Jung Smart Control 5 User manual

Smart Control 5
06.12.20191 / 30024020101
Smart Control 5
Ref.-no.: SC 5 SW
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, re or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or load.
These instructions are an integral part of the product, and must remain with the end customer.
2 Structure of the device
2
4
6
1
23
4
5
Figures 1 and 2: Structure of the device
(1) Mounting screws
(2) Supporting frame
(3) Mounting hooks
(4) Smart Control
(5) Locking screws
(6) LAN/PoE
3 Function
Intended purpose
- Visualisation and operation of system statuses and information on building automation
- Installation vertical
- Installation in appliance box according to DIN 49073
Product characteristics
- KNX visualisation in combination with Visu Pro Server (ref.-no.: JVP-SERVER-H2, JVP-SENEC-H2)
- KNX visualization in combination with Smart Visu Server (ref.-no.: SV-SERVER-INT)
- eNet visualisation in combination with eNet server (ref.-no.: ENET-SERVER) with software version 2.2 or higher
- Door call function only in combination with Siedle Smart Gateway SG 650-.. or SG 150-..
- High performance HD screen
- Proximity sensor
- Graphical user interface
- Ambient light sensor
- Smart Gateway with integrated image storage
GB

Smart Control 5
06.12.20192 / 30024020101
4 Information for electrically skilled persons
Installation and electrical connection
DANGER
Electric shock from touching live parts in the installation environment.
An electric shock can be fatal.
Before working on the device, disconnect the power and cover live parts in the area.
2
4
6
1
23
4
5
5
Figures 1 to 3: Installation and electrical connection
Ensure correct orientation when installing the appliance box. Mounting screws (1) must be in vertical alignment.
• Mount supporting frame (2) in vertical orientation on the appliance box, mounting hooks (3) in front.
• Release locking screws (5).
• Connect LAN (PoE).
• Connect optional power supply.
• Place Smart Control (4) ush on supporting frame.
Adapt mounting hooks carefully in the provided notches in Smart Control.
• Tighten locking screws (g. 3).
5 Operation
Sidebar – Menu overview
- Door Communication (app)
- eNet Smart Home (app)
- JUNG Visu Pro Server (app)
- JUNG Smart Visu Server (app)
- Settings
- Network Conguration
- General Settings
- Password Protection
- Application Menu
- System Update
Selecting the default application
After connecting the device an app overview for selecting the default application is shown.
• Select default application and conrm with “Save”.
Application will start automatically after interruption of power supply, rmware updates or Siedle door call function.
Opening the sidebar
• Swipe from the right side of the touchscreen to the middle of it.
Sidebar opens.
Starting an app manually
Requirement: App visible in the sidebar
• Select app in the sidebar.
App starts.

Smart Control 5
06.12.20193 / 30024020101
Changing the default application
• Select menu “Settings“ in the sidebar.
• Select submenu “Application Menu“.
App overview is shown.
• Select default application and conrm with “Save”.
Default application is changed.
iThe visibility of apps can be changed with the eye symbol.
Changing the screen saver
• Select menu “Settings“ in the sidebar.
• Select submenu “General Settings“.
• Select submenu “Display“.
• Select “Daydream“.
Available screen savers are shown.
• Select screen saver and congure it, if necessary.
Screen saver is changed.
iThe time to the sleep of the display can be set in the app bar at the top.
Updating the rmware
Requirement: Internet connection
• Select menu “Settings“in the sidebar.
• Select submenu “System Update“.
Firmware is updating.
6 Technical data
Rated voltage DC 24 V SELV
Rated power < 1,5 W
Screen diagonal 127 mm / 5″
Resolution 720 x 1280
Frame dimensions (W x H) 81 x 132 mm
Power supply PoE (Power over Ethernet)
acc. to IEEE 802.3af or
DC 24 V via external power supply
(not included)
Processor Cortex-A53
Ambient temperature 0 ... +30 °C
7 Accessories
Power supply
ush-mounted NT 2405 VDC
for rail mounting NT 2415 REG VDC
8 Warranty
The warranty follows about the specialty store in between the legal framework as provided for by law.