Kaytee EZ Clean 30"x18" Ultimate Habitat User manual

Carefully Unpack and Sort All Components on the Parts List
Important:
SAVE YOUR INSTRUCTIONS FOR FUTURE REFERENCE
If your new pet home has experienced damage during shipping,
please do not return your cage to the store.
Our Customer Service Department is available to help with any problems.
Our Toll-Free Number (within the USA and Canada only) is 1-800-255-4527,
Monday - Friday from 8:00 a.m. to 4:00 p.m. (Central Standard Time).
UPCMATERIAL NO.DESCRIPTION
EZ Clean 30" x18" Ultimate Habitat 045125502244
100525194
Distributed by: KAYTEE Products, Inc., Chilton,WI 53014 USA
©2016 KAYTEE Products, Inc. Made in U.S.A. of U.S. and Imported Parts
Kaytee and Kaytee with design are registered trademarks of Kaytee Products, Inc.
For more information on bird and small animal products,
visit us at: kaytee.com
PP1004016
EZ Clean 30” x 18”
Ultimate Habitat
Assembly Instructions
The EZ Clean Pull Out Tray (B)allows dirty bedding and debris to be swept directly into the garbage
without having to take apart the cage.
Place cage on a garbage can. Turn knob and slide out EZ Clean Pull Out Tray (B). Sweep dirty
bedding and debris into the garbage. Wash the EZ Clean Plastic Base (A)with soap and water or
spray with Kaytee®Clean Cage (Item #100079553) (sold separately), and wipe dry. Kaytee® Clean
Cage neutralizes odors, safely cleans surfaces and is non-toxic to all pets.
Cleaning Your Habitat
BA
Place the Food Dish (J) inside the habitat away from the water bottle to ensure the food does
not become soiled from your pet drinking nearby.
STEP 10
J
Fill and attach the Water Bottle (I)to the outside of the habitat and secure with provided
wire holder located inside the Water Bottle (I). Be sure the Water Bottle (I)is located low
enough so your pet will be able to reach the sipper.
STEP 9
I
Attach the Hay Buffet (H) on the opposite side of the cage from the Front Access Door with Lock
(D)on the back wire panel. Position clips on the back of the Hay Buffet (H) on the third wire bar up
and be sure to snap the clips into place.
STEP 8
H
Position the Comfort Shelf (F) on the fourth bar up from the bottom. Attach the Wavy Ramp
(G) to the Comfort Shelf (F) by clipping the tabs on the Wavy Ramp (G) to the edge of the
Comfort Shelf (F).
STEP 7
G
F
F
Attach the black knob to the outside of the EZ Clean Pull Out Tray (B) by securing the tongue/lock on
the opposite side with the square opening, then insert the screw and secure using a phillips
screwdriver (not included). Slide the EZ Clean Pull Out Tray (B) into the Plastic Base (A).
STEP 11
A
B
B
Knob
Screw
Tongue
or Lock

STEP 6
Line up the loops at the bottom of the Cage Wire Set (C) to the holes provided on the
Plastic Base (A).
STEP 5
Place the Cage Wire Set (C)and the EZ Clean Plastic Base (A)in an upright position. Place the
Cage Wire Set (C)on top of the EZ Clean Plastic Base (A), then with the doorway facing
forward, lock the wire between the EZ Clean Plastic Base (A)attachment tabs.
C
A
Now, turn the EZ Clean Plastic Base (A)upside down and insert the set of 4 Caster Wheels (E) into
the preformed holes.
STEP 4
A
E
Lock the right and left side panels onto the back panel. Snap the wire hook through the wire loop.
Next, lock the front panel onto the side panels. Attach wire door (D) onto the front panel.
STEP 3
C
Carefully unfold the front, back and side panels.
STEP 2
C
Unwrap the Cage Wire Set (C) and lay on a flat surface with the doorway facing upward.
STEP 1
C
Examine each part and identify each component
using parts identication list
Habitat Measures:
30" L x 18" W x 19.5" H
QTY. KEY DESCRIPTION
1 AEZ Clean Plastic Base
1 BEZ Clean Pull Out Tray
1 CCage Wire Set
1 DFront Access Door with Lock
4 ECaster Wheels
1 FComfort Shelf
1 GWavy Ramp
1 HHay Buffet
1 IWater Bottle
1 JFood Dish
A
B
C
D
E
FGH
I
J