Kesseböhmer WASTEBIN PULLOUT User manual

WASTEBIN PULLOUT (REPLACING THE UNDER-MOUNT RUNNER)
1. Open the cabinet and remove the wastebins
2. Push the green buttons at the bottom of the frame and pull / punch the door forward
to open the ClickFiXx connection
3. Remove the complete door-rail-unit (don’t remove or loosen any door mounting
screws)

4. Dismount the two front screws and remove the frame (at the rear frame is just
hooked in)
5. Replace the runners
(Mark the old runner positions with a pen around the brackets rst and place the new
ones accordingly)
6. Assemble the unit in reverse order. While installing the bottom frame make sure it’s
hooked-in at the rear side. Place the door-rail-unit on top of the four ClickFixx bolts and
move the door-unit against the bottom frame until the green bolts are locked
Kesseböhmer USA Inc. | 106 Market Street | Suite 300 | Wilmington, NC 28401 | 910-338-5080
[e-mail] | www.cleverstorage.com