Kaytee My First Home Ferret User manual

Carefully Unpack and Sort All Components on the Parts List
Important:
SAVE YOUR INSTRUCTIONS FOR FUTURE REFERENCE
If your new pet home has experienced damage during shipping,
please do not return your cage to the store.
Our Customer Service Department is available to help with any problems.
Our Toll-Free Number (within the USA and Canada only) is 800 -255-4527,
Monday - Friday from 8:00 a.m. to 4:00 p.m. (Central Standard Time).
UPCMATERIAL NO.DESCRIPTION
MFH Ferret 24" x 24" Habitat 045125502480
100509411
Manufactured by: KAYTEE Products, Inc., Chilton, WI 53014 USA
©2016 KAYTEE Products, Inc.
Made in the USA of US and Imported Parts
Kaytee and Kaytee with design are registered trademarks of Kaytee Products, Inc.
For more information on bird and small animal products,
visit us at: kaytee.com PP1004216
24” x 24”
My First Home Ferret
Assembly Instructions
Attach the Safety Ramps (E) to the edges of the 2 top comfort shelves and the bottom shelf. Then
assemble and attach the slide (H, I, J & K) to the Comfort Shelf with Hole (G).
STEP 8
H
I
J
K
Position the Comfort Shelf with Hole (G) on the 16th wire up from the bottom.
Position the solid Comfort Shelves (F) on the 5th wire up from the bottom, 7th from the top and
the 15th from the top.
STEP 7
Pinch Bunny Ear latches on each side of the Cage Wire Set (A)and lift the entire Cage Wire Set off
the Plastic Base (C). Set the assembly on a flat surface while you empty the Plastic Base (C). Empty
and wash the Plastic Base (C)with soap and water or spray with Kaytee®Clean Cage (Item
#100079553) (sold separately), and wipe dry. Kaytee® Clean Cage neutralizes odors, safely cleans
surfaces and is non-toxic to all pets.
Cleaning Your Habitat
Special Note:
Door Lock: Be sure to unlock and press the latch down prior to
pulling.

STEP 5
Place the Cage Wire Set (A)and the Plastic Base (C)in an upright position. Place the Cage
Wire Set (A)on top of the Plastic Base (C), then with the sticker and the doorway facing
forward, lock the wire between the Plastic Base (C)attachment tabs.
Examine each part and identify each component
using parts identication list
Habitat Measures:
24" L x 24" W x 44.2" H
Unwrap the Cage Wire Set (A) and lay on a flat surface with the doorway facing upward.
STEP 1
Carefully unfold the front, back and side panels.
STEP 2
Lock the right and left side panels onto the back panel. Snap the wire hook through the wire loop.
Next, lock the front panel onto the side panels. Attach both Cage Wire Doors (B) onto the front
panel.
STEP 3
STEP 6
Line up the loops at the bottom of the Cage Wire Set (A) to the holes provided on the Plastic Base (C).
Now, turn the Plastic Base (C)upside down and insert the set of 4 Caster Wheels (D) into the
predrilled holes.
STEP 4
QTY. KEY DESCRIPTION
1 ACage Wire Set
2 BCage Wire Door
1 CPlastic Base
4 DCaster Wheels
3 ESafety Ramp
3 FComfort Shelf
1 GComfort Shelf with Hole
2 HSlide Top
1 ISlide Connector
2 JSlide Curve
1 KSlide Bottom
H
I
J
K