JVC RMP-2580U - Remote Controller For Color... User manual

INSTRUCTIONS
REMOTE CONTROL UNIT
RM-P2580
For Customer Use:
Enter below the Model No. and Serial
No. which is located on the body. Retain
this information for future reference.
Model No. RM-P2580
Serial No.
SC96858-001
R
INTRODUCTION
BASIC OPERATIONS
APPLIED OPERATIONS
OTHER
CONNECTIONS
MENU SCREEN SETUPS

2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Information for USA
This device complies with Part 15 of the FCC Rules.
Changes or modifications not approved by JVC could void
the user's authority to operate the equipment.
The lightning flash with arrowhead symbol,
withinanequilateraltriangleisintendedtoalert
the user to the presence of uninsulated “dan-
gerous voltage”within the product's enclosure
that may be of sufficient magnitude to consti-
tute a risk of electric shock to persons.
The exclamation point within an equilateral tri-
angle is intended to alert the user to the pres-
ence of important operating and maintenance
(servicing) instructionsin the literature accom-
panying the appliance.
WARNING:TO REDUCETHE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCETO RAIN OR MOISTURE.
Changes or modifications not approved by JVC could void
the user's authority to operate the equipment.
This unit is designed for professional use only.
AVERTISSEMENT :
POUR EVITER LES RISQUES D’INCENDIE OU
D’ELECTROCUTION, NE PAS EXPOSER
L’APPAREIL A L’HUMIDITE OU A LA PLUIE.
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
This Class B digital apparatus meets all requirements of the
canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les
exigences du Réglement sur le matériel brouilleur du Canada.
Due to design modifications, data given in this instruction
book are subject to possible change without prior notice.
SAFETY PRECAUTIONS

3
1. INTRODUCTION
● CONTENTS.......................................................................................................................................... 3
● FEATURES........................................................................................................................................... 4
● ACCESSORIES ................................................................................................................................... 4
● PRECAUTIONS FOR PROPER OPERATION ..................................................................................... 4
● CONTROLS, CONNECTORS AND INDICATORS............................................................................... 5
2. BASIC OPERATIONS
● CAMERA SELECTION....................................................................................................................... 10
● POSITION SELECTION..................................................................................................................... 11
● MANUAL OPERATION....................................................................................................................... 12
● AUTO SEQUENCE OPERATION....................................................................................................... 13
● AUTO PAN OPERATION .................................................................................................................... 14
● AUTO PATROL OPERATION.............................................................................................................. 15
● KEY LOCK (PREVENTION OF OPERATION MISTAKE)................................................................... 16
3. APPLIED OPERATIONS
● ALARM OPERATION ......................................................................................................................... 17
● DATA OUTPUT ................................................................................................................................... 18
● CAMERA SWITCHING OPERATION................................................................................................. 18
4. CONNECTIONS
● BASIC SYSTEM (A MODE) ............................................................................................................... 19
● APPLIED SYSTEM (B MODE)........................................................................................................... 21
● REAR PANEL CONNECTORS .......................................................................................................... 23
5. MENU SCREEN SETUPS
● FLOW OF MENUS ............................................................................................................................. 25
● MENU OPERATION ........................................................................................................................... 26
● SETUP SCREEN (MAIN MENU)
POSITION SETUP SCREEN .......................................................................................................... 27
CAMERA SCREEN......................................................................................................................... 28
CONTROL UNIT SCREEN .............................................................................................................28
OPTION SCREEN..................................................................................................................... 29
DATA I/O SCREEN .................................................................................................................... 30
ALARM SCREEN ...................................................................................................................... 32
AUTO SEQUENCE SCREEN.................................................................................................... 32
6. OTHER
● TROUBLESHOOTING........................................................................................................................ 33
● SPECIFICATIONS.............................................................................................................................. 34
1. INTRODUCTION
CONTENTS
Thank you for purchasing the JVC RM-P2580.
These instructions are for the RM-P2580U.

4
䢇Presetting of up to 64 positions (including the home positions) each, for up to 8 combination cameras (TK-C675B).
䢇Built-in PAN, TILT and ZOOM control for up to 8 cameras.
䢇RS-485 connection system enables cascaded connection of cameras.
䢇Built-in sequential switcher.
䢇Alarm input terminals.
䢇Data I/O terminals for interlocked operation with external peripherals.
ACCESSORIES
1. INTRODUCTION
FEATURES
Precautions for the PRESET SEQUENCE and AUTO PAN Operations
The life-span of the PRESET SEQUENCE and AUTO PAN
functions is dependent on which camera model is used in
combination with this unit.
WhenusingaTK-C675B camera,theguaranteedzoomlens
operation count is 200,000 times. If the zoom lens opera-
tionis used often, the life-span ofthePRESETSEQUENCE
and AUTO PAN functions may be much less than expected.
(Example) Assuming that a ZOOM operation is performed
every minute and the camera is used 24 hours
a day:
200,000 x 2 (times) ÷60 (minutes) ÷24 (hours) = 277 (days)
Total operations count Daily operating hours
For other camera models, please refer to the Handling &
Installation Instructions manuals of the camera in use.
䢇Do not install the unit in a place subject to direct sunlight,
excessive moisture, dust, or vibrations where ventilation is
poor.
䢇Be careful of strong radio waves and magnetism:
If the unit is near a source of strong magnetism, such as a
radio or TV transmission antenna, power transformer or
motor, the video signal may be subject to interference.
䢇Always use the power cord provided with or specified for
this unit.
䢇CLEAN EXTERIOR
●Wipe gently with a soft cloth.
●Put cloth in diluted mild soap and wring it well to wipe off
heavy dirt.Then wipe again with a dry cloth.
PRECAUTIONS FOR PROPER OPERATION
Power cord (2 m) Ferrite Core Instructions (this manual)
INSTRUCTIONS
REMOTE CONTROL UNIT
RM-P2580
For Customer Use:
R
Enter below the Model No. and Serial
No. which is located on the body. Retain
this information for future reference.
Model No. RM-P2580
Serial No.
SETUP
MENUMENU SETSET
SPEEDSPEED
IRIS
AF
FOCUS
ZOOM
OPENOPEN
FARFAR
TELETELE CLEARCLEAR /ALL/ALL
7
4
1
8
0
5
2
9
6
3
ENTERENTER
AUTOAUTO
PANPAN
HOMEHOME FUNC-FUNC-
TIONTION
CAMERACAMERA POSI-POSI-
TIONTION
PRESETPRESET
SEQSEQ
CLOSECLOSE
NEARNEAR
WIDEWIDE
AUTOAUTO F-1F-1 F-2F-2 F-3F-3
PAN/TILTLENS CAMERA/POSITION
ALARMALARM
CAMERACAMERA POSITIONPOSITION
REMOTECONTROLUNIT RM-P2000
KEYLOCKKEY LOCK

5
1[MENU] button (with an indicator)
When this button is pressed, the MONITOR OUTPUT 1
‚on the rear panel outputs a menu screen and the indi-
cator with this button lights up.
REF. :“MENU SCREEN SETUP” on page 25.
2[SET] button
● While a normal screen is displayed (i.e. when a menu
screen is not displayed), pressing and holding this button
for more than 3 seconds generates a short beep, lights up
the KEY LOCK indicator 5and then puts the unit to the
KEY LOCK status.
In the KEY LOCK status, all buttons as well as the PAN/
TILT control lever #on the control panel are inactive.
To release the KEY LOCK status, press and hold the SET
button again for more than 3 seconds.
● While a menu screen is displayed, this button is used to
display a menu in a lower hierarchy level or to enter a set-
ting.
REF. :“MENU SCREEN SETUP” on page 25.
3[ALARM] indicator
This indicator blinks when an alarm signal is input.
REF. :“ALARM OPERATION” on page 17.
4[POWER] indicator
This indicator lights up when the POWER switchfion the
rear panel is set to ON.
5[KEY LOCK] indicator
This indicator lights up when the unit is in the KEY LOCK
status.
REF. :“2[SET] button”for the KEY LOCK status setting.
6[CAMERA] display
Shows the camera number of the camera signals output
from the MONITOR OUTPUT 1 connector ‚.
REF. :“CAMERA SELECTION” on page 10.
7[POSITION] display
Shows the position number of the camera signals output
from the MONITOR OUTPUT 1 connector ‚.
REF. :“POSITION SELECTION” on page 11.
1. INTRODUCTION
CONTROLS, CONNECTORS AND INDICATORS
[Control Panel]
SETUPSETUP
MENUMENU SETSET
SPEEDSPEED
IRISIRIS
AFAF
FOCUSFOCUS
ZOOMZOOM
OPENOPEN
FARFAR
TELETELE CLEARCLEAR /HOME/HOME
7
4
1
8
0
5
2
9
6
3
ENTERENTER
AUTOAUTO
PANPAN
OPTIONOPTION
1OPTIONOPTION 2
CAMERACAMERA POSI-POSI-
TIONTION
AUTOAUTO
PATROLPATROL
CLOSECLOSE
NEARNEAR
WIDEWIDE
AUTOAUTO F-1F-1 F-2F-2 F-3F-3
PAN/TILTPAN/TILTLENSLENS CAMERA/POSITIONCAMERA/POSITION
CAMERACAMERA POSITIONPOSITION
REMOTE CONTROL UNITREMOTE CONTROL UNIT RM-P2580RM-P2580
ALARM
POWER
KEY LOCK
1 2 4356 7

6
8[AUTO] button
When this button is pressed, the unit enters the AUTO SE-
QUENCE mode, in which the indicator lights up and the
MONITOROUTPUT1 connector ‚on therearpanelout-
putthecameravideosignalsaccordingtoautomaticswitch-
ing.
REF. :“AUTO SEQUENCE OPERATION” on page 13.
9[F1, F2, F3] Function buttons
These buttons are valid only when SW-D7000/SW-D8000
frame switchers are being used.
When this unit is operated in the B mode, these buttons
can control certain functions of the specific frame switcher
model connected to this unit. The RS-232C control is in-
volved in this control operation.
For details, please consult your dealer or JVC-authorized
service agent.
REF. :“APPLIED SYSTEM (B MODE)” on page 22.
F1: Single-screen select switch
Press this button to output a single-screen video from
the frame switcher.
Thecameranumbercanbeselectedusingthenumeric
keypad, etc.
F2: Split-screen select switch
Press this button to output a split-screen video from
the frame switcher.
F3: LIVE/PLAY switch
Pressthisbuttontoswitchbetweentheplaybackvideo
of a time-lapse VCR and the camera video.
0[CAMERA] button
Press when selecting a camera.
To select a camera, use the following buttons:
CAMERA button 0→Numeric key buttons *→
ENTER button &.
REF. :“CAMERA SELECTION” on page 10.
![POSITION] button
Press when selecting one of the position numbers preset
for the camera.
To select a position, use the following buttons:
POSITION button !→Numeric key buttons *→EN-
TER button &.
REF. :“POSITION SELECTION” on page 11.
@[OPTION 1, 2]
These buttons are not used for the present. Do not touch
them.
#[PAN/TILT] control lever
Operate the lever to pan (swing horizontally) or tilt (swing
vertically) the rotary turret of a camera.
8(Up) :Tilt the lever in this direction to tilt the rotary
turret upward.
9(Down):Tilt the lever in this direction to tilt the rotary
turret downward.
;(Right) :Tilt the lever in this direction to pan the rotary
turret toward the right.
:(Left) :Tilt the lever in this direction to pan the rotary
turret toward the left.
REF. :“MANUAL OPERATION” on page 12.
While a menu screen is displayed, this lever is used to
select or to set an item.
REF. :“MENU OPERATION METHOD” on page 26.
1. INTRODUCTION
CONTROLS, CONNECTORS AND INDICATORS (Continued)
SETUPSETUP
MENUMENU SETSET
SPEEDSPEED
IRISIRIS
AFAF
FOCUSFOCUS
ZOOMZOOM
OPENOPEN
FARFAR
TELETELE CLEARCLEAR /HOME/HOME
7
4
1
8
0
5
2
9
6
3
ENTERENTER
AUTOAUTO
PANPAN
OPTIONOPTION
1OPTIONOPTION 2
CAMERACAMERA POSI-POSI-
TIONTION
AUTOAUTO
PATROLPATROL
CLOSECLOSE
NEARNEAR
WIDEWIDE
AUTOAUTO F-1F-1 F-2F-2 F-3F-3
PAN/TILTPAN/TILTLENSLENS CAMERA/POSITION
CAMERACAMERA POSITIONPOSITION
REMOTE CONTROL UNITREMOTE CONTROL UNIT RM-P2580RM-P2580
ALARMALARM
POPOWERWER
KEY LOCKKEY LOCK
*&(
¤
⁄
)
‹
$^ %
9
@
#
0
8
!

7
The AUTO PATROL function can be set on a per-camera
basis.
REF. :“AUTO PATROL OPERATION” on page 15.
%[–, +] Negative and positive buttons
Press button to decrease or increase the camera or posi-
tion number.
^[AUTO PAN] button
Pressthis buttonto rotate or swing acamerabetween pre-
set positions at a preset time interval.
1. INTRODUCTION
CONTROLS, CONNECTORS AND INDICATORS (Continued)
$[AUTO PATROL] button
Press this button to switch the camera positions automati-
cally in a preset order and at preset time intervals.
ThePOSITION displaybe-
comesasshownonthe left
during AUTO PATROL.
REF. :“AUTO PAN OPERATION” on page 14.
&[ENTER] button
Press to enter a figure input using the numeric key buttons
*.
*[1 to 0/HOME] Numeric key buttons
Usethese buttonsto choose a cameraorposition number.
([CLEAR] button
Press to clear an input figure before it is entered by press-
ing the ENTER button.
)[ZOOM WIDE,TELE] ZOOM control buttons
Press and hold to control the ZOOM operation of the cam-
era lens.
WIDE: Zooms out and widens the image.
TELE: Zooms in and narrows the image.
⁄[FOCUS NEAR, FAR] FOCUS control buttons
● Pressandholdtocontrolthe FOCUS operationofthe cam-
era lens.
NEAR:Brings a near object in focus.
FAR : Brings a distant object in focus.
● AF (AUTO FOCUS)
When the NEAR and FAR buttons are simultaneously
pressed and held for about 1 second, a short beep is gen-
erated and the object is automatically brought into focus.
ThePOSITION displaybe-
comesasshownonthe left
during AUTO PAN.
¤[IRIS CLOSE, OPEN] Iris control button.
Press and hold to control the lens iris.
CLOSE : Closes the lens iris.
OPEN : Opens the lens iris.
‹[SPEED] Speed button and indicators
Press to set the speed of the ZOOM and FOCUS control
operations.
Each press of the button changes the operation speed.
POSITION
POSITION
: Low speed : Medium speed : High speed
NOTE
When the power is turned on, the operation speed is
medium.
NOTE
If the camera being selected does not incorporate the
AUTO FOCUS function, this function is not available
even when the short beep is generated.Be sure to use
this function while observing the monitor screen.

8
›[AC`INPUT] AC power input connector
Connect to a conventional 120 V AC power supply using
the provided power cord.
fi[POWER] switch
Turns the power of the unit ON and OFF.When this switch
is set to ON, the POWER indicator 4on the front panel
lights up.
fl[TO CAMERA] Camera control signal connectors
Connection terminals for use in controlling the cameras.
Thecontrolcommunicationsuse the multi-drop,full-duplex
communication system (RS-485).
REF. :“REAR PANELCONNECTORS (TOCAMERA)”on
page 23.
‡[DATA I/O] Data signal input/output terminals
Connectionterminalsforusebythe alarminput/outputand
select output signals.
Connect the CAMERA SW terminal to a time-lapse VCR.
REF. : “REAR PANEL CONNECTORS (DATA I/O)” on
page 24.
[SERIAL-1] External extension connector 1
(D-sub 9-pin male connector)
Use this connector when connecting an external compo-
nent such as an alarm unit.
REF. :“REAR PANELCONNECTORS (SERIAL-1, -2)”on
page 23.
Contact your JVC sales agent for details.
·[SERIAL-2] External extension connector 2
(D-sub 9-pin male connector)
Usethis connector when controlling aframe switcher(SW-
D7000/SW-D8000).
REF. :“REAR PANELCONNECTORS (SERIAL-1, -2)”on
page 23.
‚[MONITOR OUTPUT 1] Video signal output con-
nector 1
Outputs the video signal selected with this unit.
Connect to the video monitor, etc.
This connector also outputs the video signal, which car-
ries the on screen menu.
¡[MONITOR OUTPUT 2] Video signal output con-
nector 2
Connect to a time-lapse VCR, etc.
The camera video signal output from this connector is
switched according to the switching signal input at the
CAMERA SW IN terminal ‡.
WhenthisunitisoperatedintheBmode( REF. :Page21):
This connector outputs the same signal as the MONITOR
OUTPUT 1 connector ‚.
™[VIDEO INPUT]Video signal input connectors
These connectors input the video signals from the cam-
eras.
When this unit is operated in the B mode, apply the output
signal from a frame switcher to the VIDEO INPUT 1 con-
nector.
REF. :“BASICSYSTEM”onpage19,“APPLIEDSYSTEM”
on page 21.
£[VIDEO OUTPUT]Video signal output connectors
Each of these connectors outputs the video signal corre-
sponding to the VIDEO INPUT connector ™above it.
Connect these connectors to a video device such as a
monitor.
¢DIP switch
Used to switch the system mode or the standard applied
to the SERIAL-1 and -2 connectors.
REF. :“REAR PANELCONNECTORS(DIPSWITCH)”on
page 23.
1. INTRODUCTION
CONTROLS, CONNECTORS AND INDICATORS (Continued)
[Rear Panel]
1
TO CAMERATO CAMERA DATA I / ODATA I / O
RXRX+RXRX
-
TXTX+TXTX
-
COMCOM 1 2 3 4 5 6 7 8 COMCOM 9/19/1 10/210/2 11/311/3 12/412/4 13/513/5 14/614/6 15/715/7 16/816/8 COMCOM COMCOM COMCOM
CAMERACAMERA
SWSW
UNITUNIT
ALARM AUTOAUTO
431 2 875 6
2 3 4 5 6 7 8
1
MONITOR
OUTPUT MONITOR
SERIAL-2SERIAL-2SERIAL-1SERIAL-1
VIDEO INPUT
VIDEO OUTPUTVIDEO OUTPUT
OUTPUT
2
1
ONON
2 3 4 5 6 7 8
POWER
OFF
ON
AC INPUT
`
£
fl ‡ °
›
fi
·
¢
‚
¡
™
°

9
2. BASIC OPERATIONS
Manual Operation
Camera Selection ( REF. :Page 10)
Switching to the selected camera video.
Pan/Tilt Operation ( REF. : Page 12)
(TILT)Tilts the camera up and down,
(PAN)Pans thecamerainthe left and
right directions.
Position Selection ( REF. : Page 11)
Switching the camera to the selected video position.
OperationoftheCameraIRIS
(Brightness), FOCUS (focus-
ing)andZOOM(screen size).
Lens Operation ( REF. : Page 12)
Automatic Operation
Auto Sequence ( REF. : Page 13)
The scene captured by cameras 1 to 8 is automatically switched in a preset time interval.
Auto Panning ( REF. : Page 14)
Thecameramovesautomaticallyandslowlybetween2points
in a horizontal direction.
Auto Patrol ( REF. : Page 15)
Moves the camera through many positions in a high-speed
manner.
18ENTER
CAMERA
1/HOME
0ENTER
POSI-
TION
PAN/TILT
IRIS
AF
FOCUS
ZOOM
OPENOPEN
FARFAR
TELETELE
CLOSECLOSE
NEARNEAR
WIDEWIDE
Camera 1
scene Camera 8 scene
Camera 2
scene
AUTO
Slowly
Stop
position
scene
Start
position
scene
AUTO
PAN
High-speed
High-speed High-speed
High-speed
Position
1
Position
2
Position
3
Position
4
AUTO
PATROL

10
Selecting a Desired Camera
2. BASIC OPERATIONS
CAMERA SELECTION
1. Press the CAMERA button so that the indicator lights up.
2. Input the camera number using the numeric keys (0 to 9).
The input figure is shown in the
CAMERA display together with
aperiod after it.(Example:When
“8” is input)
To clear the input figure, press
the CLEAR button.
3. PresstheENTERbuttontoenter the input cameranumber.
The video of the selected camera will be output from the
MONITOR OUTPUT connectors on the rear panel.
Atthistime,theperiod intheCAMERAdisplaydisappears
and the POSITION display shows the camera operation
details (position, fixed camera, AUTO PATROL, AUTO
PAN, etc.).
NOTES
●When no camera is connected to a camera number,
the camera number is skipped.
●Be sure to set each camera ID to the same number
as the corresponding VIDEO INPUT connector. Er-
roneous settings may cause operational difficulties.
4. To view the video of the next camera number, press the +
button.To view the video of the previous camera number,
press the – button.
CLEARCLEAR /HOME/HOME
7
4
1
8
0
5
2
9
6
3
ENTERENTER
AUTOAUTO
PANPAN
OPTIONOPTION
1OPTIONOPTION 2
CAMERACAMERA POSI-POSI-
TIONTION
AUTOAUTO
PATROLPATROL
AUTOAUTO F-1F-1 F-2F-2 F-3F-3
PAN/TILTPAN/TILT CAMERA/POSITIONCAMERA/POSITION
CAMERACAMERA POSITIONPOSITION
REMOTE CONTROL UNITREMOTE CONTROL UNIT RM-P2580RM-P2580
ALARMALARM
POPOWERWER
K
EY LOCK
K
EY LOCK
CAMERA
button
Numeric key
buttons
+ buttonCLEAR button
ENTER button
- button
CAMERA display POSITION display
CAMERA
Period
Camera operation details
NOTES
●“Camera video” is one of the video signals input to
theVIDEOINPUTconnectorofthisunitor to the frame
switcher.
●In the case of the B mode in which the output video is
controlledbytheframeswitcher,inordertoallowcam-
era selection from this unit, connect the SERIAL-2
connector on the rear panel of the unit with the RS-
232C connector of the frame switcher. (SW-D7000/
SW-D8000)( REF. :“APPLIEDSYSTEM (B MODE)”
on page 22.)
POSITION POSITION
POSITION POSITION
Fixed camera display
Position display
(Example with the
home position)
AUTO PATROL
( REF. : Page 15)
AUTO PAN
( REF. : Page 14)