JWA VERBENA 68477 User manual

ASSEMBLY INSTRUCTION
VERBENA DESK
ITEM CODE 68477
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
1

PRE-ASSEMBLY PREPARATION
Before you start:
.
Allow 30 min For 2person Addi ꢀ onal tools required
2

A
E
I
B
F
J
C
G
K
D
H
M15X12mm M7X39mm M8X30mm M5X40mm
14pcs 14pcs
16pcs
4pcs
36pcs
16pcs
1pcs
16pcs
M8X35mm
16pcs M7X70mm 4pcs
L
M8X50mm
4pcs
1pcs
1pcs
M N O
M4x30mm M3.5x14mm 1pcs 1pcs
1
2
3
4
LEG
LEG
LEG
LEG
10 DRAWER SIDE PANEL
11
12
13
14
DRAWER SIDE PANEL
DRAWER BACK PANEL
TOP PANEL
5
6
7
8
SIDE PANEL
SIDE PANEL
BACK PANEL
DRAWER SIDE PANEL
15
16
DRAWER SIDE PANEL
DRAWER BACK PANEL
SUPPORT PANEL
TOP PANEL
17 DRAWER BASE
9DRAWER FRONT
18
3

STEP 1:
STEP 2:
4

STEP 3:
5

STEP 4:
STEP 5:
6

STEP 6:
STEP 7:
7

STEP 8:
STEP 9:
8

STEP 10
9

STEP 11:
ASSEMBLY COMPLETE
10

SAFETY BRACKETS
INSTRUCTIONS
1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to
attach the Mounting Plate into a stud. If mounting into brick or masonry you
will need to acquire wall anchors.
2. Attach the second Mounting Plate to the furniture frame with the Short
Screws.
3. Move the furniture to its final position. Thread a Wall Strap through the both
Mounting Plates and tighten until snug. Do not over tighten.
4. Make sure that the Mounting Plates are firmly attached to the wall and
furniture and that the Wall Strap is snug.
HARDWARE
Mounting Plate x 2 Wall Strap x 1 Large Screw x 2 Small Screw x 2
Back side
Wall
N
11

To protect your furniture, we suggest the following:
•Avoid placing your furniture in direct sunlight.
•Do not place furniture directly under windows.
•Do not place sharp materials (knife, fork, etc.) directly onto
your furniture as sharp material may scrape and damage the
finish.
•Do not place material with high temperature directly onto the
surface of your furniture.
•Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
•Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
NOTE: If the above care advise is not adhered to your product
warranty may become void
12