KFI 110465 User manual

RETAIL WINCH DISPLAY
Display PART # 110465
Hardware Kit: HK-073
Kit Components:
Qty. Part Description
1................. Winch Display Plate
1................. Binder Display Bracket
2................. Zip Tie
4................. Spacer
4................. M8-1.25 x 45mm Bolt
2................. 1/4”-20 x 1/2” Slotted Screw
2................. 1/4” Nylock Nut
INSTALLATION INSTRUCTIONS:
1. Assembletherollerfairleadtothefairleadbracketusingthe
itemsincludedinyourwinchbox.(SeeFigures1&4)
2. AssemblewinchtodisplayusingthesuppliedlongerM8
boltsandspacers,seeFigure2,usewashersandlock
washerssuppliedwithwinchifneeded.
3. Installmini-rockerswitchusinghardwareprovidedwith
yourwinch.(SeeFigure2)Wheninstallingthemini-rocker
placetheotherhalfofthehandlebarbrackettotheback
side.
4. Installbinderdisplaybracketusingthe1/4”screwsandnuts
providedinthekit.(SeeFigure3)
“Figure 2” Winch Install
“Figure 1”
©2012 Copyright Kappers Fabricating, Inc. All rights reserved
“Figure 3” Binder Display Bracket Install
1.

©2012 Copyright Kappers Fabricating, Inc. All rights reserved
5. DonotcuttheRubberBandonthecableasthiswillallow
thecabletounravelwhencustomerswanttotryouttheFree
SpoolKnob.InsteaduseoneofthesuppliedZipTiesto
wraparoundthespoolandthroughtheloopasshownin
Figure4.
6. AssemblethehookandKFIpullstraptothewinchcable
loopusingtheincludedZipTiesasshowninFigure4.
Zip-Tie
“Figure 4” Zip Tie Install
2.