Jensen JCR-229 User manual

FM Digital Dual Alarm Clock Radio
MODEL: JCR-229
USER MANUAL
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING
THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE

E
-
1
WARN NG
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT
FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
The R ting pl te is loc ted t the bottom enclosure of the pp r tus
IMPORTANT SAFETY INSTRUCTIONS
1. Re d these instructions.
2. Keep these instructions.
3. Heed ll w rnings.
4. Follow ll instructions.
5. Do not use this pp r tus ne r w ter.
6. Cle n only with dry cloth.
7. Do not block ny ventil tion openings. Inst ll in ccord nce with the
m nuf cturer’s instructions.
8. Do not inst ll ne r ny he t sources such s r di tors, he t registers, stoves, or
other pp r tus (including mplifiers) th t product he t.
9. AC d ptor is used s disconnect device nd it should rem in re dily oper ble
during intended use. In order to disconnect the pp r tus from the m ins
completely, the AC d ptor should be disconnected form the m ins socket outlet
completely.
10. Only use tt chments/ ccessories specified by the m nuf cturer.
11. Use only with c rt, st nd, tripod, br cket, or t ble
recommended by the m nuf cturer, or sold with the product.
When c rt is used, use c ution when moving the c rt/ pp r tus
combin tion to void injury from tip-over.
12. Unplug this pp r tus during lightning storms or when unused for
long periods of time.
13. Refer ll servicing to qu lified service personnel. Servicing is required when the
pp r tus h s been d m ged in ny w y, such s power-supply cord or plug is
d m ged, liquid h s been spilled or objects h ve f llen into the pp r tus, the
pp r tus h s been exposed to r in or moisture, does not oper te norm lly, or h s
been dropped.
14. This ppli nce sh ll not be exposed to dripping or spl shing w ter nd th t no
object filled with liquids such s v ses sh ll be pl ced on the pp r tus.
15. Do not overlo d w ll outlet. Use only power source s indic ted.
16. Use repl cement p rt s specified by the m nuf cturer.

E
-
2
17. Upon completion of ny service or rep irs to this product, sk the service
technici n to perform s fety checks.
18. Power Sources - This product should be oper ted only from the type of power
source indic ted on the m rking l bel. If you re not sure of the type of power
supply to your home, consult your product de ler or loc l power comp ny. For
products intended to oper te from b ttery power, or other sources, refer to the
oper ting instruction.
19. Object nd Liquid Entry - Never push objects of ny kind into this product through
openings s they m y touch d ngerous volt ge points or short-out p rts th t could
result in fire or electric shock. Never spill liquid of ny kind on the product.
20. D m ge Requiring Service - Unplug this product from the w ll outlet nd refer
servicing to qu lified service personnel under the following conditions:
) When the power-supply cord or plug is d m ged,
b) If liquid h s been spilled, or objects h ve f llen into the product,
c) If the product h s been exposed to r in or w ter,
d) If the product does not oper te norm lly by following the oper ting instructions.
Adjust only those controls th t re covered by the oper ting instructions s n
improper djustment of other controls m y result in d m ge nd will often
require extensive work by qu lified technici n to restore the product to its
norm l oper tion.
e) If the product h s been dropped or d m ged in ny w y, nd
f) When the product exhibits distinct ch nge in perform nce - this indic tes
need for service.
21. The b ttery sh ll not be exposed to excessive he t such s sunshine, fire or the
like.
22. Minimum dist nces of 4 inches round the pp r tus for sufficient ventil tion.
23. The ventil tion should not be impeded by covering the ventil tion openings with
items, such s newsp pers, t ble-cloths, curt ins, etc.
24. No open fl me sources, such s lit c ndles, should be pl ced on the product.
25. The use of pp r tus in moder te clim tes.
26. Attention should be dr wn to the environment l spects of b ttery dispos l
SAVE THESE INSTRUCTIONS

E
-
3
COMPLIANCE WITH FCC REGULATIONS
This device complies with P rt 15 of the FCC Rules. Oper tion is subject to the
following two conditions:
(1) This device m y not c use h rmful interference, nd
(2) This device must ccept ny interference received, including interference th t m y
c use undesired oper tion.
This equipment h s been tested nd found to comply with the limits for cl ss B digit l
device, pursu nt to P rt 15 of the FCC Rules. These limits re designed to provide
re son ble protection g inst h rmful interference in residenti l inst ll tion. This
equipment gener tes uses nd c n r di te r dio frequency energy nd, if not inst lled
nd used in ccord nce with the instructions, m y c use h rmful interference to r dio
communic tions. However, there is no gu r ntee th t interference will not occur in
p rticul r inst ll tion. If this equipment does c use h rmful interference to r dio or
television reception, which c n be determined by turning the equipment off nd on, the
user is encour ged to try to correct the interference by one or more of the following
me sures:
- Reorient or reloc te the receiving ntenn .
- Incre se the sep r tion between the equipment nd receiver.
- Connect the equipment into n outlet on circuit different from th t to which the
receiver is connected.
- Consult the de ler or n experienced r dio/TV technici n for help.
CAUT ON: Ch nges or modific tions not expressly pproved by the p rty responsible
for compli nce could void the user’s uthority to oper te the equipment.
PROTECT YOUR FURN TURE!!
This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving
when you oper te the controls. These ‘feet’ re m de from non-migr ting rubber
m teri l speci lly formul ted to void le ving ny m rks or st ins on your furniture.
However cert in types of oil b sed furniture polishes, wood preserv tives, or cle ning
spr ys m y c use the rubber ‘feet’ to soften, nd le ve m rks or rubber residue on
the furniture.
To prevent ny d m ge to your furniture we strongly recommend th t you purch se
sm ll self- dhesive felt p ds, v il ble t h rdw re stores nd home improvement
centers everywhere, nd pply these p ds to the bottom of the rubber ‘feet’ before you
pl ce the product on fine wooden furniture.

E
-
4
DEAR JENSEN CUSTOMER
Selecting fine udio equipment such s the unit you've just purch sed is only the st rt
of your music l enjoyment. Now it's time to consider how you c n m ximize the fun
nd excitement your equipment offers. This m nuf cturer nd the Electronic Industries
Associ tion's Consumer Electronics Group w nt you to get the most out of your
equipment by pl ying it t s fe level. One th t lets the sound come through loud nd
cle r without nnoying bl ring or distortion nd, most import ntly, without ffecting
your sensitive he ring.
Sound c n be deceiving. Over time your he ring "comfort level" d pts to higher
volumes of sound. So wh t sounds "norm l" c n ctu lly be loud nd h rmful to your
he ring. Gu rd g inst this by setting your equipment t s fe level BEFORE your
he ring d pts.
To establish a safe level:
• St rt your volume control t low setting.
• Slowly incre se the sound until you c n he r it comfort bly nd cle rly, nd without
distortion.
Once you have established a comfortable sound level:
• Set the di l nd le ve it there.
T king minute to do this now will help to prevent he ring d m ge or loss in the
future. After ll, we w nt you listening for lifetime.
We Want You Listening for a Lifetime
Used wisely, your new sound equipment will provide
lifetime of fun nd enjoyment. Since he ring d m ge
from loud noise is often undetect ble until it is too
l te, this m nuf cturer nd the Electronic Industries
Associ tion's Consumer Electronics Group
recommend you void prolonged exposure to
excessive noise.
Customer's Record:
The seri l number of this product is found on its bottom. You should note the seri l
number of this unit in the sp ce provided s perm nent record of your purch se to
id in identific tion in the event of theft of loss.
Model Number: JCR-229 Serial Number:

E
-
5
ACCESSOR ES
1. Clock r dio
2. Power d ptor
3. User m nu l
LOCAT ON OF CONTROLS
1 ALARM 1 / VOLUME UP
BUTTON
10 ALARM 1 INDICATOR (RADIO)
2 ALARM 2 / VOLUME DOWN
BUTTON
11 ALARM 2 INDICATOR (ALARM)
3 BACK BUTTON 12 ALARM 2 INDICATOR (RADIO)
4 FORWARD BUTTON 13 BATTERY COMPARTMENT
5 DIMMER / SLEEP BUTTON 14 SPEAKER
6
POWER BUTTON 15
FM ANTENNA
7 LED DISPLAY 16 DC IN JACK
8 PM INDICATOR 17 USB CHARGING PORT
9 ALARM 1 INDICATOR (ALARM) 18 ALARM OFF / MEM/M+ / SET / Y-
M-D BUTTON

E
-
6
POWER SOURCE (AC ADAPTOR ONLY)
The JCR-229 is powered by n extern l AC-DC d ptor with n output of DC 5V
1500mA .
The unit is lso equipped with b ttery b ck-up system for the clock th t uses 1 x
CR2032 lithium b ttery (Not included).
POWER CONNECTION
1. Connect the cord of the power d ptor to the DC IN JACK (#16) of the JCR-229.
2. Plug the power d ptor into household w ll socket. The r dio is powered up nd
in st ndby mode when you see the displ y turn on.
Battery Back-up system
• The r dio is equipped with b ttery b ck-up system th t requires 3V CR2032
lithium b ttery (not included). Insert the b ttery into the BATTERY
COMPARTMENT (#13) nd m ke sure the positive nd neg tive (+ or -) sides of
the b ttery re in cont ct with the corresponding termin ls loc ted in the BATTERY
COMPARTMENT (#13).
• If power out ge occurs, the r dio utom tic lly switches to the b ttery power
supply nd keeps the clock nd timer settings.
• To open the BATTERY COMPARTMENT (#13), use screwdriver to loosen the
screw on the comp rtment door.
• When repl cing the b ttery, do not disconnect the power d ptor. Otherwise, ll
clock nd l rm settings will be lost.
WARN NG
DO NOT NGEST BATTERY, CHEM CAL BURN HAZARD
This product cont ins coin/button cell b ttery. If the coin/button cell b ttery is
sw llowed, it c n c use severe intern l burns in just 2 hours nd c n le d to de th.
Keep new nd used b tteries w y from children. If the b ttery comp rtment does not
close securely, stop using the product nd keep it w y from children.
If you think b tteries might h ve been sw llowed or pl ced inside ny p rt of the body,
seek immedi te medic l ttention.

E
-
7
SETT NG THE DATE AND T ME
The displ y will be fl shing when the unit is plugged in for the first time. T p the SET
BUTTON (#18) nd the displ y will stop fl shing nd go into st ndby mode.
Note: The JCR-229 h s D te nd Time fe ture, so you will be setting the Ye r,
Month nd D te prior to setting the time.
Setting the Date and Time
1. In st ndby mode, Press nd hold the SET BUTTON (#18) until the clock displ y
begins to fl sh.
2. The l st 2 digits of the ye r will be fl shing. Repe tedly T p the BACK BUTTON
(#3) /
FORWARD BUTTON (#4) to set the current ye r.
3. T p the SET BUTTON (#18) to confirm nd move on to setting the Month nd D y.
4. The first 2 digits fl shing re the month, nd the l st 2 digits re the d te.
Repe tedly T p the BACK BUTTON
(#3) to set the current month (1-12), nd
the FORWARD BUTTON (#4) to set the current d te (1-31).
5. T p the SET BUTTON (#18) to confirm nd move on to setting the Hours nd
Minutes.
6. The first 2 digits fl shing re the hours, nd the l st 2 digits re the minutes.
Repe tedly t p the BACK BUTTON
(#3) to set the hour nd the FORWARD
BUTTON (#4) to set the minutes.
Note: The PM indic tor (#8) in the top left corner of the displ y will light when the
hour is set to PM nd will be off when the hour is set to AM.
7. T p the SET BUTTON (#18) to confirm the time nd the displ y will stop fl shing.
Notes:
• M ke sure the hour is set correctly to AM or PM. The PM INDICATOR (#8) is
loc ted in the upper left corner of the LED DISPLAY (#7). If the PM INDICATOR
(#8) is lit, the displ yed time is “PM”. If the PM INDICATOR (#8) is not lit in the LED
DISPLAY (#7), the time displ yed is “AM”.
• The unit will utom tic lly s ve the settings nd exit the d te nd time set mode if
you do not t p the SET BUTTON (#18) within 5 seconds.
• In st ndby mode, repe tedly t p the SET BUTTON (#18) to review the Weekd y
(d1-d7*) – Ye r (l st 2 digits) – Month/d y – Time. The unit will utom tic lly
switch b ck to showing the current time fter 3 seconds once you stop pressing the
SET BUTTON (#18).
* d1 = Mond y, d2 = Tuesd y, d3 = Wednesd y, d4 = Thursd y, d5 = Frid y, d6 =
S turd y nd d7 = Sund y.

E
-
8
ALARM OPERAT ON
The JCR-229 fe tures du l l rm clock.
Setting the alarms:
1. In st ndby mode, press nd hold the ALARM 1 /ALARM 2 BUTTONS (#1/#2)
to enter the l rm time setting mode.
2. In the l rm time setting mode, press the ALARM 1 /ALARM 2 BUTTONS
(#1/#2) repe tedly to cycle through the setting options:
Al rm time > Al rm sound source > Al rm frequency
• Setting the alarm time : T p the BACK BUTTON (#3) repe tedly to set the
hour nd the t p the FORWARD BUTTON (#4) repe tedly to set the minute.
• Setting the alarm sound source : T p the BACK BUTTON (#3) or the
FORWARD BUTTON (#4) repe tedly to select w ke to l rm or w ke to
r dio. The corresponding l rm indic tor will turn on ccording to your
selection.
• Setting the alarm frequency : T p the BACK BUTTON (#3) or the
FORWARD BUTTON (#4) repe tedly to select n l rm frequency.
(1-5 = Mond y to Frid y, 1-7 = Everyd y, 1-1 = selected d y of week*, 6-7 =
S turd y & Sund y)
Note: Once 1-1 is selected, t p the BACK BUTTON (#3) or the FORWARD
BUTTON (#4) to select specific d y for the l rm ctiv tion (1 to 7 =
Mond y to Sund y).
When ll the l rm setting steps re completed, the l rm time will be set nd the
corresponding l rm indic tor ( l rm or r dio) will light.
Turning the alarms ON or OFF
When the unit is OFF, t p the ALARM 1 /ALARM 2 BUTTONS (#1/#2) to en ble
or dis ble the respective l rm. The corresponding ALARM 1 INDICATORS (RADIO
#10 or ALARM #9) or ALARM 2 INDICATORS (RADIO #12 or ALARM #11) will light
when the l rm is en bled.
Deactivating a sounding alarm
• Press ALARM OFF BUTTON (#18) to switch off the l rm sound.
• When the l rm sounds, the corresponding ALARM 1 INDICATORS (RADIO #10
or ALARM #9) or ALARM 2 INDICATORS (RADIO #12 or ALARM #11) will fl sh.
Notes:
• For setting one-d y l rm, just set the desired l rm time one d y before.
• The l rm will sound t the time set the d y prior. After h ving switched off the
l rm sound, t p the corresponding l rm button to dis ble the l rm (the l rm
indic tor will off).
• To set nother one-d y l rm, just repe t the bove steps.

E
-
9
SNOOZE FUNCT ON
When the l rm sounds, t p ny button on the top p nel to tempor rily turn off the
l rm nd ctiv te the snooze function, the l rm will stop nd sound g in 9 minutes
l ter. If you t p ny button on the top p nel g in, the l rm will tempor rily turn off
g in nd sound g in in 9 minutes nd so on.
NOTES:
• To tempor rily silence n l rm, press ny button on the top p nel. The l rm will
sound g in when the snooze period (9 minutes) expires.
• The corresponding Al rm 1 or Al rm 2 indic tor ( l rm or r dio) fl shes on the
displ y during the snooze period.
• To c ncel the snooze period nd the l rm, press the ALARM OFF BUTTON (#18).
RAD O OPERAT ON
Listening to the radio
1. Press the POWER BUTTON (#6) to turn on the JCR-229.
2. T p the BACK BUTTON (#3) or the FORWARD BUTTON (#4) to djust
frequency.
3. Press nd hold the BACK BUTTON (#3) or the FORWARD BUTTON (#4) to
utom tic lly tune to the next v il ble FM st tion.
4. T p the VOLUME UP BUTTON (#1) or the VOLUME DOWN BUTTON (#2) to
obt in the desired volume level.
5. Press the POWER BUTTON (#6) to turn the r dio off.
Notes:
• Use m nu l tuning to select we ker st tions th t might be skipped during
utom tic tuning.
• If the utom tic tuning does not stop on the ex ct frequency of the st tion, for
ex mple, it stops on 88.9 MHz inste d of 88.8 MHz, use the m nu l tuning method
to “fine tune” to the ex ct frequency of the desired st tion.
• To insure m ximum FM tuner reception, unwr p nd fully extend the FM
ANTENNA (#15) for best FM r dio reception
To set / recall the radio presets
1. Press the POWER BUTTON (#6) to turn on the JCR-229.
2. T p the BACK BUTTON (#3) or the FORWARD BUTTON (#4) to select the
desired st tion.
3. Press nd hold the MEM/M+/SET BUTTON (#18) until “P01” (or the next v il ble
preset slot shows on the LED DISPLAY (#7).
4. T p the BACK BUTTON (#3) or the FORWARD BUTTON (#4) to select
preset number (P01-P10).
5. Press the MEM/M+/SET BUTTON (#18) g in to confirm the preset.
6. Repe t steps 2 through 5 to preset up to 10 st tions.
7. To rec ll one of the preset st tions lre dy progr mmed, t p the MEM/M+/SET
BUTTON (#18) repe tedly until you re ch the desired preset number/r dio st tion.
Altern tively, press the MEM/M+/SET BUTTON (#18) once nd then press the
BACK BUTTON (#3) or the FORWARD BUTTON (#4) to select preset
st tion

E
-
10
SLEEP OPERAT ON
The sleep timer llows the unit turn off utom tic lly fter design ted time h s
el psed.
1. Press the POWER BUTTON (#6) to turn on the JCR-229.
2. Press the BACK BUTTON (#3) or the FORWARD BUTTON (#4) to select the
desired r dio st tion.
3. Press the SLEEP BUTTON (#5) to enter sleep mode.
4. Repe tedly t p the SLEEP BUTTON (#5) to select the sleep timer 10 – 20 – 30
- 40 – 50 – 60 - 70 – 80 – 90 - 00 (in minutes). The unit will pl y for the selected
length of time then turn off utom tic lly.
5. To c ncel the sleep timer, repe tedly t p the SLEEP BUTTON (#5) until the
timer shows 00.
6. To turn the unit “Off” before the selected length of time, press the POWER
BUTTON (#6) t ny time.
Note: To check the rem ining sleep time, t p the SLEEP BUTTON (#5) once.
CHANG NG THE D SPLAY CONTENT
• In st ndby mode, press the Y-M-D BUTTON (#18) repe tedly to show the d y of
week, ye r, month/d te nd time (d1 = Mond y, d2 = Tuesd y, d3 = Wednesd y,
d4 = Thursd y, d5 = Frid y, d6 = S turd y nd d7 = Sund y).
• In r dio mode, press the BACK BUTTON (#3) or the FORWARD BUTTON
(#4) once to briefly ch nge the displ y from the clock time to the current r dio
frequency.
D MMER OPERAT ON
In st ndby mode, press the DIMMER BUTTON (#5) repe tedly to select the
brightness settings of the displ y (High, Low or Off).
USB BATTERY CHARG NG
CONNECT NG A USB CORD (NOT NCLUDED) FOR CHARG NG YOUR CELL
PHONE (DC 5V 1000MA)
1. Plug the st nd rd end of the USB c ble (not included) into the USB CHARGING
PORT (#17) loc ted on the b ck of the JCR-229. Plug the other end of the c ble
into the device you wish to ch rge.
2. Observe the b ttery ch rge indic tor on your device to m ke sure the ch rging
process st rts norm lly.
3. Unplug the c ble when your device is fully ch rged.
WARN NG!
 The USB port loc ted on the b ck of the JCR-229 is designed for sm rt phone or
port ble device b ttery ch rging only nd does not support d t tr nsfer or
connection to computer.
 Don’t connect the USB port of the JCR-229 to nother USB ch rger. It m y
d m ge both units nd void the w rr nty.

E
-
11
CARE AND MA NTENANCE
• Cle n the r dio with soft d mp cloth nd let ll p rts dry completely fter
cle ning.
• Do not use ny ggressive cle ners, brushes with nylon bristles, sh rp or met llic
cle ning utensils, knives, h rd scr pers nd the like. They could d m ge the
surf ces of the r dio.
• Do not immerse the r dio in w ter nd do not let w ter getting into the housing of
the r dio.
• Unplug the power d ptor nd cle n the r dio before stor ge.
• Alw ys store the r dio in dry nd cle n pl ce.
SPEC F CAT ONS
Power: AC Ad ptor:
Input AC 100-240V ~
Output: DC 5V 1500mA
B ckup b ttery: 1 x 3V CR2032 (not included)
Frequency R nge: FM 87.5 – 108 MHz
TROUBLESHOOT NG GU DE
If you experience difficulties in the use of this clock r dio, ple se check the following or
c ll 1-800-777-5331 for Customer Service nd support .
SYMPTOM POSS BLE CAUSE POSS BLE SOLUT ON
Power does not come on Power d ptor connection is
unst ble
Reconnect the d ptor
No sound VOLUME control is turned
down
Incre se the Volume
Noise or the sound is
distorted listing to the
r dio
- The St tion is not tuned
properly
- The Antenn is not
extended
- Retune the st tion you
wish to listen to
- Fully extend the ntenn
No ch rging from the
USB port
The USB c ble is d m ged
or not securely tt ched
Repl ce the USB c ble or
try reconnect it g in
At Spectr , environment l nd soci l responsibility is
core v lue of our business. We re dedic ted to
continuous implement tion of responsible initi tives with
n im to conserve nd m int in the environment through
responsible recycling.
Ple se visit us t http://www.spectr intl.com/green.htm for more inform tion on
Spectr ’s green initi tives or to find recycler in your re .

E
-
12
90 DAY L M TED WARRANTY AND SERV CE
VAL D N THE U.S.A. ONLY
SPECTRA MERCHANDISING INTERNATIONAL, INC. w rr nts this unit to be free
from defective m teri ls or f ctory workm nship for period of 90 d ys from the d te
of origin l customer purch se nd provided the product is utilized within the U.S.A.
This w rr nty is not ssign ble or tr nsfer ble. Our oblig tion under this w rr nty is
the rep ir or repl cement of the defective unit or ny p rt thereof, except b tteries,
when it is returned to the SPECTRA Service Dep rtment, ccomp nied by proof of the
d te of origin l consumer purch se, such s duplic te copy of s les receipt.
You must p y ll shipping ch rges required to ship the product to SPECTRA for
w rr nty service. If the product is rep ired or repl ced under w rr nty, the return
ch rges will be t SPECTRA’s expense. There re no other express w rr nties other
th n those st ted herein.
This w rr nty is v lid only in ccord nce with the conditions set forth below:
1. The w rr nty pplies to the SPECTRA product only while:
. It rem ins in the possession of the origin l purch ser nd proof of purch se is
demonstr ted.
b. It h s not been subjected to ccident, misuse, buse, improper service, us ge
outside the descriptions nd w rnings covered within the user m nu l or non-
SPECTRA pproved modific tions.
c. Cl ims re m de within the w rr nty period.
2. This w rr nty does not cover d m ge or equipment f ilure c used by electric l
wiring not in compli nce with electric l codes or SPECTRA user m nu l
specific tions, or f ilure to provide re son ble c re nd necess ry m inten nce s
outlined in the user m nu l.
3. W rr nty of ll SPECTRA products pplies to residenti l use only nd is void when
products re used in nonresidenti l environment or inst lled outside the United
St tes.
This w rr nty gives you specific leg l rights, nd you m y lso h ve other rights which
v ry from st te to st te. TO OBTAIN SERVICE ple se remove ll b tteries (if ny) nd
p ck the unit c refully nd send it freight prep id to SPECTRA t the ddress shown
below. IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD shown
bove, ple se include proof of purch se (d ted c sh register receipt) so th t we m y
est blish your eligibility for w rr nty service nd rep ir of the unit without cost. Also
include note with description expl ining how the unit is defective. A customer
service represent tive m y need to cont ct you reg rding the st tus of your rep ir, so
ple se include your n me, ddress, phone number nd em il ddress to expedite the
process.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, ple se include check for
$12.00 to cover the cost of rep ir, h ndling nd return post ge. All out of w rr nty
returns must be sent prep id.
It is recommended th t you cont ct SPECTRA first t 1-800-777-5331 or by em il t
custserv@spectr intl.com for upd ted inform tion on the unit requiring service. In
some c ses, the model you h ve m y be discontinued, nd SPECTRA reserves the
right to offer ltern tive options for rep ir or repl cement.
SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North Norm ndy Avenue, Chic go, IL60634, USA. 1-800-777-5331
To register your product, visit the link on the website below to enter your inform tion.
http://www.spectr intl.com/wform.htm
0219 Printed in Chin