Jetson PIXEL User manual

PIXEL
3 WHEEL LIGHT-UP KICK SCOOTER

TABLE OF CONTENTS
What’s in the Box 1
Features & Specs 2
Assembly 3
Adjusting the Handlebar 4
Changing the Batteries 5
LED Lights 6
Riding the Pixel 7
Using the Rear Foot Brake 8
Care and Maintenance 9
Safety Warnings 10

1. WHAT’S IN THE BOX
1
2
4
5
6
7
1. FRONT WHEEL
2. STEM
3. STEM CLAMP
4. HANDLEBAR
5. LED LIGHT-UP DECK
6. REAR FOOT BRAKE
7. REAR WHEEL
3

2. FEATURES & SPECS
• Product Dimensions: 22.5” x 11” x 24”
• Handlebar Extension: Min: 24”; Max: 27”
• Deck Size: 11” x 4.5”
• Wheel Size: F: 125MM; R: 100MM
• Wheel Material: PVC Wheel with LED Lights
• Frame Material: Steel
• Product Weight: 4.2 lbs.
• Weight Limit: 100 lbs.
• Battery Type: 4 AAA (1.5V)
• Recommended Age: 3+
PIXEL

3.2
3. ASSEMBLY
3.1
Slide down
Push Button
will click
Press in

4. ADJUSTING THE HANDLEBAR
4.1 4.2
4.3
Open the
Stem Clamp
Press in
Lift (or lower)
Handlebar
Close
Stem Clamp
to lock
Wait
until it
clicks

5. CHANGING THE BATTERIES
BATTERY DOOR
1. Open the Battery Door with a screwdriver.
2. Place 4 AAA batteries inside.
3. Close the Battery Door with that same screwdriver.
4. You’re all set!
Battery Door

6. LED LIGHTS
LED LIGHT FUNCTIONS
• Step on the Deck to turn on the LED Deck Lights.
• The wheels are equipped with LED lights that will illuminate when riding,
no batteries necessary (it’s on the house).

7. RIDING THE PIXEL
• Place one foot in front.
• Place the other foot in back, at a 70-90° angle.
• Turn the handlebar to the left or right to make turns.

8. USING THE REAR FOOT BRAKE
8.1
8.2
Press down