JWA CATANIA 68458 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
ITEM CODE 68458
CATANIA STORAGE LAMP TABLE
380MM
450MM

Allow 10 min For 1 person Addional tools required
2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when liing. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instrucons carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over ghten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instrucons for future reference.

3
PARTS LIST
A
1pcs
B
1pcs
C
4pcs
D
2pcs
1
2
M4X12mm M4X10mm
2
1
TOP PANEL
STORAGE BOX

4
STEP 1:
STEP 2:
A
A
C
C
D
D
B
B
1
Aach metal parts with screws(D).
Aach metal parts to the body with screws(C).

5
STEP 3:
ASSEMBLY COMPLETE
2
1
Put top panel on the box.

6
To protect your furniture, we suggest the following:
REGULAR CARE:
• Protect from direct sunlight
• Vacuum regularly using low suction
• Rotate reversible cushions regularly
• Avoid exposure to new clothing, cushions or throws as this
may lead to dye transfer and permanent staining
CLEANING:
• Do not remove cushion covers for separate cleaning even though
they may have zippers
• Do not wash, Do not dry clean, Do not shampoo clean
• Clean only with hot water extraction machine.
Professional cleaning recommended
• Do not use dishwashing liquid or laundry detergent.
Use only upholstery detergents
• Do not wet filling
• Dry in shade away from direct heat and sunlight
• Allow to dry thoroughly before re-use
SPOT CLEANING:
• Do not rub
• Do not spot clean with any solvent
• Treat spills and stains as soon as possible
• Gently scrape off any soil or blot any liquid from the surface of the
fabric before applying cleaner
• Apply proprietary cleaning agents strictly according to instructions to
remove the residue of the spill
• Do not saturate the fabric or interior with water or other cleaning liquids
WARNING:
Apply only water-based soil resist (fabric protection) treatments.
Do not use aerosol products
* PILLING IS NOT A FABRIC DEFECT OR FAULT AND IS NOT
COVERED BY WARRANTY
* PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR
AND TEAR AND DOES NOT AFFECT THE DURABILITY OR
FUNCTIONALITY OF THE FABRIC AND IS EASILY REMOVED