John Thomas T-4254XBT User manual

ITEM NO.: T-4254XBT AND T-4254XBG
REVISED AUG 18, 2015
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 1 -
ASSEMBLY INSTRUCTIONS
Description
Item No.
: GATHERING BUTTERFLY LEAF TABLE
: T-4254XBT AND T-4254XBG

ITEM NO.: T-4254XBT AND T-4254XBG
REVISED AUG 18, 2015
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the store where purchased. If hardware is missing, or you need help with
assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
WARNING:
Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish of your
table. Protect the surface of the table with cloth if you are using any product with rubber feet or base .
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED
PART LIST T-4254XBT
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Top
1
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED

ITEM NO.: T-4254XBT AND T-4254XBG
REVISED AUG 18, 2015
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 3 -
PART LIST T-4254XBG
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following part
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
B
Side panel
2
C
Door frame
2
D
Bottom
panel
1
E
Shelf
1
F
Leg
Lx2, Rx2
4
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Bolt
(M6x45mm)
16
2
Small Lock washer
(6.5x11mm)
8
3
Small Flat
washer
(6.5x16mm)
8
4
Hexagon nut
(M8x13mm)
4
5
Large Lock
washer
8.5x13mm)
4
6
Large flat washer
(8.5x19mm)
4
7
Allen key
(4x80mm)
1
8
Wrench
(13mm)
1
9
Wood Knob
(35mm)
2
10
Pan head screw
(M4x28mm)
2
11
Long wood
screw
(M4x30mm)
4
12
Short wood screw
(M3.5x15mm)
4
13
L-bracket
(1x18x18mm)
2
NOTE: HARDWARE IS PACKED IN CARTON T-4254XBG

ITEM NO.: T-4254XBT AND T-4254XBG
REVISED AUG 18, 2015
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 4 -
STEP 1
Attach door frames (C) to legs (F) with bolts (1). Tighten with Allen key (7).
F
F
FC
C
7
1
STEP 2
Attach side panels (B) to bottom panel (D). Then attach them to legs (F) with bolts (1), washers (2)
and (3). Tighten with Allen key (7).
D
B
B
7
13
2

ITEM NO.: T-4254XBT AND T-4254XBG
REVISED AUG 18, 2015
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 5 -
STEP 3
Place the shelf (E) on top of side panels (B). Attach shelf (E) to side panels (B) with brackets (13) and
screws (12). Tighten with a screwdriver.
Attach shelf (E) to top of door frames (C) with screws (11) as shown below. Tighten with the
screwdriver.
Attach knobs (9) to doors with screws (10). Tighten with the screwdriver.
E
11
x4
10
x2
9
x2
12
x4
13
x2
11x4
12x2
10x2
9x2
STEP 4
Carefully attach top (A) to the base (from Step 3) with nuts (4), washers (5) and (6). Tighten with the
wrench (8).
A
6
5
4
8

ITEM NO.: T-4254XBT AND T-4254XBG
REVISED AUG 18, 2015
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 6 -
STEP 5
Unlock the table top from both sides underneath the top as shown below. Pull the 2 parts of the table
top apart. Place the leaves in the center of the open table top. Push the table top closed. Lock the
mechanism underneath 2 sides of the table top as shown below..