Kaba SILCA SW- VAG GROUP-L0 User manual

SW- VAG®GROUP-L0 (SDD/SBB)
GB
Code: D431375XA - Vers. 2.0

INDEX
1VAG FUNCTIONS MENU (AUDI®- SEAT®- SKODA®- VOLKSVAGEN®)..................... 3
1.1 VAG GROUP........................................................................................ 3
1.2 PROGRAMMING NEW KEYS.............................................................. 5
1.3 NUMBER OF KEYS MEMORIZED....................................................... 8
1.4 READING IMMO ID.............................................................................. 9
1.5 ERRORS ............................................................................................ 10
1.6 ERASE ERRORS ............................................................................... 11
2

1 VAG FUNCTIONS MENU (AUDI®-SEAT®-SKODA®-VOLKSWAGEN®)
1.1 VAG GROUP
The functions on these vehicles are:
- Programme new keys (max. 8 keys in the memory);
- Reading of the number of keys memorized;
- Read IMMO ID;
- Read the errors present;
- Delete all errors.
To make use of this function, use:
Switch Adapter
CABLE OBDII [00] (STANDARD)
CABLE VAG [01] (OPTIONAL)
New key/s
All keys to be enabled (Max 8)
PIN CODE
Comprising 4 alphanumeric characters
On the label together with the
mechanical code
If applied for to the dealer, it will have 7
numbers and will have to use the
function : CONV. 7-4
SBB CABLE/ADAPTER
CABLE OBD II [00] (STANDARD)
CABLE VAG [01] (OPTIONAL)
3

WHERE TO FIND THE PLUG DIAGNOSTICS
C2 C3
C5 C7
C8 C9
C10 C14
4

SELECTING THE CAR MAKE
In this case SDD/SBB is able to automatically recognize the various central units connected and
therefore uses the right communication procedure. Simply identify:
- CAR MODEL
- YEAR OF MANUFACTURE
-
VOLKSWAGEN
-
>
BORA (98- )
CADDY (95-99)
CADDY (00- )
GOLF (95-99)
GOLF (00- )
GOLF CABRIO (95-99)

- Use the  arrow keys to select the make, then press ENTER.
- Press ESC to quit.
FUNCTIONS MENU
This section allows the functions to be carried out, in particular to:
- programme new keys in the immobilizer also when all the original keys are missing;
- erase the code for a missing key from the immobilizer memory;
- check how many keys are stored in the immobilizer memory;
- view the immobilizer ID (ID IMMO);
- erase any errors in the immobilizer memory.
ATTENTION: the programming system for the VAG®group is structured so that every time programming
takes place all the keys that will be used on the given car must be memorized again. It is
therefore not possible to add/erase a single key individually.
If the wrong PIN CODE is entered 3 times consecutively, the immobilizer unit will block.
To release it, leave the key in the ON position (from 30 minutes to 24 hours, according to
the vehicle).
The following is the structure of the VAG®function menu:
-
VOLKSWAGEN
-
>
PROG.NEW KEYS
MEM.KEYS NUMBER
IMMO ID READING
PRESENT ERRORS
ERRORS RESET

- Select and press ENTER.
1.2 PROGRAMMING NEW KEYS
This function can be used to add keys to the immobilizer or erase them.
- To activate the function select “ PROG. NEW KEYS ” and press ENTER.
The display will show:
-
PROG. NEW KEYS
-
If you don’t have
PIN CODE
you don’t codify
any key
The PIN CODE is required (secret number with 4 digits).
5

The PIN CODE is located on the black plastic tag provided with the car key on purchase.
The tag gives the mechanical code and the PIN CODE protected by a black plastic film
(scrape off with a coin).
If the PIN CODE is lost, apply to a VAG® dealer for another one.
- press ESC to quit;
- press ENTER to continue.
The display will show:
- DATES INSERTION -
PIN CODE : XXXX
Keys number : Y
PIN : XXXX
N. Keys : Y
- Enter the PIN CODE and press ENTER;
- Enter the Number of keys to be stored in the memory and press ENTER;
- Press ESC to quit;
- Press ENTER to continue.
The display will show:
CONNECTING ...
# # # # # # # # # #
- Wait a few seconds to communicate with the immobilizer.
If a wrong PIN has been entered or there are errors during communication, the display will
show: error message No. 1 (see Operating Manual chap. 10 – WARNING/ERROR
MESSAGES).
MEMORIZING KEYS
If communication has been successful, the display will show:
COMMUNICATION OK!
Sequentially insert
the keys and turn each
one to the ON position
Press any key ...
Memorization of the keys in the car will now begin.
- Insert all the keys to be memorized one after the other, turning each one to the ON
position.
If errors occur during programming, the immobilizer warning light (located on the
dashboard) will flash rapidly. Repeat the operation.
- Press a key to continue; the display will show:
6

If the warning light
on the console is
blinking repeat the
procedure because an
error with the keys
has occured
Press any key...
KEY TESTING
ATTENTION: to check that the memorized keys work, test by turning on the car engine. If there are
problems, repeat the operation.
- Press a key to continue.
ARCHIVING OPERATIONS - USER DATA
All the operations carried out can be stored in the machine memory.
The display will show:
Do you want to save
the customer data
NO
>YES

- Select YES/NO and press ENTER.
- No, to return to the IMMOBILIZER functions menu screen;
- Yes, to memorize the data relating to the operation completed;
- ESC to quit.
The display will show:
Do you want to save
PIN CODE?
NO
>YES

- Select YES/NO and press ENTER.
- No, the data are archived except for the PIN CODE.
- Yes, the user data are archived.
USER DATA ARCHIVE
This section is used to enter the user data to be saved for the operation completed;
The display will show:
-
USER DATA
-
>
POS.: 001
DATE: 19/07/01
SURNAME: XXXXXXXXXX
NAME: XXXXXXXXXX
REG.NO: XXXXXXXXXX

7

- SURNAME (required) (12 characters);
- NAME/NUMBER PLATE (optional) (12 characters).
The following data will be saved automatically:
- POS.: Position in which the data will be saved;
- DATA: Date of the operation;
- MAKE: Car make for which the keys has been memorized;
- MODEL: Car for which the keys has been memorized;
- YEAR: of the model;
- Keys mem.: Number of keys memorized;
- PIN CODE: (if memorization is confirmed by the operator);
- IMMO ID: Immobilizer identification.
To enter the data:
- use the keys  to position the cursor on the item required;
- press to enter and select the field in which to digit the text.
NOTE: to select the letter required, press the corresponding key N times.
The programming capacity of the archive is approx. around 100 users data.
Glossary:
Ô: Deletes characters to the left of the cursor
1 space - . 1
2 A B C 2 à Ä á â Ç
3 D E F 3 è È ë ê
4 G H I 4 ì î ï í
5 J K L 5
6 M N O 6 ò ö ô ó Ñ
7 P Q R S 7 ß
8 T U V 8 ù ü û ú
9 W X Y Z 9
0 0
- Press ENTER to confirm.
- To quit and memorize the data, press ESC.
- Select YES/NO and press ENTER.
Is the information
inserted correct?
NO
>YES

- No, to return to the data entry screen.
- Yes, to store the data in the archive.
1.3 NUMBER OF KEYS MEMORIZED
This function is used to view the number of keys memorized in the immobilizer.
After selection the display will show:
8

-
MEM.KEYS NUMBER
-
If you don’t have
PIN CODE you don’t
codify any key
The PIN CODE is required to use this function.
- press ESC to quit
- press ENTER to continue
The display will show:
- DATES INSERTION -
PIN CODE : XXXX
PIN : XXXX
- Enter the PIN CODE
- press ESC to quit;
- press ENTER to continue.
The display will show:
CONNECTING ...
# # # # # # # # # #
At the end of the operation the display will show:
Keys number in
memory:
Y
Press any key...
- Press a key to quit.
NOTE: this function can be used to start the car with an emergency start. Enter the PIN CODE
and read the number of keys, at the end of the operation the car can be started once, excluding
the immobilizer function (using a key without transponder or with disabled transponder).
If a wrong PIN has been entered or there are errors during communication, the display will
show: error message No. 1 (see Operating Manual chap. 10 – WARNING/ERROR
MESSAGES).
1.4 READING IMMO ID
This function is used to view the immobilizer identification (ID IMMO), a code comprising 14
alphanumerical characters, essential for finding the PIN CODE; In such cases the PIN CODE is
issued by the car manufacturer.
9

- Select and press ENTER, the display will show:
-
IMMO ID READING
-
XXXXXXXXX
IMMO XXXXXXX
XXXXXXX XX
Press ESC to quit
Only the next 14 characters make up the word IMMO relating to immobilizer identification.
- Press ESC to quit.
1.5 ERRORS
This function is used to check for any anomalies in the immobilizer memory.
After selection press ENTER, the display will show:
Please wait:
Present errors
NO ERRORS
If there are no anomalies in the memory, the display will show:
-
PRESENT ERRORS
-
NO ERROR
DETECTED
Press any key...
- Press any key.
ERRORS FOUND
If there are anomalies in the memory the display will show how many (XX) errors there are in
the centralized unit memory:
-
PRESE
N
T ERRORS
-
Detected
XX
errors
Press any key...
Press any key to view a description of the error:
10

E
RR.: XXXXXXXXXXX 1/XX
Description
of the error

- ERR: XXXXXXXXXXXX: error code.
- Press  to scroll all the errors found in the memory;
- Press ESC to quit.
1.6 ERASE ERRORS
After selection press ENTER the display will show:
-
ERRORS RESET
-
Erase
actual errors:
>NO
YES

- Select YES/NO and press ENTER.
- No, to return to the previous menu.
- Yes, to erase the errors in the memory.
- ESC to quit.
After a few seconds the display will show:
TERMINATED
ERASING
Press ESC to quit
- Press ESC to quit.
11

SILCA S.p.A.
Via Podgora, 20 (Z.I.)
31029 VITTORIO VENETO (TV)
Tel. [phone] Fax [phone]
www.silca.it
In the United Kingdom
SILCA Ltd.
Kimpton Road - Sutton
SURREY SM3 9QP
Tel. [phone]
Fax [phone]
E-mail: [email protected]
In Germany
SILCA GmbH
Siemensstrasse, 33
42551 VELBERT
Tel. [phone]
Fax [phone]
E-mail: [email protected]
In France
SILCA S.A.
78440 PORCHEVILLE
Tel. [phone]
Fax [phone]
E-mail: [email protected]
In Spain
SILCA KEY SYSTEMS S.A.
C/Santander 73A
BARCELONA - SPAIN
Tel. [phone]
Fax [phone]
E-mail: [email protected]
Members of the Kaba Group