JVC BN-V856U User manual

Charging the Battery Pack(BN-V856U)
Use the provided AC Power Adapter/Charger to charge the battery pack. The Battery Pack is rechargeable
even if it is not completely depleted.
For details on operation, refer to the notes on page 10 in the camcorder’s instructions.
To AC outlet
Charger indicator 1
Power lamp
Power cord
1
SUPPLY POWER TO CHARGER
Plug the AC Power Adapter/Charger’s power
cord in to an AC outlet.The power lamp
comes on.
2
ATTACH THE BATTERY PACK
Attach while making sure the marks
are facing down and aligned with the
corresponding marks on the AC Power
Adapter/Charger.
•The Charger Indicator 1 begins blinking to
indicate charging has started. (Charger
indicator 2 does not blink.)
•When blinking of the Charger indicator 1
stops blinking and remains lit, charging is
finished.
•Charging time is approximately 6 hrs. 30
min. (When the Battery Pack is completely
depleted.)
Using the Battery Pack (BN-V856U)
Core filter
Approximate recording time
LCD monitor off/Viewfinder on approx. 6 hrs.
LCD monitor on/Viewfinder off approx. 5 hrs.
3
DETACH THE BATTERY PACK
Slide the battery in the direction of the
arrow and lift off.
•When charging is finished, unplug the
Power cord from an AC outlet.
AC Power Adapter/
Charger AA-V80EK
BN-V856U
Additional Reference Manual
LYT0216-002A
Charger indicator 2
Using the Battery Pouch
•Using the provided Battery Pouch, you can carry the Battery Pack (BN-V856U) on your waist or
shoulder.
•Use the provided DC cord only.
1
PACKING THE DC CORD
4
SHOOTING WITH THE BATTERY
PACK HUNG FROM THE WAIST
OR SHOULDER
3
CONNECT THE DC CORD
2
INSERT THE BATTERY PACK
DC cord