Kenwood TK-7100 User manual

ALPHANUMERIC LCD DISPLAY
The luminous LCD found
on the TK-7100/8100
offers user-friendly oper-
ation thanks to its 13-
segment, 8-digit alpha-
numeric display with
multiple capabilities.
64 CHANNELS
Providing you with more versatility and
convenience, the memory allocation of the
TK-7100/8100 allows programming of up
to 8 groups within 64 channels.
SCAN FUNCTIONS
Priority Scan and Group Scan (single/multi)
can be set; add and delete channel(s)
function can also be performed.
TOUGH, COMPACT CONSTRUCTION
Built to take rough treatment in stride, the
TK-7100/8100 meets ten stringent MIL-STD 810
C/D/E/F standards. The
“bathtub” construction
of the chassis assures
excellent heat dissi-
pation characteristics,
and installation is
simplified thanks to
the compact external
dimensions —
160mm (W) x 43mm
(H) x 107mm (D).
HIGH-QUALITY SPEAKER
The large-diameter oval (58mm x 35mm)
speaker mounted in the front panel assures
excellent clarity.
DTMF / MSK PTT ID
The TK-7100/8100 features two PTT ID
formats — DTMF (max. 16-digit DTMF code)
and MSK (FleetSyncTM format ID). PTT ID is a
digital ANI (Automatic Number Identifier) that
can be sent on each PTT, allowing clear identi-
fication of the person using the transceiver.
* DMS (Digital Message System) function has been renamed to FleetSync.
VERSATILE DTMF MODES
The TK-7100/8100 can be set for the
following DTMF encode and decode modes:
■Code Squelch: DTMF code squelch pro-
vides a 3- to 10-digit ID for DTMF paging
operations.
■Selective Call: DTMF selective calling is
a signalling function comprised of DTMF
codes (ID code + Intermediate code +
Status code) that allows reception even
if the radio is left unattended. SQ opens
when the set ID and intermediate code
matches the maximum display of the
5-digit numeric status code.
■Number display*: When the DTMF code is
received — such as the PTT ID number — it
is displayed on the LCD for instant recognition.
* Does not operate while Code Squelch or Selective Call is activated.
OPERATOR SELECTABLE TONE
Users can freely change the 16 QT/DQT sig-
nalling tones that were set with the FPU; each
signalling tone can also have an 8-digit name.
OTHER FEATURES
● Built-in QT/DQT Signalling ●SmarTrunk II™
OMNI capability (requires SmarTrunk board*)
●Data Ready (KDS-100, KGP-2A/2B, and 8
Programmable Function Port) ●Encryption
Control Capability ●PC**/Self Programming
●AVL capability (with KGP-2A/2B) ●Backlit keys
for all buttons ●Ignition sense input ●4-Pro-
grammable Keys ●Busy Channel Lockout
●Embedded Message ●Security features
including Radio stun, Radio password, Data
password, Embedded message, and Kenwood
ESN ● Channel direct ●Time out Timer (TOT)
●Wide/narrow selection per channel
*SmarTrunk board is available from SmarTrunk Systems, Inc.
**Compatible with Windows 98/ME/2000/XP, English or Spanish version.
Compact yet offering many powerful
features, Kenwood's TK-7100/8100
mobiles are designed to play the
leading role in your communications.
These radios are also built tough
enough to withstand all the rigors of
today's demanding applications.
TK-7100/8100
Compact Synthesized FM Mobile Radios
tk7100_8100sin.qxd 07.10.31 13:24 Page 1

CL564M-E-2
Specifications
TK-7100 TK-8100
GENERAL
Frequency Range
Type 1 146-174 MHz 440-480 MHz
Type 2 136-162 MHz —
Channels / Groups 64 CH / 8 GRP
(Up to 64 channels can be allocated into 8 groups)
Channel Spacing (Wide / Narrow) 25 kHz / 12.5 kHz
PLL Channel Stepping 2.5 kHz, 5 kHz, 5 kHz, 6.25 kHz
6.25 kHz, 7.5 kHz
Operating Voltage 13.6 V, DC ±15%
Current drain
Standby 0.4 A
Receive 1.0 A
Transmit 8.0 A
Operating Temperature Range -30°C ~ +60°C
Frequency Stability (-30°C ~ +60°C) ±2.5 ppm
Dimensions
(W x H x D, without projections) 160 mm x 43 mm x 107 mm
Weight (Body only, approximate) 1.0 kg
Antenna Impedance 50 Ω
Channel Frequency Spread
Type 1 28 MHz 40 MHz
Type 2 26 MHz —
TK-7100 TK-8100
RECEIVER (Measurements made per EIA/TIA-603)
Sensitivity (Wide / Narrow) 0.28µV / 0.35µV (12dB SINAD)
Selectivity (Wide / Narrow) 75 dB / 65 dB
Intermodulation Distortion
(Wide / Narrow) 70 dB / 60 dB
Spurious Response 75 dB
Audio Output (4Ω, 5% Distortion) 4.0 W
TRANSMITTER (Measurements made per EIA/TIA-603)
RF Power Output (High / Low) 25W / 5W
Spurious & Harmonics 70 dB
Modulation (Wide / Narrow) 16K0F3E / 11K0F3E
FM Noise (Wide / Narrow) 45 dB / 40 dB
Audio Distortion Less than 3%
Microphone Impedance 600Ω
Kenwood reserves the right to change specifications and features without prior notice.
SmarTrunk IITM is a trademark of SmarTrunk Systems, Inc.
FleetSyncTM is a trademark of Kenwood Corporation.
Options
All accessories and options may not be available in all markets. Contact an authorized
Kenwood dealer for details and complete list of all accessories and options.
KMC-30
Microphone
KMC-32
16-key Keypad
Microphone
KMC-9C
Desktop Microphone
KES-3
External Speaker
KLF-2
Line Filter
KPS-10A
Regulated DC
Power Supply
KMB-10
Key Lock Adapter
KMB-19
Installation Kit
KGP-2A
GPS Receiver Modem
(requires KCT-39 option)
KGP-2B
GPS Controller Modem
(requires KCT-39 option)
KDS-100
Mobile Data Terminal
(requires KCT-39 option)
KCT-18
Ignition Sense Cable
(requires KCT-39 option)
KCT-36
3m Extension Cable
(for KCT-39)
KCT-39
Connection Cable
Applicable MIL-STD
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1 /Procedure I 500.2 /Procedure I, II 500.3 /Procedure I, II 500.4 /Procedure I, II
High Temperature 501.1 /Procedure I, II 501.2 /Procedure I, II 501.3 /Procedure I, II 501.4 /Procedure I, II
Low Temperature 502.1 /Procedure I 502.2 /Procedure I, II 502.3 /Procedure I, II 502.4 /Procedure I, II
Temperature Shock 503.1 /Procedure I 503.2 /Procedure I 503.3 /Procedure I 503.4 /Procedure I, II
Solar Radiation 505.1 /Procedure I 505.2 /Procedure I 505.3 /Procedure I 505.4 /Procedure I
Humidity 507.1 /Procedure I, II 507.2 /Procedure II, III 507.3 /Procedure II, III 507.4
Salt Fog 509.1 /Procedure I 509.2 /Procedure I 509.3 /Procedure I 509.4
Sand & Dust 510.1 /Procedure I 510.2 / Procedure I 510.3 / Procedure I 510.4 / Procedure I, III
Vibration 514.2 / Procedure VIII, X 514.3 / Procedure I Cat. 8 514.4 / Procedure I Cat. 8 514.5 / Procedure I Cat. 20
Shock 516.2 / Procedure I, II, III, V 516.3 / Procedure I, IV, V 516.4 / Procedure I, IV, V 516.5 / Procedure I, IV, V
tk7100_8100sin.qxd 07.10.31 13:24 Page 2