KELLO-BILT 225TSW User manual

MODEL 225TSW
Flexible Double Wing Disc
Owner’s Manual
Models – 4626 / 5026
5426 / 5826
4628 / 5028
5428 / 5828
16-37337 urnt Lake Trail ▪Red Deer County, Alberta ▪Canada T4S 2K5
Ph: 403/347-9500 ▪ Toll Free: 877/613-9500 ▪ www.kello-bilt.com

Introduction
READ THIS MANUAL carefully to learn how to operate and service your achine correctly. Failure
to do so could result in personal injury or equip ent da age. This anual and safety signs on
your achine ay be ordered fro your Kello-Bilt dealer.
THIS MANUAL SHOULD BE CONSIDERED a per anent part of your achine and should re ain
with the achine when you sell it.
MEASUREMENTS in this anual are given in custo ary U.S. units. Only use the correct
replace ent parts and fasteners.
RIGHT-HAND AND LEFT-HAND sides are deter ined by facing in the direction the i ple ent will
travel when going forward.
WRITE DOWN PRODUCT IDENTIFICATION NUMBERS. Accurately record all the nu bers to
help in tracing the achine should it be stolen. Your Kello-Bilt dealer also needs these nu bers
when you order parts. File the identification nu bers in a secure place away fro the achine.
The Kello-Bilt Warranty provides you the assurance that Kello-Bilt will back its products where
defects appear within the warranty period. In so e circu stances, Kello-Bilt also provides field
i prove ents, often without charge to the custo er, even if the product is out of warranty. Should
the equip ent be abused or odified to change its perfor ance beyond the original factory
specifications, or if the equip ent is used for a purpose other than that which it was designed for,
the warranty will beco e void and field i prove ents ay be denied.
THE TIRE MANUFACTURERS warranty is separate and apart fro the equip ent warranty and
ay not apply outside the U.S. and Canada.
1

Contents
Introduction 1
General Arrangement 4
General Information 5
Pre-Delivery Checklist 6
Delivery Checklist 6
After ale Checklist 7
Daily Checklist 7
easonal Checklist 7
Decal Identification and Placement 8
afety First 9
Attaching the Disc to the Tractor 10
Transporting the Disc 10
Adjusting the Transport Levelling Control Arm 11
Transport and Operating afety 12
Operating the Disk
General Operating Guidelines 13
Adjust the Levelling Control Arm 13
ervice and Maintenance afety 14
Lubricate the Disk 15
Check the Oil-Bath Bearings 16
Adjusting the crapers 16
Repack and Pre-Load Wheel Hub Bearings 17
Fluid and Fastener pecifications
Disc Gang Assembly Axles 18
Fastener Torque Values 18
Oil-Bath Bearing Oil 18
Tire and Wheel ervice 18
Keep Gang Assemblies Tight 19
Assembly afety 20
Assemble the Disk 21
Hydraulic Lift Cylinder chematic 29
Hydraulic Fold Cylinder chematic 30
Light Kit Component Installation 31
Light Kit chematic 32
Detailed Parts Diagrams 33
Hitch Bridle Assembly 34
Center Frame and Transport Assembly 35
Right Hand Wing Frame and Transport Assembly 36
Left Hand Wing Frame and Transport Assembly 37
2

3
Control Arm Assemblies 38
Gang Bars and Scrapers 39
Gang Assembly (2-1/8” A le) 40
Oil-Bath Bearing Assembly (2-1/8” A le) 41
8” Hydraulic Cylinder (CTD) 42
8” Hydraulic Cylinder (RAM) 43
12” Hydraulic Cylinder (CTD) 44
12” Hydraulic Cylinder (RAM) 45
34” Hydraulic Cylinder (CTD) 46
34” Hydraulic Cylinder (RAM) 47
Disc Blades 48
8-Bolt Hub 49
Tire and Wheel Assembly 50
Oscillating Scraper (Optional) 51
Hydraulic Lift Cylinders and Hose Assembly 52
Hydraulic Fold Cylinders and Hose Assembly 53
Light Kit Components 54
Light Kit Schematic 55
Decals, Reflectors and Logos 56
Specifications 57
Storage 58

1
2
3
4
5
6
7
8
11
12
13
14
15
17
18
19
9
20
21
22
23
24
10
16
21
PRODUCT GENERAL ARRANGEMENT AND IDENTIFICATION
MODELS 4626B / 4628B / 5026B / 5028B
5426B / 5428B / 5826B / 5828B
1 Hi ch Tongue
2 Safe y Chain
3 Hi ch / Bridle Assembly
4 Hi ch Jack
5 Hose Holder & Manual Cannis er
6 Transpor S ay (S orage Loca ion)
7 Transpor Con rol Arm
8 Leveling Con rol Arm
9 Wing Fold Cylinders
10 Cen er Frame Lif Cylinder
13 Tire and Wheel Assembly
14 Righ Hand Wing Transpor
15 Lef Hand Wing Transpor
16 Cen er Sec ion Transpor
17 Righ Hand Wing Frame
18 Lef Hand Wing Frame
19 Cen er Sec ion Frame
20 Gang Wrenches
21 Dep h Con rol Segmen s
22 Safe y Ligh s
23 Disc Gang Assembly
4
11 Wing Frame Lif Cylinder
12 Hub Assembly 24 Gang Bar c/w Scraper Bar