John Thomas BD-504FR User manual

ITEM NO. : BD-504FR
REVISED JUN 30, 2016
Printed in Vietnam
- 1 -
ASSEMBLY INSTRUCTIONS
BD-504FR AND BD-504FH AND BD-504FF BD-504FR AND BD-702FH AND BD-702FF
BD-504FR AND BD-201FH AND BD-201FF BD-504FR AND BD-703FH AND BD-703FF
Description
Item No
: FULL RAILS
: BD-504FR

ITEM NO. : BD-504FR
REVISED JUN 30, 2016
Printed in Vietnam
- 2 -
Thank you for purchasing this quality product. This product has been designed for easy assembly
and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to
beginning assembly, however, make sure all parts and hardware are included and free of obvious
defect. If a part is missing or defective, please contact the store where purchased. If hardware is
missing, or you need help with assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the
parts from being scratched.
-Remove all wrapping material, including staples & packing straps before you start to
assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
BEFORE ASSEMBLY
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED

ITEM NO. : BD-504FR
REVISED JUN 30, 2016
Printed in Vietnam
- 3 -
PART LIST BD-504FH AND BD-504FF
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
BD-504FH
(packed in
separate
carton)
1
B
BD-504FF
(packed in
separate
carton)
1
OR PART LIST BD-702FH AND BD-702FF
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
BD-702 FH
(packed in
separate
carton)
1
B
BD-702 FF
(packed in
separate
carton)
1
RT LIST BD-504FH OR BD-702FH AND BD-502FF OR BD-7
OR PART LIST BD-201FH AND BD-201FF
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
BD-201FH
(packed in
separate
carton)
1
B
BD-201FF
(packed in
separate
carton)
1

ITEM NO. : BD-504FR
REVISED JUN 30, 2016
Printed in Vietnam
- 4 -
OR PART LIST BD-703FH AND BD-703FF
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
BD-703 FH
(packed in
separate
carton)
1
B
BD-703 FF
(packed in
separate
carton)
1
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
C
Side Rail
2
D
Slat
5
E
Support
Leg
5
PART LIST BD-504FR
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Wood screw
(M4x35mm)
15
2
Allen key
(M4 x30mm x 120mm)
1
NOTE: HARDWARE IS PACKED IN CARTON BD-504FR

ITEM NO. : BD-504FR
REVISED JUN 30, 2016
Printed in Vietnam
- 5 -
STEP 1
Use the Allen key (2) to loosen the bolts and washers, as shown below.
Attach side rails (C) to headboard (A) and footboard (B) with bolts and washers (from step 1) as
shown below. Tighten with Allen key (2).
STEP 2

ITEM NO. : BD-504FR
REVISED JUN 30, 2016
Printed in Vietnam
- 6 -
Attach support legs (E) to slats (D) with screws (1), as shown below. Tighten with a screwdriver.
Attach slats (D) to side rails (C) with screws (1), as shown below. Tighten with a screwdriver.
STEP 3