KBL megaSun K9S User manual

OPERATING INSTRUCTIONS
PART 1/2
PRODUCT LINE

Copyright and trade marks
© Copyright 2023 KBL GmbH
This documentation only refers to KBL GmbH products. It may not be reproduced, photocopied, translated or
stored without particular authorisation from KBL GmbH. Reproduction on electronic media or in machine-readable
form, either in part or in whole, is also prohibited.
Any information in this document reects the current status at the time of publication. However, illustrations and
information in this document are provided without guarantee, subject to possible changes and to the exclusion
of any liability. This document does not contain any independent promises of guarantee. Our general terms and
conditions of sale and delivery apply with regard to liability / warranty.
is a registered trademark of KBL GmbH.
LICENCE INFORMATION AND SOURCE CODE
This product contains software components that are licensed by the copyright holders as open source software
(free software) under the GNU General Public License, version 2.
You may obtain the source code of those software components from us on a data carrier (DVD) by submitting a
request to our customer service within three years after distribution of the product by KBL. For providing the data
carrier and for shipping, we take the liberty of charging you the amount of 15 Euros.
EXPORT
The technical equipment and version of the devices is carried out in accordance with the legal provisions of the
respective country of operation. The devices listed in these operating instructions may neither be exported to
Canada or the USA nor be operated there. In such a case, KBL GmbH shall assume no manufacturer’s liability. It
is expressly pointed out that high liability risks may arise for the exporter and/or operator in the event of infringe-
ments.
Current instructions can be found on https://media.kbl.de
TRANSLATION OF THE ORIGINAL
OPERATING INSTRUCTIONS
Version: BA1-K9-en
Status: 11/2023
Item number: 0100036802 A
KBL GmbH
Ringstraße 24-26 · 56307 Dernbach · Germany
Phone [phone] · Fax [phone]
eMail [email protected]
www.megaSun.de

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE
4
Content
General ................................................................... 5
About these instructions .......................................... 5
Safety sign............................................................... 5
Signal words............................................................ 5
Denitions................................................................ 6
Transport ................................................................. 6
Disposal of old equipment ....................................... 7
Ambient conditions .................................................. 7
Interruption of the booting process.......................... 8
Service..................................................................... 8
Safety instructions ................................................ 9
Intended use............................................................ 9
Foreseeable misuse ................................................ 9
Obligations of the studio operator.......................... 10
General safety instructions.................................... 10
Training of the operating personnel....................... 11
Measure to maintain operational safety................. 11
Updating the system software ............................... 11
Timer ..................................................................... 11
Tanning times ........................................................ 11
Stop button ............................................................ 11
Device description............................................... 12
Standards and directives....................................... 12
Assemblies ............................................................ 12
Device connections - audio................................ 13
Level adjustment - studio signal ............................ 13
Using di󰀨erent music sources ............................... 14
Bluetooth® connection............................................ 14
Wireless charging.................................................. 15
Commissioning.................................................... 16
Operating modes................................................... 16
Tanning instructions ........................................... 17
Notes for the user.................................................. 17
Tanning times ........................................................ 18
Tanning mode ...................................................... 20
Preselection on the external control panel ............ 20
Starting tanning ..................................................... 24
Stopping tanning.................................................... 24
Operation during tanning....................................... 24
Control panels & functions..................................... 25
Standby mode...................................................... 29
Service mode......................................................... 29
beautyBooster in standby mode............................ 29
Setting the decorative lighting ............................... 29
Standby functions.................................................. 29
Video function........................................................ 32
Maintenance and cleaning.................................. 33
Cleaning and disinfection ...................................... 34
Carrying out maintenance work............................. 36
Maintenance intervals............................................ 36
Maintenance by operating personnel .................... 38
Tools and aids........................................................ 38
Unlocking the bench.............................................. 38
Acrylic panes ......................................................... 39
Fluorescent tubes.................................................. 40
LED light sources .................................................. 40
Filter cartridges...................................................... 41
Aroma and Aqua Cool ........................................... 42
System messages ............................................... 44
Technical data...................................................... 46
Dimensions & minimum distances......................... 48
Tube arrangements ............................................... 49

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE 5
General
About these instructions
These instructions are intended for
• the studio operator,
• the operating personnel,
• the users,
• trained and authorised specialist personnel,
Every person handling this tanning device must have
read and understood the contents of these operat-
ing instructions. These instructions describe tanning
devices with the maximum equipment of functions.
Always keep these instructions to hand.
Safety sign
This symbol indicates that there are
basic risks to the health of persons.
This symbol indicates that there is a risk
to the health of persons due to UV radi-
ation.
This symbol indicates that there is a risk
to the health of persons due to electrical
voltage.
This symbol indicates that there is a risk
to the health of persons due to burns.
If the tanning device is operated before
opening, lamps and housing parts are
hot.
This symbol indicates that there is a risk
to the health of persons due to trapping.
When assembling heavy parts of the
device, you may trap your ngers or
hands.
This symbol indicates that there is a risk
to the health of persons due to falling
loads.
This symbol indicates that damages to
the tanning device, the material or the
environment can occur.
IMPORTANT INFORMATION
This symbol is no safety sign but gives
information for a better understanding.
Signal words
DANGER
• Death / severe injury is imminent.
WARNING
• Death / severe injury possible.
CAUTION
• Moderate / minor injury possible.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE
6
Denitions
STUDIO OPERATOR
Person who provides tanning devices to users on a
commercial basis. The studio operator is competent
/ skilled to operate and maintain the tanning device.
He is responsible for the proper operation of the tan-
ning device and for compliance with the maintenance
intervals.
USER
Person who uses the tanning device.
OPERATING PERSONNEL
Persons who are responsible for the operation, clean-
ing and disinfection of the tanning device as well as
for general maintenance work and instruction of the
user.
TRAINED AND AUTHORISED SPECIALIST
PERSONNEL
Qualied and safety-instructed specialist personnel
of the manufacturer or of an external company who
have been trained and authorised by the manufac-
turer for assembly and maintenance work on KBL
tanning devices.
Transport
WARNING
Falling loads
Crushing hazard due to heavy equip-
ment parts.
• Keep a safe distance from the trans-
port machine.
• Do not step under the load.
• Wear safety shoes.
TRANSPORT WITH THE FORKLIFT
The tanning device can be damaged if
the forklift forks used are too short.
• Only use su󰀩ciently long forklift forks.
The tanning device is mounted on a pallet.
• Carefully drive the forklift into the openings of the
pallet.
• Lift the load a few centimetres.
• Carefully move the load to the installation site.
OTHER TYPES OF TRANSPORT
If transport by forklift is not possible, the tanning
device must be unpacked and partially disassembled.
Then transport the components to the installation site,
e.g. with a trolley. The components must be lifted by
several people, depending on their weight and size.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE 7
Disposal of old equipment
This tanning device consists of
components which must never be
disposed of with household waste!
Make a valuable contribution to environmental pro-
tection and dispose of your old equipment in an envi-
ronmentally friendly manner at the end of its service
life. You can hand in the old equipment without uo-
rescent lamps, as electronic waste at public collection
points or at private disposal companies.
The disposal is usually free of charge, but there may
be a charge for the collection. Fluorescent lamps are
to be handed in at the responsible collection points
for hazardous substances!
Metals and plastics can also be returned separately
to the raw materials cycle. Electrical and electronic
components must be disposed of as electronic waste!
Information on environmentally compatible disposal
can be obtained from your local authorities or the
municipal administrations.
CAUTION
Components containing mercury
There is a risk of mercury poisoning due
a broken lamp.
• Ventilate the room/environment, at
least 15 minutes before disposing of
the broken lamps.
Ambient conditions
Operation only in dry rooms with su󰀩cient aeration
and ventilation.
Do not operate the tanning device in
aggressive ambient conditions (e.g. in
air containing chlorine or salt).
RISK OF OVERHEATING DUE TO
OBSTRUCTION OF THE AIR FLOW
The supply and return air areas at the tanning device
may not be modied, built over or blocked. Do not
make unauthorised changes to the tanning device.
The manufacturer is not responsible for damages and
injuries resulting from such actions.
• Pay attention to aerodynamic data and keep the
minimum distances to the ceiling, oor and walls.
See chapter ->
Technical data .
Insu󰀩cient air supply leads to over-
heating, which can damage the tanning
device!

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE
8
OPERATION IN MOBILE FACILITIES
Mobile facilities include among others water and rail
vehicles. Additional safety measures are required for
operation on/in any type of carrier vehicle!
WARNING
Risk of injury due to sudden move-
ments.
In the event of sudden movements of
the carrier vehicle, the tanning device
can slip or tip over and cause serious
injuries.
• The tanning device must be secured
against slipping and tipping over.
• No tanning may take place if acceler-
ation forces or movements occur.
• Operation only in compliance with
all legal regulations that apply to the
operation of tanning devices on/in
mobile facilities.
TEMPERATURE DIFFERENCES
Risk of damage when switching on
the mains voltage
If there are large temperature di󰀨er-
ences between the tanning device and
the environment, the tanning device
must not be put into operation.
• Wait at least 2 hours so that the tem-
perature can equalise.
Interruption of the booting
process
If the boot process (start attempt) is
interrupted several times, the software
version is automatically reset to the pre-
vious version.
• Returning to the latest version is only
possible by a manual update.
Service
If you have any questions regarding service, please
contact your local specialist dealer.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE 9
Safety instructions
In this chapter you will nd general information on
the subject of safety and the handling of this tanning
device. Specic safety instructions can be found in
the individual chapters of the operating instructions.
Intended use
This tanning device is used to tan one person at a
time where there are no factors that prohibit tanning.
The following persons are not allowed to use the tan-
ning device:
• Persons under the age of 18.
• Persons who su󰀨er or have su󰀨ered from skin can-
cer or are predisposed to it, or those whose rst-de-
gree relatives su󰀨er or have su󰀨ered from malig-
nant melanoma (black skin cancer).
• Persons who are taking light-sensitising medica-
tion.
• Persons undergoing medical treatment for condi-
tions associated with photosensitivity.
• Persons with acute sunburn.
• Persons who tend to develop freckles.
• Persons with atypically discoloured areas of skin.
• Persons with more than ve asymmetrical moles
with altered pigmentation and uneven edges,
whose diameter is 5 millimetres or more. In case of
doubt, consult a doctor!
• Persons with more than 16 moles with a diameter
greater than or equal to 2 millimetres.
• Persons who have had several severe sunburns in
their childhood.
• Persons with natural red hair colour.
• Persons who do not tan at all or cannot tan without
getting sunburn.
• Persons who are predisposed to getting sunburn.
Tanning must be done while lying down. The posi-
tion must be chosen so that the control panel can be
reached at all times during tanning.
Be aware that very vulnerable persons may have
needs beyond the scope described here.
Foreseeable misuse
• No other persons may stay within the radiation area
of the tanning device during its operation.
• Children must be supervised in order to make sure
that they do not play with the tanning device.
•
Radiation of animals, reptiles in particular.
• Each use deviating from the requirements in chap-
ter Intended use , is a misuse.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE
10
Obligations of the studio
operator
The studio operator is responsible
• for informing users about possible risks of tanning.
• for ensuring that all danger and safety instructions
attached to the tanning device are legible, observed
and not removed.
• for ensuring that no safety equipment (e.g. thermal
switches) is removed, deactivated or otherwise
avoided.
• for ensuring that operating, cleaning and mainte-
nance instructions are available.
• for ensuring the proper handling (use, operation
and maintenance) of the tanning device by training
and instructing the operating personnel.
Operating instructions must enable the
safe operation of the tanning device, tak-
ing into account the national environmen-
tal and occupational health and safety
regulations. Furthermore, they must take
into account special characteristics of the
studio operation and any insights gained
from it.
• In the EU, the EU Directive 89/391/EEC
applies.
• In Germany, the Industrial Safety Regu-
lation (BetrSichV) applies.
The manufacturer accepts no liability for damage or
injury resulting from improper handling or non-obser-
vance of these operating instructions.
Only use spare parts approved by KBL!
Replace tubes and high-pressure lamps only with
those marked on the tanning device, otherwise the
operating permit and warranty will expire!
General safety instructions
• This tanning device has been designed for use in a
commercial environment only.
• Observe all instructions in this manual. In addition,
observe all valid legal and other applicable rules
and regulations - including those of the country of
operation.
• The tanning device may only be set up and installed
by trained and authorised specialist personnel.
• Do not make any unauthorised changes or modi-
cations to the tanning device.
• Observe all danger and safety instructions attached
to the tanning device!
• Do not under any circumstances remove the safety
devices and safety instructions or ignore them!
• Only operate the tanning device when it is in
perfect condition.
• Never operate the tanning device with the external
cladding or acrylic panes removed!
• It is essential to observe the maintenance cycles
specied in the maintenance plan.
• For sunbeds, observe the load limit of the bench
pane.
•
The bench may only be opened with the bench pane in
place.
• The load capacity of the device canopy
is not designed for additional loads.
• Do not lean on or over the canopy of
the device.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE 11
Training of the operating
personnel
The studio operator is obliged to train his operating
personnel and to instruct them in the applicable laws
and accident prevention regulations. He must ensure
that his operating personnel has understood and fol-
lows these instructions:
This includes:
• Operating instructions.
• Safety instructions.
• Information on intended use and foreseeable mis-
use.
• Cleaning / disinfection and maintenance instruc-
tions
• Your instructions and the manufacturer’s informa-
tion must be available to the operating personnel at
the workplace. Regularly check the safety aware-
ness of your operating personnel and their under-
standing of risks, taking into account the operating
instructions of this tanning device.
• Ensure that cleaning and disinfection intervals are
observed, especially cleaning and disinfection of
the tanning device after each use.
• Ensure that your operating personnel provides
appropriate advice to users regarding tanning
times, possible risks and the operation of the tan-
ning device.
Measure to maintain operational
safety
To maintain operational safety, the tanning device
must be subjected to periodic inspections by KBL
customer service or an approved specialist company
every 12 months from the time of commissioning.
Inspection and maintenance work must be entered in
the inspection and operating logbook of the tanning
device! (KBL item number: 1100117110)
Updating the system software
Danger of hardware defects due to loss
of voltage.
Electronic components can be damaged
by loss of voltage during the update.
• Ensure that the tanning device is not
disconnected from the mains voltage
during the update process.
• To carry out the update, use the software o󰀨ered by
KBL for download. (https://media.kbl.de)
• For detailed information on the procedure, please
refer to the documentation enclosed with the soft-
ware.
Timer
This tanning device must be operated via an external
timer that meets the requirements of EN 60335-2-27,
cl. 22.105.
Tanning times
The tanning times specied in these instructions must
be observed!
Stop button
A stop button is located at the head end of the tanning
device, with which the current tanning process can be
interrupted.
To continue tanning
-> Press the START button on the con-
trol panel.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE
12
Device description
Standards and directives
The standards and directives applicable for the tan-
ning device can be found in the CE declaration of
conformity -> (https://media.kbl.de).
Assemblies
Canopy with tubes, facial tanners, internal and
external control panel.
Side with tubes and facial tanner.
Bench with tubes. Shoulder tanner, fan and electron-
ics.
The exact tube equipment of the individual device
types can be found in the operating instructions part
2/2 of the device catalogue .
1Aqua Cool nozzles
2External control panel
3Internal control panel
4Facial tanner
5Shoulder tanner
6Storage space for contactless charging of
smartphones.
7Front panel bench
8Opening mechanism of the bench
9Bench pane
10 Lateral pane
11 beautyBooster
12 Canopy pane
13 Air nozzles
14 Canopy
Example: MS K9S hybridSun
⑪
⑫
⑬
⑨
⑩⑧
④
⑤
⑥
⑦
②
①
⑭
③

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE 13
Device connections - audio
You will nd information on other device
connections in your installation instruc-
tions in the chapter “ Connection & Com-
missioning ”.
Level adjustment - studio signal
The components of the voice / audio system are
installed in the canopy. For level adjustment, the sec-
ond lter cartridge from the left must be removed.
REMOVE THE FILTER CARTRIDGE.
Ⓐ
ⒶRemove the lter cartridge.
Installation instructions for lter cartridges:
-> Seal always to the outside!
There is a rotary control for level adjustment on the
level adjustment board. Select the level setting so
that overmodulation is prevented. This depends on
the strength of the external signal and should be done
by a service technician.
Further adjustments can be made in the
service menu.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE
14
Using di󰀨erent music sources
The music source can be selected and changed at
any time on both control panels. The tanning device
can be operated with the following music sources:
INTERNAL MP3 PLAYER
To operate the internal MP3 player, use the original
music tracks stored on the SD card.
EXTERNAL MUSIC SOURCES
Tanning devices with standard line level up to low
speaker levels can be connected. These include:
• Studio music.
• External Bluetooth players (smartphones, etc.).
EXTERNAL 100 V MUSIC SIGNAL (OPTION)
For connection to a 100 V audio system, a trans-
former (KBL no.: 9100 0170 00) is required.
The connection must be carried out by trained service
personnel!
Bluetooth® connection
In order to connect external Bluetooth players (smart-
phones, etc.) wirelessly to the tanning device, a Blue-
tooth interface is optionally available.
CONNECTING AN EXTERNAL PLAYER
A Bluetooth connection can be established in standby
and tanning mode.
Make sure that you are in the reception
zone (approx. 2 metres).
Make sure that your player is congured
to search for other Bluetooth devices. If
this is not the case, activate Bluetooth
manually. Please read the operating
instructions of your player.
• Depending on your settings, the searching is per-
formed automatically or manually. All available
Bluetooth compatible tanning devices within range
are listed after a short time.
• Select the desired tanning device from the available
ones. The Bluetooth device names for your tanning
devices can be freely assigned in the service menu.
• If necessary, conrm the displayed code and con-
nect again. Not every smartphone asks for a code.
megaSun 01
megaSun 01
• A double beep signals that your player is connected
to the tanning device.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE 15
megaSun 01
megaSun 01
• Set a medium volume on your player and start play-
ing music.
• Adjust the desired volume on your player.
• During tanning, the volume can be adjusted via the
control panels of the tanning device.
DISCONNECTING AN EXTERNAL PLAYER
An existing connection is automatically disconnected
after tanning is completed.
If no tanning is started within 6 minutes after the
connection has been established, the contact is also
automatically interrupted.
BLUETOOTH DEVICE COMPATIBILITY
KBL GmbH attaches the greatest possible importance
to hardware compatibility! Due to the large number
of manufacturers of Bluetooth devices, compatibility
cannot be 100% guaranteed. In rare cases, it may not
be possible to establish a connection.
TROUBLESHOOTING
Each Bluetooth device o󰀨ers a list of paired devices.
Delete the older entries in this list whose prole over-
laps with the one with which you want to pair your
player (e.g. identical names). Then restart the device
recognition.
The Bluetooth function must be activated
in the service menu.
Wireless charging
A charging station for wireless charging is located on
the right-hand base of the device.
Devices suitable for wireless charging can simply be
placed here and charged.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE
16
Commissioning
Initial commissioning is carried out by the manu-
facturer or by trained and authorised specialist per-
sonnel. The tanning device is handed over ready for
operation.
As the studio operator, you are responsible for
observing the electrical regulations applicable at the
installation site.
If the tanning device has not been used for a longer
period of time, it must be inspected by trained and
authorised specialist personnel before being put into
operation again.
BEFORE INITIAL SWITCHING ON
• Attach the supplied warning sign or a sign with the
following wording permanently to the wall near the
tanning device.
Warning
UV radiation can cause eye and skin damage as
well as skin ageing and possibly skin cancer. Ask
the operating personnel for more information.
Wear protective goggles.
Certain medications or cosmetics may increase
sensitivity to UV radiation. If in doubt, consult a
doctor.
• Set the default settings in the service menu.
• Ensure the correct installation position of the uo-
rescent tubes. The tube marking must be visible,
otherwise no tanning e󰀨ect can be achieved.
• Store these instructions so that they are always at
hand.
Operating modes
STANDBY MODE
The tanning device is in standby mode; this means it
is connected to the mains but is not being used. The
tubes and radiators are switched o󰀨. From standby
mode, the device switches to tanning mode and ser-
vice mode.
TANNING MODE
The tubes and radiators are switched on and tanning
is taking place. During tanning mode, the settings for
the current tanning can be changed via the control
panel.
SERVICE MODE
In service mode, the tanning device is congured for
tanning mode, various values can be queried, set-
tings can be made and test functions can be carried
out.
FAN RUN-ON
After tanning, the fan remains in operation for 3 min-
utes to cool down the tanning device. As the tubes
cool down, the fan power is automatically reduced.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE 17
Tanning instructions
As a rule, normally tanning skin will have achieved an
even tan after three to ve tanning sessions. These
tanning sessions should be done every other day. To
maintain the tan once it has been achieved, one to
two tanning sessions per week are usually su󰀩cient.
Notes for the user
Observe the following notes on tanning.
GENERAL
• Only persons as described in the chapter “Intended
use” may use the tanning device.
• Never exceed your personal minimum erythema
dose (MED). Adhere to the information in the tan-
ning tables and the tanning times specied therein.
• If reddening of the skin (erythema) occurs approx.
16-24 hours after tanning, suspend further tanning
for the time being. After one week, tanning can be
resumed at the beginning of the tanning table.
• If unexpected e󰀨ects (e.g. itching) occur within 48
hours after the rst tanning session, consult a doc-
tor before further tanning sessions.
• Once a nal tan has been achieved, further tanning
can only be achieved by greatly exceeding the per-
missible tanning times. This should be avoided at
all costs.
• UV radiation from the sun or from UV devices can
cause irreversible skin or eye damage. The biologi-
cal e󰀨ect depends on the quality and quantity of the
radiation as well as the individual’s skin sensitivity.
• In cases of severe individual sensitivity or allergic
reactions to UV radiation, a doctor should be con-
sulted before tanning begins.
• The skin may show sunburn after excessive radia-
tion. Excessive repeated UV radiation with sunlight
or UV devices can lead to premature ageing of the
skin and an increased risk of skin cancer.
• The unprotected eye can become inamed on the
surface and in certain cases, e.g. after cataract sur-
gery, excessive radiation can damage the retina.
Cataracts can form after many repeated radiations.
• Consult a doctor if persistent swellings or sores
form on the skin or pigmented moles change.
• Certain medical conditions or side e󰀨ects of medi-
cations may be aggravated by ultraviolet radiation.
FOR EVERY TANNING SESSION
• Always wear the protective goggles provided. Con-
tact lenses or sunglasses are not a substitute for
the goggles!
• Remove cosmetics before radiation and do not use
any sunscreen or products that accelerate tanning.
The skin should be thoroughly cleansed and dry for
tanning.
• Allow at least 48 hours between tanning sessions.
• After tanning, do not sunbathe outside on the same
day.
• Protect sensitive skin areas such as scars, tattoos
and genitals from radiation.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE
18
Tanning times
Please refer to the tables below for the tanning times that apply to you. If there is no tanning for four weeks, you
must start again with the rst tanning session. The time interval between two tanning sessions must be at least 48
hours. The times given in the tables only apply to tanning devices that are maintained according to the intervals
listed in chapter “ Maintenance and cleaning ” (for tube equipment, see operating instructions part 2/2 of the device
catalogue ).
Tanning schedule - EU - UV type III
(According to UV type III pursuant to EN 60335-2-27-2021)
K9S
All types of devices
Skin types
I*II III IV V VI
1. Tanning - 6 min 6 min 6 min 6 min 6 min
2. Tanning - 7 min 7 min 8 min 10 min 11 min
3. Tanning - 7 min 9 min 10 min 14 min 17 min
4. Tanning - 8 min 10 min 12 min 19 min 22 min
5. Tanning - 9 min 12 min 14 min 23 min 25 min
6. Tanning - 10 min 13 min 16 min 25 min 25 min
7. Tanning - 11 min 15 min 19 min 25 min 25 min
8. Tanning - 12 min 16 min 21 min 25 min 25 min
9. Tanning - 13 min 18 min 23 min 25 min 25 min
10. Tanning - 14 min 19 min 25 min 25 min 25 min
Max. number of tanning minutes per year - (25kJ/m² NMSC weighted)
extraSun UP & TP 966 minutes UP = Ultra Power
hybridSun UP & TP 1036 minutes TP = Twin Power
smartSun UP & TP 1134 minutes SP = Super Power
vitaSun UP & TP 1050 minutes * Persons with skin type I should not be using the device.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE 19
Tanning schedule - EU - UV type II
(According to UV type II pursuant to EN 60335-2-27-2021)
K9S
All types of devices
Skin types
I*II III IV V VI
1. Tanning - 6 min 6 min 6 min 6 min 6 min
2. Tanning - 7 min 7 min 8 min 10 min 11 min
3. Tanning - 7 min 9 min 10 min 14 min 17 min
4. Tanning - 8 min 10 min 12 min 19 min 22 min
5. Tanning - 9 min 12 min 14 min 23 min 25 min
6. Tanning - 10 min 13 min 16 min 25 min 25 min
7. Tanning - 11 min 15 min 19 min 25 min 25 min
8. Tanning - 12 min 16 min 21 min 25 min 25 min
9. Tanning - 13 min 18 min 23 min 25 min 25 min
10. Tanning - 14 min 19 min 25 min 25 min 25 min
Max. number of tanning minutes per year - (25kJ/m² NMSC weighted)
extraSun UP & TP 952 minutes
hybridSun UP & TP 966 minutes UP = Ultra Power
smartSun UP & TP 1092 minutes TP = Twin Power
SP = Super Power
vitaSun UP & TP 938 minutes * Persons with skin type I should not be using the device.

Operating instructions | 1/2 | megaSun K9S PRODUCT LINE
20
Tanning mode
WARNING
Overdosed UV radiation
If tanning for an uncontrolled length of
time, severe skin and eye damage will
occur.
• Never operate the tanning device with
a defective timer.
• Adhere to the times specied in the
tanning schedule.
• The minimum recommended distance
to the shoulder tanners is 267 mm.
The functions explained below refer to
tanning devices with the maximum equip-
ment.
Preselection on the external
control panel
Before starting tanning, you can make a preselection
of certain tanning properties on the external control
panel.
Adapt these to your preferences and enjoy tanning
right from the start.
Depending on the equipment, di󰀨erent functions are
available here with the help of which you can make a
preselection.
Your choice remains valid for 3 minutes!
If you do not start tanning within this time, the selec-
tion jumps back to the default settings selected in the
service menu.
IntenseMediumSensitive
Sun
Sun
Audio
Voice
Aircon
Air
Aqua Cool
Aroma