JWA Dean 75112 User manual

Tall Wide Bookcase
ITEM CODE 75112
DEAN
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt

M3.5x14mm
30pcs

x2
P1
P1
P2
P2
P1
P2
Top panel
Left layer panel
Right layer panel
Low layer panel
Bottom panel
Left panel
Bottom middle panel
Up middle panel
Right panel
Back panel
Door panel
Drawer front panel
Drawer left panel
Drawer right panel
Drawer back panel
Drawer bottom panel
Main frame
Connection frame
②

1. Insert part I into frame P1.
1. Attach connection frame P2 to frame P1 with part O.
P1
P1
P2
P2
P1
P1
O
O
O
O

1. Separate parts E1 and E2 (runners) as shown below.
2. Attach part E1 to panels 7 and 9 with part D.
3. Insert parts A and G into panel 9.
D
D
D
D
E1
E1
E1
E1
D
A
G
A
G
A
G
1. Insert parts A and G into front and back of panel 4.

1. Insert parts A and G into the front and back of panel 8.
A
G
A
G
1. Attach panel 8 to panel 4 with parts A and G.
2. Attach panels 2 and 3 to panel 8 with parts A and G.
3. Attach panel 7 to panel 4 with parts A and G.
7
A
G
A
STEP 6:
STEP 5:

1. Attach panel 6 to panels 2 and 4 with parts A and G.
2. Attach panel 9 to panels 3 and 4 with parts A and G.
8
STEP 7:
STEP 8:
1. Insert parts A and G into panel 6.

1. Insert parts A and G into panels 1 and 5.
AGAG
9
STEP 9:
STEP10:
1. Slide panel 10 along slots of panels 6 and 9.

1. Attach panel 5 to panels 6, 7 and 9 with parts A and G.
2. Attach panel 1 to panels 6, 8 and 9 with parts A and G.
1. Attach frames P1 and P2 to panel 5 with part B.
10
P1
P2
STEP 11:
STEP 12:

1. Insert part H to panels 11 and 12 with part F.
2. Insert part A into panel 12.
1. Attach the right side of part M to panel 11 with part D.
2. Attach the left side of part M to panel 6 with part D.
A
A
A
A
11
X2
STEP 13:
STEP 14:

1. Attach panels 13 and 14 to panel 15 with part C.
2. Slide panel 16 along slots of panels 13 and 14.
1. Attach panel 12 to panels 13 and 14 with part A.
12
X2
X2
C
C
C
C
STEP 15:
STEP 16:

1. Attach part E2 to panels 13 and 14 with part D.
1. Insert part L into panel 10.
2. Insert part K into panel 10 with part J.
13
X2
STEP 17:
STEP 18:

1. Install drawers into the cabinet, ensure runners are correctly aligned.
Install Tip Kit
1. Attach part N to panel 1 with part D.
2. Attach part N to the wall with part P.
N
P
D
N
14
①
STEP 19:
STEP 20:

15
Assembly complete!
STEP 21:

16