JWA ORTIZ 71289 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
ORTIZ
ITEM CODE:71289/72190/71291
3 Pce Setting

Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the
product
2. Take care when lifting. Product should be assembled as near as possible to the point of
use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible risk to
injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
PRE-ASSEMBLY PREPARATION
Allow 30 min For 1 person
2

PARTS LIST
3

PARTS LIST
4

Step 1 You will need the following
•Prepare a floor or benchtop with a protective blanket
or cardboard.
•Attach lower part (5) to upper part (4), secure with
bolt (D), thread through washer (C). Fasten with Allen
Key (B).
•Repeat for all 4 connection points.
Part 1：Side Table
5

Step 2 You will need the following
•Turn over the table frame and place glass (3) on top
•Glass is secured on table with suckers.
6

Assembly is complete
7

Part 2: Chair You will need the following
•Attach lower part (2) to upper part (1), secure with bolt
(A), thread through washer (C). Fasten with Allen Key (B).
•Repeat for all 4 connection points.
Step 1:
8

Assembly is complete
9

10