Kenwood multipro Express FDP65.180SI User manual

Instructions
multipro Express
TYPE: FDP65

English 2 - 14
ÝY
pt - os

b
a
2
3
4
5
6
7
11
12
13
14
15
16
9
8
17
18
21
19
22
23
24
25
20
1
1
2
3
10 Plastic blender
Standard attachments
Optional
attachments*

b
a
b
a
c
b
a
11/12 14-15-16
13 17 19
18

c
b
a
50mm
30mm
b
a
b
c
d
e
f
d
c
a
b
21 22
22A
20

d
c
b
a
23
23+22

24
25

09
Safety
O
Read these instructions carefully and retain for future reference.
ORemove all packaging and any labels.
OIf the plug or cord is damaged it must, for safety reasons, be
replaced by Kenwood or an authorised Kenwood repairer in
order to avoid a hazard.
ODO NOT touch the sharp blades. The blades and discs are
very sharp, handle with care. Always hold by the finger grip
at the top, away from the cutting edge, when handling
the sharp cutting blades, emptying the bowl and during
cleaning.
ODO NOT process hot ingredients.
OBe careful if hot liquid is poured into the food processor
or blender as it can be ejected out of the appliance due to
sudden steaming.
ONever leave the appliance unattended when it is operating.
ODo not exceed the maximum capacities stated in the
recommended usage chart.
ODo not operate your appliance for longer than the
times specified below without a rest period. Processing
continuously for longer periods can damage your appliance.
Function/Attachment Maximum
Operation Time Rest Period Between
Operations
Blender/Blend-Xtract 2GO 60 secs Unplug the
appliance and
allow to cool
down for 15
minutes
Heavy mixtures in the
bowl (e.g. Dough) 60 secs
Mini Chopper/Mill 30 secs
Grinding Mill 60 secs
ODo not lift or carry the processor by the handle - or the handle
may break resulting in injury.
OAlways remove the knife blade before pouring contents from
the bowl.
OKeep hands and utensils out of the processor bowl and
blender goblet whilst connected to the power supply. If food
needs to be pushed down use a suitable utensil such as a
spatula.
OAlways switch off the appliance and disconnect from
the supply if it is left unattended and before assembling,
disassembling or cleaning.
ONever use your fingers to push food down the feed tube.
Always use the pusher supplied.
ONever fit the blade assembly to the power unit without the
bottle or mill jar/lid fitted.
OCAUTION: Before removing the lid from the bowl, blender or
mill from the power unit:
2

3
O
switch off;
O
wait until the attachment/blades have completely stopped;
O
be careful not to unscrew the bottle or mill jar/lid from the
blade assembly.
ODo not use the lid to operate the processor, always use the
on/off speed control.
OThis appliance will be damaged and may cause injury if the
interlock mechanism is subjected to excessive force.
ONever use an unauthorised attachment.
ONever use a damaged appliance. Get it checked or repaired:
see ‘service and customer care’.
ONever let the power unit, cord or plug get wet.
ODo not let excess cord hang over the edge of a table or
worktop or touch hot surfaces.
OChildren should be supervised to ensure that they do not play
with the appliance.
OThis appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.
OAppliances can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved.
OOnly use the appliance for its intended domestic use.
Kenwood will not accept any liability if the appliance is subject
to improper use, or failure to comply with these instructions.
OMisuse of your processor, blender or mill can result in injury.
OThe maximum rating is based on the mini chopper/mill
attachment that draws the greatest load. Other attachments
may draw less power.
Blender/Blend-Xtract 2GO
O DO NOT process hot ingredients.
O SCALD RISK: Hot ingredients must be allowed to cool to
room temperature before placing in the goblet/bottle or
before blending.
O Always take care when handling the blade assembly and avoid
touching the cutting edge of the blades when cleaning.
O Only operate the blender with the lid in place.
O Never run the blender empty.
O Smoothie recipes - never blend frozen ingredients that have
formed a solid mass during freezing, break it up before adding
to the goblet/bottle.
Blend-Xtract 2GO
O Only use the bottle with the blade assembly supplied.
O Never drink any hot liquids from the bottle.
O When drinking through the lid, take care that the drink is
smooth. Some experimentation may be necessary to achieve

4
the desired result, particularly when processing firm or
unripened foods as you may find that some ingredients remain
unprocessed.
O Do not blend frozen ingredients or ice cubes without liquid.
O Never blend dry ingredients (e.g. spices, nuts) or run the
Blender empty.
Mill Attachments
O Never fit the blade assembly to the power unit without the jar/
lid fitted.
O Never unscrew the jar/lid while the mill is fitted to your
appliance.
O Do not touch the sharp blades – Keep the blade assembly
away from children.
O Never remove the mill until the blades have completely
stopped.
O The appliance will not work if the mill is incorrectly fitted.
O Do not process hot ingredients in the mill allow to cool down
to room temperature before processing.
Mini Chopper/Mill
O The processing of spices is not recommended as they may
damage the plastic parts.
Grinding Mill
O Do not process dried turmeric root as it is too hard and may
damage the blades.
Juice extractor
O Do not use the juicer if the filter, juicer lid or bowl are
damaged or has visible cracks.
O The cutting blades on the base of the filter drum are very
sharp, take care when handling and cleaning the drum.
O Only use the pusher supplied. Never put your fingers in the
feed tube. Unplug before unblocking the feed tube.
O Before removing the lid, switch off and wait for the filter to
stop.
Express Dice/Express Serve Attachment and Discs
O The cutting grid and discs are very sharp; handle with care
when fitting, removing and cleaning. Always hold by the
finger grip away from the cutting edge when handling
the sharp cutting blades, emptying the bowl and during
cleaning.
O Never use your fingers to push food down the feed tube. Only
use the pusher supplied.
O Do not use excessive force to push food down the feed tube –
you could damage your attachment.

5
Before using for the first time
1 Remove the plastic blade covers from the knife blade. Take care the blades are very sharp. These
covers should be discarded as they are to protect the blade during manufacture and transit only.
2 Wash the parts see ‘care and cleaning’.
Before plugging in
OMake sure your electricity supply is the same as the one shown on the underside of your appliance.
Important – Plug and Fuse Information
O The wires in the cord are coloured as follows:
Blue = Neutral
Brown = Live
O If the plug supplied with your appliance has a fuse fitted and the fuse fails it must be replaced with one of
the same rating.
O If the plug or cord requires replacing a new cord set should be fitted by an Authorised Kenwood Repairer.
Note:
O For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost
then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by
colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).
O If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may
arise if an unwanted non-rewireable plug is inadvertently inserted into a socket outlet.
O This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into
contact with food.
O Before removing the lid, switch off and wait until the disc has
completely stopped.
O Do not pour hot liquids down the feed tube.
Express Serve
O Avoid contact with moving parts. Keep fingers out of the food
outlet opening.
O Do not operate when using the Dicer or Discs without the
slinger plate fitted. If the slinger plate is not fitted food will
clog under the plate and not exit the food outlet, resulting in
damage to your attachment.
O The citrus juicer is not designed to be used with the Express
Serve. Always use the citrus juicer with the main bowl.
Cleaning
O Wipe the power unit with a damp cloth, then dry. Ensure that
the interlock area is clear of food debris.
O Do not immerse the power unit, blade assemblies or blender
base in water.
O The bowl, lid, pusher and all attachments/tools apart from
the blade assemblies and blender are suitable for both
handwashing and dishwashing.
O The blade assemblies should be brushed clean and rinsed under
running water.
O Blender - Fill with warm water, fit the lid, then switch on for 20-30
seconds. Empty, then rinse. If it is still dirty use a brush. Wipe, then
leave to air-dry.

6
Key
Processor - Express Prep
1Pushers
2Feed tube
3Lid
4Bowl
5Detachable drive shaft
6Power unit
7Speed/pulse control
8Safety interlocks
9Cord storage (at back)
10 Plastic Blender (if supplied)
aGoblet with fixed blade
bLid with drip feed
A Standard Attachments
11 Knife blade
12 Dough tool
13 Emulsifying disc
14 4mm slicing/grating disc
Not all of the attachments listed below may be
included with your food processor. Attachments
are dependent upon the model variant. Visit
www.kenwoodworld.com for information on how
to buy an attachment not included in pack.
B Optional Attachments
15 2mm slicing/grating disc (if supplied)
16 Extra fine grating disc (if supplied)
17 Citrus juicer (if supplied)
18 Mini chopper/mill (if supplied)
19 Grinding mill (if supplied)
20 Blend-Xtract 2GO (if supplied)
21 Juice extractor (if supplied)
22 Express Dice (if supplied)
23 Express Serve (if supplied)
24 Storage bag (if supplied)
25 Spatula
To Use Your Food Processor
Illustrations – 
1 Fit the detachable drive shaft onto the power
unit.
2 Then fit the bowl to the power unit and turn
clockwise until it locks into position.
3 Fit an attachment over the bowl drive shaft.
OAlways fit the bowl and attachment onto the
processor before adding ingredients.
4 Fit the lid - ensuring the top of the drive
shaft/tool locates into the centre of the lid.
ODo not use the lid to operate the processor,
always use the on/off speed control.
5 Plug in, switch on and select a speed. (Refer
to the recommended usage chart).
OThe processor will not operate if the bowl
or lid are not fitted correctly into the
interlock. Check that the feed tube and
bowl handle are situated to the right front
hand corner.
OUse the pulse (P) for short bursts. The pulse
will operate for as long as the control is held
in position.
6 Reverse the above procedure to remove the
lid, attachments and bowl.
OAlways switch off and unplug before
removing the lid.
Important
OYour processor is not suitable for crushing
or grinding coffee beans, or converting
granulated sugar to caster sugar.
OWhen adding almond essence or flavouring
to mixtures avoid contact with the plastic as
this may result in permanent marking.
Using The Attachments
Refer to the usage chart, illustrations
and relevant section for each
attachment.
10 Plastic Blender (if supplied)
1 To assemble and use - refer to the Blender
illustrations and the Recommended Usage
Chart.
2 Put your ingredients into the goblet.
3 Fit the lid onto the goblet and turn clockwise
until it clicks.
4 Fit the blender to the power unit and turn
clockwise to lock in position.
OThe appliance will not operate if the blender
is incorrectly fitted to the interlock.
Hints and Tips
OWhen making mayonnaise, put all the
ingredients, except the oil, into the blender.
With the appliance running, pour the oil
slowly through the drip feed hole in the lid.
OThick mixtures, e.g. pâtés and dips, may need
scraping down. If the mixture is difficult to
process, add more liquid.
OThe processing of spices is not
recommended as they may damage the
plastic parts.

7
11 Knife Blade
Follow the instructions under ‘To Use Your Food
Processor’.
Hints and Tips
OFor coarser textures use the pulse control.
OCut food such as meat, bread, vegetables
into cubes approximately 2cm.
OBiscuits should be broken into pieces
and added down the feed tube whilst the
appliance is running.
OTake care not to over-process.
OWhen making pastry use fat straight from
the fridge cut into 2cm cubes.
OFor best results when processing sticky
fruit/ingredients such as dates, use 'Pulse'
first to break down the ingredients and then
continue processing on maximum speed.
12 Dough Tool
Use for yeasted dough mixes.
Follow the instructions under ‘To Use Your Food
Processor’.
Hints and Tips
ODo not process for longer than 60 seconds.
OPlace the dry ingredients in the bowl and
add the liquid down the feed tube whilst the
appliance is running. Process until a smooth
elastic ball of dough is formed.
ORe-knead by hand only. Re-kneading in the
bowl is not recommended as it may cause
the processor to become unstable.
13 Emulsifying Disc
(use in conjunction with Dough Tool 12 )
1 Fit the emulsifying disc over the dough tool –
align the fins on the dough tool with the slots
in the disc.
2 Turn the dough tool anti-clockwise to lock in
place.
3 To separate the parts turn clockwise and lift
the disc off the dough tool shaft.
Hints and Tips
OEnsure the bowl and tool are clean and free
from grease before use.
OMayonnaise - Place the egg and seasonings
into the bowl and mix for a few seconds.
With the machine running gradually add the
oil down the feed tube in a steady stream.
14 –15 –16 Discs
1 Fit the drive shaft and bowl onto the power
unit.
2 Holding by the centre grip, place the disc
onto the drive shaft with the appropriate side
uppermost.
3 Fit the lid.
4 Put the food in the feed tube. Choose which
size feed tube you want to use.
To use the small feed tube - first put the
large pusher inside the feed tube. Use for
individual thin ingredients.
Do not use the small pusher without the
larger pusher fitted, otherwise you may
damage the bottom of the pusher.
To use the large feed tube - use both
pushers together.
5 Switch on and push down evenly with the
pusher 1- never put your fingers in the
feed tube.
Hints and Tips
OUse fresh ingredients
O
Do not cut food too small. Fill the width of
the feed tube fairly full. This prevents the food
from slipping sideways during processing.
OWhen slicing or grating: food placed
upright comes out shorter than food placed
horizontally.
OThere will always be a small amount of waste
on the disc or in the bowl after processing.
17 Citrus Juicer (if supplied)
aCone
bSieve
To use the citrus juicer
1 Fit the drive shaft and bowl onto the power
unit.
2 Fit the sieve into the bowl - ensuring the sieve
handle is locked into position directly over
the bowl handle.
3 Place the cone over the drive shaft turning
until it drops all the way down.
4 Cut the fruit in half. Then switch on and press
the fruit onto the cone.
OThe citrus juicer will not operate if the sieve
is not locked correctly.
Hints and Tips
OFor best results store and juice the fruit
at room temperature and hand roll on a
worktop before juicing.
OTo help with juice extraction move the fruit
from side to side when juicing.
OWhen juicing large quantities, empty the
sieve regularly to prevent the build up of
pulp and seeds.

8
18 Mini Chopper/Mill (if supplied)
aJar
bSealing ring
cBlade assembly
1Put the ingredients into the jar.
2Fit the sealing ring into the blade assembly.
3Turn the blade assembly upside down. Lower
it into the jar, blades down.
4Screw the blade assembly onto the jar until
finger tight. Refer to the graphics on the
underside of the blade assembly as follows:
- Unlocked position
- Locked position
5Place the mill onto the power unit and turn
clockwise to lock in position
6Select Maximum speed or use the pulse (P).
Hints and Tips
OBaby food/purée - allow cooked food to
cool down to room temperature before
processing in the mill.
OFor best results the main bowl is
recommended when chopping herbs.
19 Grinding Mill (if supplied)
aMill lid
bGrinding mill blade assembly
1 Place your ingredients into the blade
assembly.
2 Fit the lid and turn clockwise to lock.
3 Place the mill onto the power unit and turn
clockwise to lock.
4 Select maximum speed or use the pulse (P).
Hints and Tips
OFor optimum performance when processing
spices do not process more than 50g at a
time.
OWhole spices retain their flavour for a much
longer time than ground spices so it is best
to grind a small quantity fresh at a time to
retain the flavour.
OTo release the maximum flavour and
essential oils whole spices are best roasted
prior to milling.
ODo not process dried turmeric root in the mill
as it is too hard and may damage the blades.
OCut ginger and coconut into small pieces
before processing.
OFor best results the main bowl is
recommended when chopping herbs.
20 Blend-Xtract 2GO (if supplied)
aDispensing lid
bBottle
cSealing ring
dBlade assembly
1 Add ingredients to the bottle up to the
400ml level mark.
OFor best blending performance always add
ice/frozen ingredients to the bottle first.
OWhen adding frozen ingredients (i.e. frozen
fruit, yoghurt, ice cream or ice) do not blend
more than 60g or 3 ice cubes.
ODo not blend frozen ingredients without
liquid.
2 Fit the sealing ring to the blade unit, ensuring
the seal is located correctly in the grooved
area.
OLeaking will occur if the seal is damaged or
incorrectly fitted.
3 Hold the underside of the blade unit and
lower it onto the bottle, blades down.
4 Screw the blade holder onto the bottle - turn
clockwise to lock.
OShake to disperse the ingredients.
OPlace the blender onto the power unit and
turn clockwise to lock.
5 Select maximum speed. Allow the ingredients
to blend until smooth.
OOnce your drink has reached the desired
consistency, you can use the pulse (P) to
ensure all ingredients are thoroughly blended.
Hints and Tips
ONote that when the bottle is filled to max
capacity (400ml), this is approximately two
servings.
OIf you do not intend to consume your drink
immediately, keep it refrigerated.
OEnsure your drink is thin enough to be able
to drink from the dispensing lid. To make a
thinner drink add more liquid.
OAfter blending, some drinks may not be
completely smooth due to seeds or the
fibrous nature of ingredients.
OSome drinks may separate on standing,
therefore it is best to drink them straight
away. Separated drinks should be stirred
before drinking.
OWhen the dispensing lid is fitted always keep
the bottle upright.
Using the drinking lid
1 Fit and lock the lid by turning clockwise.
2 When you want to drink, simply flip open the
lid cover. The drink can be consumed straight
from the bottle.

9
21 Juice Extractor (if supplied)
aPusher
bJuicer lid
cPulp remover
dFilter drum
eBowl
fJuicing spout
To use the juice extractor
1 Fit the juicer bowl to the power unit, turn
clockwise until it locks - the spout should
be situated to the left side when the bowl is
fitted correctly.
2 Place the pulp remover into the filter drum -
ensuring the tabs locate with the slots in the
bottom of the drum.
3 Fit the filter drum
4 Fit the attachment lid - turn clockwise until
it locks. Your juicer will not operate if the
bowl or lid are not fitted correctly into the
interlock .
5 Place a suitable glass or jug under the juice
outlet.
6 Cut the food to fit the feed tube.
7 Switch on and push down evenly with the
pusher - never put your fingers in the feed
tube. Process fully before adding more.
OAfter adding the last piece, let the juicer run
for a further 30 seconds to extract all the
juice from the filter drum.
important
OIf the juicer starts to vibrate, switch off and
empty the pulp from the drum. The juicer
vibrates if the pulp becomes unevenly
distributed.
OSome very hard foods may make your juicer
slow down or stop. If this happens switch off
and unblock the filter.
OSwitch off and clear the pulp collector
regularly during use.
Hints and Tips
OBefore processing remove stones and pips
(eg pepper, melon, plum) and tough skins
(e.g. melon, pineapple). You do not need to
peel or core apples and pears.
OUse firm, fresh fruit and vegetables.
22 Express Dice (if supplied)
aDicing disc
bDicing grid
cDicing pusher
Important
OThe dicing disc is designed only to be used
with the dicing attachment.
OThe dicing pusher should only be used with
the dicing grid. Using it without the dicing
grid fitted will result in damage to the bottom
of the pusher.
To use the Express Dice
1 Fit the drive shaft and bowl onto the power
unit.
2 Add the dicing disc and fit the lid.
3 Fit the dicing grid into the feed tube.
4 Switch on and use the dicing pusher to
process food items through the dicing grid.
Hints and Tips
OTo assist with processing place both hands on
top of the pusher and press down firmly.
OFor best results, use fresh fruit and
vegetables.
OTo prevent the food from jamming do not
pack the food tightly in the feed tube –
ideally the food should be cut no larger than:
50 × 30mm
OIf the food is too hard to push through the
grid cook for approximately 10-15 minutes,
then allow to cool in a refrigerator before
processing.
OAlways remove hard skins, stones, pips and
seeds etc., from food before processing.
Note:
ODue to the various sizes and shapes of
foods, the diced results will contain some
misshapen pieces, this is normal.
OFoods such as cheese, ham, and chorizo will
clog in the grid so are not recommended for
use with this attachment.
22A The Express Dice can also be used to
produce French fries, crudités and batons.
1 Fit the dicing grid without the dicing disc.
2 Then manually push the food through the
grid without switching the appliance on.

10
Cleaning the grid
Use the end of the pusher to dislodge any food
which may become trapped in the dicing grid.
23 Express Serve (if supplied)
aExpress serve drive shaft
bExtension chute
cBase
dSlinger plate
1 Fit the drive shaft and bowl onto the power
unit.
2 Fit the small drive shaft to the main shaft – the
Express serve will not operate unless fitted.
3 Fit the required attachment/disc - do not
apply excessive force. Refer to the Discs and
Express Dice sections for further information,
hints and tips.
4 Fit the lid.
Use in conjunction with the following:
14-15-16 22
Important - Dicer and Discs
OIf the food is not exiting the food outlet, switch
off and check that food is not clogging under
the disc and the slinger plate is fitted. Clear
any trapped food before continuing to process.
24 Storage Bag
Store your discs, emulsifying disc and dough tool
in the bag supplied.
For safety reason the knife blade should be
stored in the main bowl instead of the storage
bag when not in use.
Care and Cleaning
O
Always switch off and unplug before cleaning.
OHandle the blade and cutting discs with care
- they are extremely sharp.
OSome foods may discolour the plastic. This is
perfectly normal and will not harm the plastic
or affect the flavour of your food. Rub with a
cloth dipped in vegetable oil to remove the
discolouration.
Power Unit
OWipe with a damp cloth, then dry. Ensure
that
the interlock area

is clear of food debris.
ODo not immerse the power unit in water.
OPush any excess cord into the storage area at
the back of the power unit .
Cleaning Instructions - Refer to the
relevant Illustration 25.

11
Service and Customer Care
UK
If you need help with:
Ousing your appliance or
Oservicing, spare parts or repairs (in or out of
guarantee)
call Kenwood customer care on
0345 222 0458. Have your model number
(e.g. TYPE: FDP65) and date code (5 digit
code e.g. 21T04) ready. They are on the
underside of the power unit.
Ospares and attachments
 call 0844 557 3653.
Other countries
OIf you experience any problems with the
operation of your appliance, before requesting
assistance refer to the ‘Troubleshooting
Guide’ section in the manual or visit
www.kenwoodworld.com.
OPlease note that your product is covered
by a warranty, which complies with all legal
provisions concerning any existing warranty
and consumer rights in the country where the
product was purchased.
OIf your Kenwood product malfunctions or you
find any defects, please send it or bring it to
an authorised KENWOOD Service Centre.
To find up to date details of your nearest
authorised KENWOOD Service centre visit
www.kenwoodworld.com or the website
specific to your Country.
ODesigned and engineered by Kenwood in the
UK.
OMade in China.
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH THE EUROPEAN DIRECTIVE ON WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE)
At the end of its working life, the product must
not be disposed of as urban waste. It must be
taken to a special local authority differentiated
waste collection centre or to a dealer providing
this service.
Guarantee UK only
O If your food processor goes wrong within one
year from the date you bought it, we will repair
it (or replace it if necessary) free of charge
provided:
O it has been used in accordance with these
instructions.
O you have not misused, neglected, or damaged it;
O it has not been modified (unless by KENWOOD);
O it is not second hand;
O it has not been used commercially;
O you have not fitted a plug incorrectly; and
O you supply your receipt to show when you
bought it.
This guarantee does not affect your statutory
rights.

12
Recommended Usage Chart
Do not operate your appliance for longer than the times specified below without a rest period.
Do not exceed the maximum capacities stated in the chart below.
Processing continuously for longer periods can damage your appliance.
Processing information supplied is for guidance only and will vary depending on the exact recipe and
ingredients being processed.
Do not process hot ingredients
Tool/
Attachment
Function
(Secs) MAX
All in one cake mixes 2 10 – 20 1.5kg total
weight
Pastry - rubbing fat into flour
Adding water to combine pastry
ingredients
2
1 – 2
10
10 – 20
340g flour
weight
Chopping fish and lean meat
Pâtés and terrines
2 10 – 30 600g max
lean beef
Chopping vegetables P 5 – 10 100 - 500g
Chopping nuts 2 30 – 60
100g – 200g
Herbs 2 20 – 30 30-50g
Pureeing soft fruit, cooked fruit and
vegetables
2 10 – 30 1kg
Mayonnaise 2 60 – 80 4 egg yolks
Whipping cream (Processing times may
vary, depending on fat content of cream)
1 15 – 30 250-500ml
Yeasted mixes 2 60 600g flour
weight
1kg total
weight
Grating and slicing firm food items -
cheese, carrots, potatoes and foods of a
similar texture
2–
Do not fill
above the
maximum
capacity
marked on
the bowl
Slicing softer food items - cucumbers and
tomatoes
1–
Grates Parmesan cheese
Rasping potatoes
2–
Use to squeeze the juice from citrus fruits
e.g.oranges, lemons, limes and grapefruits.
1––

13
Recommended Usage Chart
Tool/
Attachment
Function
(Secs) MAX
Cold liquids and drinks
(Add ice/frozen ingredients to goblet
last)
2 30 – 60 1.5 litre
Milkshake/Cold milk based mixtures 2 15 – 30 1 litre
Ice crushing P 30 – 40 6 ice cubes
(125g)
Batter mix
(Add liquid ingredients first)
1
2
10
50
1 litre
Nuts 2 10 – 30 50g
Coee beans 2 30 50g
Prune Marinade
250g clear runny honey
25g small soft prunes
25ml cold water
Refrigerate the ingredient overnight
P 5 300g
Processing spices
Black peppercorns, cardamom seeds,
cumin seeds, coriander seeds and fennel
seeds
2
30 – 60
50g
Grinding coee beans 2 50g
Chopping nuts P – 50g
Processing garlic cloves, fresh chillies and
root ginger
P – 30g
Fresh coconut 2/P 30 – 60 40g
Drinks & smoothies 2 30 – 60 400ml
Fruit and vegetables 2 – 600g
Use to cut a variety of foods such as
carrot, courgette, cucumber, beetroot and
apples into cubes.
2–
Do not fill
above the
maximum
capacity
marked on
the bowl
Use to cut a variety of foods such as
potato, carrot, courgette and cucumber
into French Fries and crudités.
Manual

14
Troubleshooting Guide
Problem Cause Solution
The processor will not
operate.
No Power.
Bowl not fitted to power
unit correctly.
Bowl lid not locked on
correctly.
Check processor is plugged in.
Check bowl is located correctly and the
handle is situated towards the right front
hand corner.
Check that the lid interlock is located
correctly into the handle area.
The processor will not work if the bowl
and lid are fitted incorrectly.
Detachable drive shaft 
not fitted to power unit.
Fit the detachable drive shaft onto the
power unit before fitting the bowl. The
bowl tools and attachments will not operate
unless the drive shaft is fitted.
Blender, Blend-Xtract 2GO
or mill will not operate
Blender, Blend-Xtract
2GO or mill not locked on
correctly.
Blend-Xtract 2GO or mill not
assembled correctly.
Blender, Blend-Xtract 2GO or mill will not
operate if fitted incorrectly to the interlock.
Check blade assembly is fully tightened into
the bottle or jar.
Processor stops during
processing
Processor overloaded/
maximum capacities
exceeded.
Lid unlocked.
Check maximum capacities stated in the
recommended usage chart.
Check lid is locked correctly.
Blend-Xtract 2GO or multi
mill leaking from blade
assembly base.
Seal missing
Seal incorrectly fitted
Seal damaged.
Check seal is fitted correctly and not
damaged. To obtain a replacement seal see
‘Service and customer care’.
Unit unstable/heavy
vibrations and movement.
Sticky fruit/ingredients such
as dates being processed.
Speed selected too low.
For best results use 'Pulse' first to break
down the ingredients and then continue
processing on maximum speed.
Poor performance of
tools/attachments
Refer to hints in relevant ‘using the attachment’ section. Check
attachments are assembled correctly.