John Thomas T-60RT User manual

ITEM NO: T-60RT
ISSUED JUL 09, 2014
Printed in Vietnam
- 1 -
ASSEMBLY INSTRUCTIONS
Description
Item No.
: 60” ROUND TABLE TOP
: T-60RT and T-7B (THIS BASE FOR ILLUSTRATION ONLY)

ITEM NO: T-60RT
ISSUED JUL 09, 2014
Printed in Vietnam
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the store where purchased. If hardware is missing, or you need help with
assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the pa rts from
being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
PART LIST T-60RT
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Top
1
NOTE: PLEASE REFER TO THE BASE FOR SPECIFIC ASSEMBLY INSTRUCTIONS
AND REQUIRED HARDWARE FOR ASSEMBLY

ITEM NO: T-60RT
ISSUED JUL 09, 2014
Printed in Vietnam
- 3 -
STEP 1
Use the Allen key to remove the mounting plate underneath the table top, as shown below.