JWA HEDWIG 73674 User manual

ASSEMBLY INSTRUCTION
HEDWIG Entertainment Unit
ITEM COD E 73674
Imported by JWA Furniture Pty Ltd, Brisbane Qld Australia.
For any assistance with assembly or for missing parts please refer to your receipt
2021-09-15 1 item code:73674
mm
mm
mm

Allow 30 min For 2 person Addi onal tools required
2021-09-15 2item code:73674
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when liing. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instrucons carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over ghten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instrucons for future reference.

2021-09-15 3item code:73674

PARTS LIST
2021-09-15 4 item code:73674
1
2
3
4
5
TOP PANEL
BOTTOM PANEL
SIDE PANEL
MIDDLE PANEL
BACKP LANE
LAMINATES
6
7
8
9
10
MIDDLE PANEL
FEET
11
12
DOOR PANEL
SIDE PANEL
FEET
DOOR PANEL

2021-09-15 5 item code:73674
Fix panel (4)(6) to panel (7) with cam lock (B) and dowels (D).
Srew panel (1)(4)(6) with cam pin(A)
Screw plastic holder of push open to panel(1) with srew (E)
Insert the push open to plastic holder from the side as shown

2021-09-15 6item code:73674
Fix panel (3)(4)(5)(6) to panel (1) with cam lock (B) and dowels (D).
Insert panel (8)x2 into grooves between panel
(3)(5)(6).

2021-09-15 7 item code:73674
Attach panel (2) to panel (3)(4)(5)(6) with screw (C)
as shown.
Using allen key(H) to turn screw (C) clockwise to tighten
Attach metal (J) to panel 2 with screw(E) as shown

2021-09-15 8item code:73674
.
Glue (M) to wood leg(9) and and turn the leg into metal part(J) closewise
Turn part(L) to middle leg (10) and fix leg(10) to panel(2) with screw (C)
by allen key(H)
Insert back panel hook(I)to the back and screw with (E)
Fix (P)*2 to top panel (1) with screw(E)as shown.

2021-09-15 9item code:73674
9Fix hinge (F) on panel (11)(12) with screw(E) as shown.
Adjust hinge(F) on the door as shown.
Fix metal part of (K) to panel (11)(12) with screw (E) as shown
Fix wall fixation to wall with (N) and (O) as shown

To protect your furniture, we suggest the following:
• Avoid placing your furniture in direct sunlight.
• Do not place furniture directly under windows.
• Do not place sharp materials (knife, fork, etc.) directly onto
your furniture as sharp material may scrape and damage the
finish.
• Do not place material with high temperature directly onto the
surface of your furniture.
• Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
• Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
NOTE: If the above care advise is not adhered to your product
warranty may become void
2021-09-15 10item code:73674