Jura ENA X1 User manual

Instructions for Use
en
en
en
en
en

24
ENA X1
Your ENA X1
Control elements 26
Proper use 28
For your safety 28
1 Preparing and using for the first time 29
JURA on the Internet ...........................................................................................................................................29
3-colour plain text display..................................................................................................................................29
Setting up..............................................................................................................................................................29
Filling the water tank ..........................................................................................................................................29
Filling the bean container ..................................................................................................................................29
First-time use........................................................................................................................................................30
Using and activating filter..................................................................................................................................30
Determining and adjusting the water hardness.............................................................................................31
Adjusting grinder................................................................................................................................................. 32
Switching on the machine ................................................................................................................................. 32
Switching off the machine................................................................................................................................. 32
2 Preparation 32
Coffee..................................................................................................................................................................... 32
Hot water (tea) ..................................................................................................................................................... 33
3 Permanent settings in programming mode 33
Products ................................................................................................................................................................ 33
Energy Save Mode...............................................................................................................................................34
Automatic switch-off...........................................................................................................................................34
Switch-on rinse.....................................................................................................................................................35
Units of water....................................................................................................................................................... 35
Language............................................................................................................................................................... 35
4 Rinse 36
Rinse tips...............................................................................................................................................................36
Rinsing the machine ...........................................................................................................................................36
Cleaning the machine.........................................................................................................................................36
Changing the filter............................................................................................................................................... 37
Descaling the machine .......................................................................................................................................38
Cleaning the bean container ............................................................................................................................39
Descaling the water tank....................................................................................................................................39
5 Display messages 40
6 Troubleshooting 41
7 Transport and environmentally neutral disposal 42
Transport ...............................................................................................................................................................42
Disposal .................................................................................................................................................................42
8 Technical data 42
Index 42
JURA contact details / Legal information 44

25
ENA X1
Warnings:
JCAUTION
Always take note of any information
marked with the CAUTION or WARNING
symbol. The signal word WARNING
points out potential risk of serious
injury, and the signal word CAUTION
potential risk of slight injury.
CAUTION
The CAUTION symbol is used to draw
attention to circumstances which could
result in damage to the machine.
Symbols used:
TPrompt to take action. This symbol
means that you are being prompted to
perform an action.
EInformation and tips to make use of
your ENA even easier.
@References to the JURA website where
you can find interesting additional infor-
mation: www.jura.com.
Symbol description
en
en
en
en
en

26
ENA X1
1
2
3
4
5
6
7
10
9
8
1Water tank
2Filler funnel for cleaning tablet
3Coffee grounds container
4Drip tray
5Cup platform
6Bean container cover
7l Switch for hot water preparation
8Connector System©
9Hot-water nozzle
10 Rotating coffee spout
Control elements
ENA
Figure: ENA X1 Ristretto Black

27
ENA X1
1
4
5
2
3
6
7
1Q On/Off button
2Grinding wheel
3Cover
4P P button
5c Maintenance button
6g Rotary Switch
7Display
Figure: Open cover
en
en
en
en
en

28
ENA X1
Proper use
This machine has been designed and built for
domestic and similar use, e.g. for customers in
hotels, motels and other residential facilities. It
should only be used to prepare coffee and to heat
water. Use for any other purpose will be deemed
improper. JURA Elektroapparate AG cannot accept
any responsibility for the consequences of
improper use.
Before using the machine always carefully read
and comply with all these instructions. Keep this
manual close to the ENA and pass it on to the
next user if applicable.
For your safety
Please read and note the following important
safety information carefully.
This can prevent potentially fatal injury due to
electric shock:
Never use a machine which has been
damaged or which has a defective power
cable.
If there are any signs of damage, for example
if there is a smell of burning, unplug the
machine from the mains supply immediately
and contact the JURA service centre.
If the power cable for this machine is
damaged, it must be repaired either directly
by JURA or by a JURA approved service centre.
Make sure that the ENA and the power cable
are not located close to hot surfaces.
Be careful to ensure that the power cable
does not become trapped and does not rub
against sharp edges.
Never open and repair the machine yourself.
Do not modify the machine in any way that is
not described in the ENA manual. The
machine contains live parts. If opened, there
is a danger of fatal injury. Repairs may only be
carried out by JURA approved service centres,
using original spare parts and accessories.
Z
Z
Z
Z
Z
Z
There is a risk of scalds and burns from the spouts
or the nozzle:
Place the machine out of the reach of
children.
Do not touch any hot parts. Use the handles
provided.
Be careful to ensure that the appropriate
nozzle is correctly installed and clean. The
nozzle or parts of the nozzle could become
detached if the parts are not assembled
correctly or a blockage occurs.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
Never allow the power cable to hang down
loosely. The power cable could trip someone
or be damaged.
Protect your ENA from environmental
influences such as rain, frost and direct
sunlight.
Do not put the ENA, cable or connections in
water.
Do not put the ENA or any individual parts in
the dishwasher.
Turn your ENA off and disconnect the mains
plug before starting any cleaning operation.
Always wipe your ENA with a damp cloth,
never a wet cloth, and protect it from
constant water splashes.
Only connect the machine to a power supply
in accordance with the information on the
rating plate. The rating plate is located on the
underside of your ENA. Further technical
data is given in Chapter 8 ‘Technical data’.
Use only original JURA care products.
Use of products that are not explicitly
recommended by JURA could damage
the ENA.
Do not use any coffee beans treated with
additives or caramelised coffee beans.
Always fill the water tank with cold, fresh
water.
If you are absent for a prolonged period of
time, turn the machine off.
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z

29
ENA X1
Risk to children and persons with limited
capabilities in operating machines:
The machine is not designed to be operated
by children and persons with limited
capabilities.
The machine may only be used by persons
who are able to operate the machine safely.
Safe handling of the CLARIS Blue filter cartridge:
CLARIS Blue filter cartridges should be kept
out of the reach of children.
Store them dry in the sealed package.
Protect them from heat and direct sunlight.
Do NOT use damaged CLARIS Blue filter
cartridges.
Do NOT open CLARIS Blue filter cartridges.
1 Preparing and using for the first time
This chapter provides the information you need
for trouble-free use of your ENA and gives you a
step-by-step guide to preparing your ENA for your
first coffee experience.
JURA on the Internet
Visit us on the Internet.
At www.jura.com you will find the latest
interesting information about your ENA and
all facets of the world of coffee.
3-colour plain text display
Your ENA features a 3-colour plain text display.
The colours of the display texts have the following
meanings:
Green: Your ENA is ready for use.
Red: The ENA is prompting you to perform an
action.
Yellow: You are in programming mode.
Z
Z
Z
Z
Z
Z
Z
@
Z
Z
Z
Setting up
When setting up your ENA, please note the
following:
Place the machine on a horizontal surface
that cannot be damaged by water.
Select a position for the ENA where it is
protected against overheating.
Filling the water tank
To enjoy perfect coffee we recommend changing
the water every day.
CAUTION
Milk, mineral water or other liquids can damage
the water tank or the machine.
Only fill the water tank with fresh, cold
water.
Remove the water tank and rinse with cold
water.
Fill the water tank with cold, fresh water
and replace the tank.
Filling the bean container
CAUTION
Coffee beans which have been treated with
additives (e.g. sugar), pre-ground or freeze-dried
coffee will damage the grinder.
Only use untreated coffee beans to refill the
bean container.
Remove the bean container cover.
Remove any dirt or foreign objects from
the bean container.
Fill the bean container with coffee beans.
Close the bean container.
Z
Z
T
T
T
T
T
T
T
T
en
en
en
en
en

30
ENA X1
First-time use
The On/Off button also acts as a power
switch. When the ENA is switched off, the
machine consumes no standby energy.
WARNING
If the machine is operated with a defective power
cable, there is a danger of electric shock.
Never use a machine which has a defective
power cable.
Precondition: The water tank must be full.
Insert the mains plug into a power socket.
Q T Press the On/Off button to switch the
machine on.
SPRACHE DEUTSCH
g T Turn the Rotary Switch until LANGUAGE
ENGLISH is displayed.
k T Press the Rotary Switch to confirm the
language setting.
OK, the language is then adjusted.
OPEN TAP
Place a receptacle under the nozzle.
l T Turn the switch to position m.
SYSTEM FILLING
CLOSE TAP
E
J
T
T
T
y T Turn the switch to position o.
HEATING
PRESS ROTARY
Place a receptacle under the coffee spout.
k T Press the Rotary Switch to start rinsing.
RINSING, the system is being rinsed.
Rinsing stops automatically.
READY
When a coffee speciality has been
prepared for the first time, it is possible
that FILL BEANS appears on the
display as the grinder has not yet been
completely filled with coffee beans. In this
case prepare a different coffee speciality.
Using and activating filter
Your ENA no longer requires descaling if you use
CLARIS Blue filter cartridges.
Perform the ‘Insert filter’ operation without
interruptions. This will ensure optimum
function of your ENA.
After two months the filter capacity is
reached. The elapsed time can be checked
with the date plate on the filter holder.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
Press the P button Pand the Maintenance
button c simultaneously until RINSE
appears.
g T Turn the Rotary Switch until FILTER - is
displayed.
k T Press the Rotary Switch to enter theto enter the
programme item.
NO -
g T Turn the Rotary Switch until YES p
appears.
k T Press the Rotary Switch to confirm theto confirm the
setting.
OK
INSERT FILTER
Remove and empty the water tank.
Open the filter holder.
T
E
E
E
T
T
T
T

31
ENA X1
Insert the new filter cartridge into the water
tank, pressing it slightly.
Close the filter holder. It will click into place
audibly.
Fill the water tank with cold, fresh water
and replace the tank.
Place a receptacle (at least 500 ml) under
the nozzle.
k T Press the Rotary Switch.
OPEN TAP
l T Turn the switch to position m.
FILTER RINSING, water is discharged
from the nozzle.
Rinsing of the filter can be interrupted at
any time. To this purpose turn the switch
clockwise. To continue rinsing of the filter,
turn the switch to position m.
The water may be slightly discoloured. This
is not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically,
CLOSE TAP.
y T Turn the switch to position o.
HEATING
READY
The filter is now activated.
Determining and adjusting the water
hardness
The harder the water, the more frequently the
ENA requires descaling. It is therefore important
to adjust the water hardness.
T
T
T
T
E
E
It is not possible to adjust the water
hardness if the CLARIS Blue filter cartridge
is used and activated.
The water hardness can be adjusted
between 1° dH and 30° dH. It can also be
deactivated, which means that the ENA will
not indicate when it has to be descaled.
The Aquadur® test strip supplied as standard can
be used to determine the water hardness.
Hold the test strip briefly (for one second)
under running water.
Shake off the water.
Wait for approximately 1 minute.
Read the degree of water hardness from the
discolouration of the Aquadur® test strip
and the description on the packaging.
The water hardness can then be adjusted.
Example: Changing the water hardness from
16°dH to 25°dH.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
Press the P button Pand the Maintenance
button csimultaneously until RINSE
appears.
g T Turn the Rotary Switch until HARDNESS
is displayed.
k T Press the Rotary Switch to enter the
programme item.
16°dH
g T Turn the Rotary Switch until 25°dH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the water hardness is then adjusted.
HARDNESS
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
E
E
T
T
T
T
T
T
en
en
en
en
en

32
ENA X1
Adjusting grinder
You can adjust the grinder continuously to suit
the roast of your coffee.
CAUTION
If you adjust the fineness of grind when the
grinder is not operating, the grinding wheel could
be damaged.
Only adjust the fineness of grind when the
grinder is running.
The fineness of grind setting is correct if the
coffee flows regularly from the coffee spout. A
fine, thick crema is also formed.
Example: Adjusting the fineness of grind during
coffee preparation.
Place the cup under the coffee spout.
k T Press the Rotary Switch to start coffee
preparation.
Turn the fineness of the grinding wheel to
the desired position while the grinder is
running.
COFFEE, the pre-set amount of water
flows into the cup, preparation stops
automatically.
READY
Switching on the machine
When the ENA is switched on, a switch-on rinse
starts automatically.
Place a receptacle under the coffee spout.
T
T
T
T
Q T Press the On/Off button to switch the
ENA on.
HEATING
RINSING, the system is being rinsed. The
operation stops automatically.
READY
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a coffee speciality has been
prepared.
Place a receptacle under the coffee spout.
Turn the coffee spout to the cleaning
position.
Q T Press the On/Off button.
RINSING, the system is being rinsed, the
operation stops automatically. The ENA is
switched off.
Turn the coffee spout to the 1 cup or 2 cup
position.
The On/Off button also acts as a power
switch. When the ENA is switched off, the
machine consumes no standby energy.
2 Preparation
Coffee
During preparation, you can interrupt the
machine at any time. To do this, press the
Rotary Switch.
T
T
T
E
E

33
ENA X1
Precondition: READY is shown on the display.
Turn the coffee spout to the 1 cup position.
Place the cup under the coffee spout.
k T Press the Rotary Switch to start coffee
preparation.
COFFEE, the pre-set amount of water
flows into the cup. You can follow the
current status of preparation on the
progress bar.
Preparation stops automatically.
READY
Hot water (tea)
CAUTION
There is a danger of scalding from hot water
splashes.
Avoid direct contact with the skin.
Precondition: READY is shown on the display.
Place a cup under the nozzle.
l T Turn the switch to position m.
TEA, hot water flows into the cup.
You can follow the current status of
preparation on the progress bar.
Preparation stops automatically, CLOSE
TAP.
y T Turn the switch clockwise.
READY
T
T
J
T
T
3 Permanent settings in programming
mode
Products
The following settings can be programmed for
COFFEE and TEA:
Coffee:
Amount of water: 25 ML – 240 ML
Coffee strength: MILD, NORMAL,
STRONG
Temperature: NORMAL, HIGH
Tea:
Amount of water: 25 ML – 240 ML
Permanent settings in programming mode always
follow the same model.
Example: Changing the permanent setting for the
coffee strength (AROMA) of COFFEE from
NORMAL to STRONG.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
Press the P button Pand the Maintenance
button csimultaneously until RINSE
appears.
g T Turn the Rotary Switch until PRODUCT is
displayed.
k T Press the Rotary Switch to enter the
programme item.
COFFEE
To change the setting of tea, turn the
Rotary Switch until TEA is displayed.
k T Press the Rotary Switch to enter the
programme item.
WATER
g T Turn the Rotary Switch until AROMA is
displayed.
k T Press the Rotary Switch to enter the
programme item.
NORMAL
g T Turn the Rotary Switch until STRONG is
displayed.
k T Press the Rotary Switch to confirm the
setting.
Z
U
U
U
Z
U
T
T
E
en
en
en
en
en

34
ENA X1
OK, the coffee strength is then adjusted.
AROMA
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the
programme item.
COFFEE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the
programme item.
PRODUCT
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
Energy Save Mode
A default Energy Save Mode (E.S.M.©) setting can
be selected on the ENA:
ENERGY -
The ENA is constantly ready for use.
Coffee and hot water can be prepared
without having to wait.
ENERGY p
After approx. 5 minutes the ENA switches to
the energy-saving temperature and is not
ready for use.
Before coffee or hot water is prepared, the
machine heats up.
Example: Changing the energy-saving mode from
ENERGY p to ENERGY -.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
Press the P button Pand the Maintenance
button csimultaneously until RINSE
appears.
g T Turn the Rotary Switch until ENERGY p is
displayed.
k T Press the Rotary Switch to enter the
programme item.
ECONOMY p
g T Turn the Rotary Switch until ECONOMY -
is displayed.
Z
U
U
Z
U
U
T
T
k T Press the Rotary Switch to confirm the
setting.
OK
ENERGY -
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
Automatic switch-off
You can save energy with the automatic switch-
off function on the ENA. If this function is
activated, your ENA switches off automatically
after the pre-set time following the last action on
the machine.
The automatic switch-off time can be
adjusted between 0.5 and 9 hours or
deactivated.
Example: Changing the automatic switch-off time
from 2HRS to 1HRS.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
Press the P button Pand the Maintenance
button csimultaneously until RINSE
appears.
g T Turn the Rotary Switch until OFF AFTER
is displayed.
k T Press the Rotary Switch to enter the
programme item.
2 HRS
g T Turn the Rotary Switch until 1 HRS is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the automatic switch-off time is then
adjusted.
OFF AFTER
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
E
T
T

35
ENA X1
Switch-on rinse
In the programme item INIT RINSE the
following settings can be made:
MANUAL:The switch-on rinse has to be
started manually.
AUTOMATIC: The switch-on rinse starts
automatically.
Example: Changing the setting from
AUTOMATIC to MANUAL.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
Press the P button Pand the Maintenance
button csimultaneously until RINSE
appears.
g T Turn the Rotary Switch until INIT
RINSE is displayed.
k T Press the Rotary Switch to enter the
programme item.
AUTOMATIC
g T Turn the Rotary Switch until MANUAL is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK
INIT RINSE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
Units of water
The unit for the amount of water can be displayed
in either ‘ml’ or ‘oz’.
Example: Changing the units of water from
ML to OZ.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
Press the P button Pand the Maintenance
button csimultaneously until RINSE
appears.
g T Turn the Rotary Switch until UNIT is
displayed.
Z
Z
T
T
T
T
k T Press the Rotary Switch to enter the
programme item.
ML
g T Turn the Rotary Switch until OZ is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the units of water are then adjusted.
UNIT
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
Language
The language is selected when the machine is
used for the first time.
Example: Changing the language from
ENGLISH to DEUTSCH.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
Press the P button Pand the Maintenance
button csimultaneously until RINSE
appears.
g T Turn the Rotary Switch until LANGUAGE
is displayed.
k T Press the Rotary Switch to enter the
programme item.
ENGLISH
g T Turn the Rotary Switch until DEUTSCH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the language is then adjusted.
SPRACHE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
BEREIT
T
T
en
en
en
en
en

36
ENA X1
4 Rinse
The ENA has the following integrated rinse
programmes:
Rinse machine
Clean machine
Change filter
Descale machine
Clean or descale the machine or change the
filter whenever the appropriate indicator
lights up.
Rinse tips
To ensure a long service life and the best possible
coffee quality, the ENA requires the following daily
care:
Empty the coffee grounds container and drip
tray and rinse with warm water.
Rinse the water tank with clean water.
Wipe the surface of the machine with a damp
cloth.
Rinse the nozzle regularly if it is used to warm
or froth milk.
Rinsing the machine
The ‘Rinse machine’ operation can be manually
initiated.
Precondition: READY is shown on the display.
Place a receptacle under the coffee spout.
Turn the coffee spout to the cleaning
position.
Z
Z
Z
Z
E
Z
Z
Z
Z
T
T
Open the cover behind the Rotary Switch.
Press the P button Pand the Maintenance
button csimultaneously until RINSE
appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
k T Press the Rotary Switch to start rinsing.
RINSING, rinsing stops automatically.
READY
Turn the coffee spout to the 1 cup position.
Cleaning the machine
After 180 coffee preparations or 80 switch-on
rinses, the ENA will prompt you to clean the
machine. The ‘Clean machine’ operation can also
be manually initiated.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or detergent residues
could be left in the water.
Only use original JURA care products.
The cleaning programme only lasts about
15 minutes.
Do not interrupt the cleaning programme.
The quality of cleaning will be impaired if
you do so.
JURA cleaning tablets are available from
stockists.
Precondition: CLEAN / READY or READY is
displayed.
Open the cover behind the Rotary Switch.
Press the P button Pand the Maintenance
button csimultaneously until RINSE
appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
g T Turn the Rotary Switch until CLEAN is
displayed.
T
T
T
T
E
E
E
T
T

37
ENA X1
k T Press the Rotary Switch.
EMPTY TRAY
Empty the coffee grounds container and
drip tray and replace.
PRESS ROTARY
Turn the coffee spout to the cleaning
position.
Place a receptacle under the coffee spout.
k T Press the Rotary Switch to start cleaning.
CLEANING, water flows out of the coffee
spout.
The process is interrupted.
ADD TABLET
Open the filler funnel for cleaning tablet
and drop in a JURA cleaning tablet.
Close the filler funnel.
PRESS ROTARY
k T Press the Rotary Switch.
CLEANING, water flows out of the coffee
spout several times.
EMPTY TRAY
Empty the coffee grounds container and
drip tray and replace.
READY
Turn the coffee spout to the 1 cup position.
T
T
T
T
T
T
T
Changing the filter
After 50 litres of water have flowed through
the filter, its capacity is reached. The ENA
automatically prompts you to replace the
filter.
After two months the filter capacity is
reached. The elapsed time can be checked
with the date plate on the cartridge holder.
If the CLARIS Blue filter cartridge is not
activated, you will not be prompted to
change the filter.
The ‘Change filter’ operation can be manually
initiated.
Precondition: READY / FILTER or READY is
displayed.
Open the cover behind the Rotary Switch.
Press the P button Pand the Maintenance
button csimultaneously until RINSE
appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
g T Turn the Rotary Switch until FILTER is
displayed.
k T Press the Rotary Switch.
INSERT FILTER
Remove and empty the water tank.
Open the filter holder and remove the old
filter cartridge.
Insert the filter cartridge into the water
tank, exerting slight pressure.
Close the filter holder. It will click into place
audibly.
E
E
E
T
T
T
T
T
T
en
en
en
en
en

38
ENA X1
Fill the water tank with cold, fresh water
and replace the tank.
Place a receptacle (at least 500 ml) under
the nozzle.
k T Press the Rotary Switch.Press the Rotary Switch.
OPEN TAP
l T Turn the switch to position m.
FILTER RINSING, water is discharged
from the nozzle.
Rinsing of the filter can be interrupted at
any time. To this purpose turn the switch
clockwise. To continue rinsing of the filter,
turn the switch to position m.
The water may be slightly discoloured. This
is not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically,
CLOSE TAP.
y T Turn the switch to position o.
HEATING
READY
Descaling the machine
The ENA builds up limescale deposits over time
and automatically prompts you to descale the
machine when necessary. The degree of build-up
depends on the hardness of the water. The
‘Descale machine’ operation can be manually
initiated.
CAUTION
If the descaling agent comes into contact with the
skin or eyes, this can cause irritation.
Avoid contact with the skin or eyes.
If descaling agent does come into contact
with the skin or eyes, rinse off with clean
water. Should you get any descaling agent
in your eye, see a doctor.
T
T
E
E
J
T
T
CAUTION
Risk of damage to the machine and residues in
the water if the wrong descaling agent is used.
Only use original JURA care products.
CAUTION
Risk of damage to the machine if the descaling
operation is interrupted.
Do not interrupt the descaling operation.
CAUTION
Risk of damage if the descaling agent comes into
contact with sensitive surfaces.
Remove splashes immediately.
The descaling programme lasts approx.
40 minutes.
JURA descaling tablets are available from
stockists.
If a CLARIS Blue filter cartridge is used
and activated, you will not be prompted
to descale the machine.
Precondition: DE-SCALE / READY or
READY is displayed.
Open the cover behind the Rotary Switch.
Press the P button Pand the Maintenance
button csimultaneously until RINSE
appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
g T Turn the Rotary Switch until DE-SCALE
is displayed.
k T Press the Rotary Switch.
EMPTY TRAY
Empty the coffee grounds container and
drip tray and replace.
AGENT IN TANK
Remove and empty the water tank.
Completely dissolve the contents of one
blister (3 JURA descaling tablets) in a
T
T
T
E
E
E
T
T
T
T
T

39
ENA X1
container holding 500 ml of water. This
may take several minutes.
Fill the solution into the empty water tank
and replace the tank.
OPEN TAP
Carefully remove the nozzle from the
Connector System©.
Place a receptacle (at least 500 ml) under(at least 500 ml) under
the the Connector System©.
l T Turn the switch to position m.
DE-SCALING, water flows out of the
Connector System©several times.
CLOSE TAP
y T Turn the switch to position o.
DE-SCALING, the descaling operation
is continued.
EMPTY TRAY
Empty the coffee grounds container and
drip tray and replace.
Empty the receptacle and place it under the
Connector System©once more.
FILL WATER TANK
Remove the water tank, rinse thoroughly,
fill with fresh, cold water and replace the
tank.
OPEN TAP
l T Turn the switch to position m.
DE-SCALING, water flows out ofwater flows out of
the Connector System©several times.
The process is interrupted.
CLOSE TAP
y T Turn the switch to position o.
DE-SCALING, the descaling operation
is continued.
EMPTY TRAY
T
T
T
T
T
T
Empty the coffee grounds container and
drip tray and replace.
READY
Reattach the nozzle to the Connector
System©.
Cleaning the bean container
Coffee beans may be covered with a slight oil film
which remains on the walls of the bean container.
These residues may negatively affect the coffee
results. For this reason clean the bean container
from time to time.
Q T Press the On/Off button to switch the
machine off.
Disconnect the mains plug.
Remove the bean container cover.
Remove the coffee beans with a vacuum
cleaner.
Clean the bean container with a soft, dry
cloth.
Fill the bean container with fresh coffee
beans, then close the bean container cover.
Descaling the water tank
Limescale deposits may form in the water tank.
To ensure correct function of the machine,
descale the water tank from time to time.
Remove the water tank.
If a CLARIS Blue filter cartridge is used,
remove the cartridge.
Descale the tank with a mild, commercially
available descaling agent in accordance
with the instructions of the manufacturer.
Rinse the water tank thoroughly.
If a CLARIS Blue filter cartridge is used,
replace the cartridge.
Fill the water tank with cold, fresh water
and replace the tank.
T
T
T
T
T
T
T
T
T
T
T
T
T
en
en
en
en
en

40
ENA X1
5 Display messages
Message Cause/Result Action
FILL WATER TANK The water tank is empty.
You cannot prepare coffee nor
hot water.
Fill the water tank (refer to
Chapter 1 ‘Preparing and using
for the first time – Filling the
water tank’).
T
EMPTY GROUNDS The coffee grounds container is
full. You cannot prepare coffee,
but you can prepare hot water.
Empty the coffee grounds
container and the drip tray.
T
TRAY MISSING The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare coffee nor
hot water.
Insert the drip tray.T
FILL BEANS The bean container is empty.
You cannot prepare coffee nor
hot water.
Fill the bean container (refer to
Chapter 1 ‘Preparing and using
for the first time – Filling the
bean container’).
T
READY /CLEAN The ENA is prompting you to
clean the machine.
Clean the machine (refer to
Chapter 4 ‘Rinse – Cleaning the
machine’).
T
READY /DE-SCALE The ENA is prompting you to
descale it.
Descale the machine (refer to
Chapter 4 ‘Rinse – Descaling the
machine’).
T
READY /FILTER Once 50 litres of water have
flowed through the CLARIS Blue
filter cartridge, its capacity is
reached.
Replace the CLARIS Blue filter
cartridge (refer to Chapter 4
‘Rinse – Replacing the filter’).
T

41
ENA X1
6 Troubleshooting
Problem Cause/Result Action
Coffee only comes out in
drips during preparation.
Coffee has been ground
too finely and is blocking
the system.
Put the grinder on a coarser setting (see
Chapter 1, ‘Preparing and using for the
first time – Adjusting grinder’).
T
Water hardness cannot be
adjusted.
The CLARIS Blue filter
cartridge is activated.
Deactivate the CLARIS Blue filter
cartridge in programming mode.
T
FILL BEANS is displayed
although the bean container
has been filled.
The grinder is not yet
completely filled with
beans.
Prepare a coffee.T
FILL WATER TANK is
displayed although the water
tank is full.
The water tank float is
trapped.
Descale the water tank (refer to
Chapter 4 ‘Rinse – Descaling
the water tank’).
T
Grinder is making a very
loud noise.
There are foreign objects
in the grinder.
Contact your JURA service partner. The
contact details are given in the ‘JURA
contact details / Legal information’
section on the last page of these
instructions.
T
ERROR 2 is displayed. If the device is exposed to
the cold for a long period
of time, the heating
function is disabled for
safety reasons.
Wait until the machine has reached
room temperature.
T
Other ERROR messages are
displayed.
– Switch the ENA off with the On/Off
button. Contact your JURA service
partner. The contact details are given in
the ‘JURA contact details / Legal informa-
tion’ section on the last page of these
instructions.
T
If it was not possible to remedy the
problem, please contact your JURA service
partner. The contact details are given in the
‘JURA contact details / Legal information’
section on the last page of these instruc-
tions.
E
en
en
en
en
en

42
ENA X1
7 Transport and environmentally
neutral disposal
Transport
Keep the packaging of your ENA. It should be
used to protect the machine during transpor-
tation.
Disposal
Please dispose of old machines in an environmen-
tally neutral way.
H
Old machines contain valuable materials which
should be salvaged for recycling. Please therefore
dispose of old machines via your regional
collection system.
8 Technical data
Voltage 220–240 V ~, 50 Hz
Power 1450 W
Safety test S
Power consumption
ECONOMY -
Approx. 13.5 Wh
Power consumption
ECONOMY p
Approx. 8 Wh
Pump pressure Static max. 15 bar
Holding capacity of
water tank
1.1 l
Holding capacity of bean
container
125 g
Holding capacity of
coffee grounds container
Approx. 10 servings
Cable length Approx. 1.1 m
Weight Approx. 9.3 kg
Dimensions (W x H x D) 23.8 x 36 x 44.5 cm
Index
3-colour plain text display 29
A
Adjusting
Energy-saving mode 34
Grinder 32
Language 35
Units of water 35
Automatic switch-off 34
B
Bean container
Cleaning 39
Filling 29
C
Cleaning
Machine 36
Coffee
At the touch of a button 32
Coffee grounds container 26
Connector System©26
Contact 44
Cover 27
Bean container 26
Cup platform 26
D
Descaling
JURA descaling tablets 38
Machine 38
Water tank 39
Display 27
Messages 40
Disposal
Environmentally neutral disposal 42
Drip tray 26
F
Filler funnel for cleaning tablet 26
Filter
Changing 37
Using and activating filter 30
First-time use 30