting Started Manual
NOTE
You must have a POZI screwdriver N°2 and thread lock.