Johnson MC-J5600 User instructions

MC
MCMC
MC-
--
-J5600
J5600 J5600
J5600 commercial setting guide
commercial setting guidecommercial setting guide
commercial setting guide
2015-10-19 Johnson Industries
1
This mode is used for setting and chair position adjust by the facility owner.
There are the following sub-functions:
1. Chair position adjust
2. Model setting
3. Parameter update (reclining disable)
4. Parameter update (normal course time)
5. Parameter update (quick course time)
6. Parameter update (child lock enable)
7. Monitor (usage time)
1. Summary
1. Summary1. Summary
1. Summary
The commercial setting mode will be start in the following operation:
1. The main power supply is On, and the console power is Off.
2. LEG STRETCH key and MANUAL key is pressed for more than 3 seconds,
after this operation, LED is displayed “--”
3. AIR STRENGTH key is pressed.
4. If commercial setting mode is started, display “A0” on LED.
2
22
2. How to
. How to . How to
. How to start commercial setting mode
start commercial setting modestart commercial setting mode
start commercial setting mode
3. Main menu
3. Main menu3. Main menu
3. Main menu
Select sub-menu and entry.
Key operation
Key Operation
Up Change sub menu (move to up item)
Down Change sub menu (move to down item)
WIDE Enter sub-menu
Power End commercial setting mode
Display
Position Description
7Seg Display sub-menu name
A0 : Chair position adjust
P0 : Setting model type
P1 : Setting reclining disable
P2 : Setting normal massage time
P3 : Setting quick massage time
P4 : Setting child lock enable
i0 : Monitor usage time

MC
MCMC
MC-
--
-J5600
J5600 J5600
J5600 commercial setting guide
commercial setting guidecommercial setting guide
commercial setting guide
2015-10-19 Johnson Industries
2
4. Chair position adjust
4. Chair position adjust4. Chair position adjust
4. Chair position adjust
Adjust chair position for reclining disable state.
Key operation
Key Operation
Reclining Up The backrest angle is moved to upper side.
Reclining Down The backrest angle is moved to lower side.
Footrest Up The footrest angle is moved to upper side.
Footrest Down The footrest angle is moved to lower side.
STOP End this sub-menu and return to main menu
Display
Position Description
7Seg “CP”
5. Parameter setting (model type)
5. Parameter setting (model type)5. Parameter setting (model type)
5. Parameter setting (model type)
Select model type from standard or commercial
The standard model do not effect from following parameter
When select commercial model type, following parameter is enable.
Key operation
Key Operation
Up The parameter will be changed to increase
Down The parameter will be changed to decrease
WIDE Save setting and return to main menu
STOP Cancel setting and return to main menu
Display
Position Description
7Seg Display model type setting
0 : standard model
1 : commercial model

MC
MCMC
MC-
--
-J5600
J5600 J5600
J5600 commercial setting guide
commercial setting guidecommercial setting guide
commercial setting guide
2015-10-19 Johnson Industries
3
6. Parameter setting (reclining disable)
6. Parameter setting (reclining disable)6. Parameter setting (reclining disable)
6. Parameter setting (reclining disable)
Setting parameter of reclining disable
Key operation
Key Operation
Up The parameter will be changed to increase
Down The parameter will be changed to decrease
WIDE Save setting and return to main menu
STOP Cancel setting and return to main menu
Display
Position Description
7Seg Display reclining disable setting
0 : enable reclining
1 : disable reclining
7. Parameter setting (normal massage time)
7. Parameter setting (normal massage time)7. Parameter setting (normal massage time)
7. Parameter setting (normal massage time)
Setting parameter of normal massage time (exclude the quick massage)
Key operation
Key Operation
Up The parameter will be changed to increase
Down The parameter will be changed to decrease
WIDE Save setting and return to main menu
STOP Cancel setting and return to main menu
Display
Position Description
7Seg Display and setting normal massage time.
0 – 30 : time of massage
8. Parameter setting (quick massage time)
8. Parameter setting (quick massage time)8. Parameter setting (quick massage time)
8. Parameter setting (quick massage time)
Setting parameter of quick massage time (only the quick massage)
Key operation
Key Operation
Up The parameter will be changed to increase
Down The parameter will be changed to decrease
WIDE Save setting and return to main menu
STOP Cancel setting and return to main menu
Display
Position Description
7Seg Display and setting quick massage time.
0 – 30 : time of massage

MC
MCMC
MC-
--
-J5600
J5600 J5600
J5600 commercial setting guide
commercial setting guidecommercial setting guide
commercial setting guide
2015-10-19 Johnson Industries
4
9. Parameter setting (child lock)
9. Parameter setting (child lock)9. Parameter setting (child lock)
9. Parameter setting (child lock)
Setting parameter of child lock
Key operation
Key Operation
Up The parameter will be changed to increase
Down The parameter will be changed to decrease
WIDE Save setting and return to main menu
STOP Cancel setting and return to main menu
Display
Position Description
7Seg Display and setting child lock.
0 : disable child lock
1 : enable child lock
9.1.. Child lock
9.1.. Child lock9.1.. Child lock
9.1.. Child lock function
functionfunction
function
If child lock function is enabled, user will be need to press child lock release key after power on by
console.
Key operation
Key Operation
Leg Stretch & Repeat If these keys press and hold over 3 second, child lock is released, transfer to select course state.
Power console power is change to off
STOP console power is change to off
Display
Position Description
7Seg “CL”

MC
MCMC
MC-
--
-J5600
J5600 J5600
J5600 commercial setting guide
commercial setting guidecommercial setting guide
commercial setting guide
2015-10-19 Johnson Industries
9. Monitor(usage time)
9. Monitor(usage time)9. Monitor(usage time)
9. Monitor(usage time)
Monitor for the usage time.
Key operation
Key Operation
STOP Return to main menu
Display
Position Description
7Seg
Clock
The usage time (per hour) is displayed by switching digit.
Name -> higher digit -> lower digit.
Example) if usage time is 123 hour, display at following:
uS
1
23
Item name
Higher digit
Lower digit