Jensen FOX1000i User manual

Internet Radio
with DAB+, FM and Bluetooth
MODEL NO.: FOX1000i
M

1
Page index
1. Getting started
1.1 Appearance and key descriptions
1.2 Remote control
1.3 Display symbols
1.4 Connect to the wireless network
1.5 AirMusic Control app
2. Internet radio
2.1 Listen to radio station
2.2 My favorite
2.3 History
2.4 MyMediaU
3. DAB
4. FM
5. Bluetooth
6. Media Center
7. Music Streaming
8. Alarm and timer
9. Configuration
10. Troubleshooting
11. Specifications
1. Getting started
The packaging box contains the following items:
FOX1000i DAB+/FM/Internet Radio
Remote Control
AC Power Cord
User Manual (English, Norsk)

2
Thank you
for choosing Jensen of Scandinavia
At Jensen of Scandinavia satisfied customers mean everything
to us. We are therefore constantly seeking knowledge in order to
meet the requirements and expectations of our customers.
Our goal is to be the obvious first choice, the best provider of
customer service and offer products that are easy to use.
We would like to take this opportunity to once again thank you
for choosing our product!
Best Regards
Jensen of Scandinavia
Network Requirement
The FOX1000i is an internet radio and will require the following:
A wireless internet connection (Wi-Fi)
Smartphone or Tablet that runs iOS or Android system.
Please make sure that both FOX1000i and your
smartphone/tablet is connected to the same wireless network

3
1.1 Appearance and Key Description
FRONT VIEW
1. Home button
Press to return to the main menu
2. M - Mode button
Switch between audio sources like Bluetooth, FM, DAB etc.
3. 2.4”TFT full color display
4. Power on/Standby button
5. IR Remote Sensor

4
TOP VIEW
6. < Left cursor / Previous button
7. Play/Pause button
8. > Right cursor / Next button
9. Preset 1, 2, 3, 4
10. Preset button
Press and hold to save the stations.
11. Volume/Navigate + OK dial
Adjust volume;
Cursor up/down;
Confirm selection

5
BACK VIEW
12. USB port for charging (5V,1A)
13. 3.5mm head phone jack (Music out)
14. AC Socket
15. Telescopic Antenna
12 13 14
15
USB

6
1.2 Remote Control
1. Mute button
2. Power On/Standby
3. Button. Press to return to
the main menu.
4. Increase volume button
5. Decrease volume button
6. Button. Press to go back
to previous track
7. Button. Press to change
to next track
8. Play/Pause button
9. Mode button. Press to go to
main menu.
10. Up cursor button
11. Left cursor button
12. Right cursor button
13. Down cursor button
14. OK button
15. 0~9 call up favorites/memory; Input letters and numbers
16. EQ button
17. INFO button
18. PRESET button
19. Sleep button
20. ALARM button
21. TIMER button
Remember to pull out the clear plastic tab from the battery
compartment before using the remote.
To remove the battery from the remote, use your thumb to pull out the
battery tray. Replace it with 2 x AAA type battery.
Caution: Risk of explosion of battery is replaced by an incorrect type.
Please dispose used batteries to an environment station or to the local
consumer store.
1 2
3 4
6 9
810
7
5
1211
14
13
17
16
21
18
19
20
15

7
1.3 Display symbols
Connection is being established, device functioning
No wireless connection
Wireless connection established
Search
DAB/FM radio function selected
DAB/FM radio reception: Mono
DAB/FM radio reception: Stereo
Speaker off
Alarm on
Internet radio station saved as favorite
FM radio station saved
1.4 Connect to the wireless network
Note: Any walls or ceilings may reduce the strength of
the WiFi connectivity.
Therefore, try to locate the FOX1000i in a place it can
receive good Wi-Fi signals.
Plug the power cord into the AC socket on the FOX1000i
The first time you start the FOX1000i, the system will ask you
to set Language and Network Configurations.

8
Select language using remote
Control or the volume knob.
Select YES for the FOX1000i to
automatically connect to the
wireless network each time it is
powered on.
Select if you want to setup the
wireless connection now.
See next page for more
information.

9
There are two ways to connect FOX1000i to the wireless network:
Option 1 - Connect entering the wireless password:
Select Yes to connect the FOX1000i to the wireless network using the
normal wireless password.
Select No if you would prefer to listen to a terrestrial station (DAB/FM)
or to use the speaker with an external playback device.
If you answer Yes, the FOX1000i will scan for Wireless Network and
shortly afterwards a list of available wireless networks will appear.
Select wireless network and enter
password:
A. Select your network from the list
and confirm with OK
(use the remote control or the
volume knop).
B. If your WLAN is
password-protected, you will be
prompted to enter your password.
Entering password using volume
knob:
C. Rotate the volume knob to
choose the code.
D. Click the > on the FOX1000i to
enter next letter.
E. Press down the volume knob
when you are finished entering the
whole password.
F. It may take a few seconds to
establish the connection to the
network.