KIDDY Evostar Light 1 User manual

Stroller
INSTRUCTION MANUAL
EN / DE / ES / FR / IT / PT / PL / NL Booklet 1

43
21
1
FA
C
B
D
E
2
5
3
1 2
5
4
8
2
1
4
7
a
cd
e
b
6
1
1
2
3
45
3

13
a
bc
d
11
2
1
3
9
5
6
15
1
32
4
16
3
1
10
7
8
6
12
1
a
d
14
1
3
2
2
4
a

17
1
18
19
1
2
20
CLICK
21 22
a
b
c
1
24
CLICK
23
a
f
1
a
b

27
29
1
31
CLICK
26
30 CLICK
CLICK
32
2
1
28
1
1
25

33
2
1
34
1
36
1
2
3
37
1
1
2
2
3
38
11
40
1 2 3 4 5
6
39
35

Please read these instructions carefully
before using this stroller for the rst time.
Keep this manual for future reference.

ENEN
Table of contents
1. Introduction 5
2. General safety tips 5
3. Unpacking 8
4. Adjustments 8
4.1 Unfolding the chassis 8
4.2 Removing and attaching of the seat unit 9
4.3 Adjustment of the handle bar 9
4.4 Folding the chassis 9
4.5 Attaching and removing the sun canopy 9
4.6 Adjustment of the sun canopy 10
4.7 Removing and attaching the back wheels 10
4.8 Locking the swivel front wheels 10
4.9 Adjustment of the parking brake 11
4.10 Adjustment of the reclined / upright position 11
5. Securing the child with the 5-point belt system 11
5.1 Opening the 5-point belt system 11
5.2 Adjustment of the 5-point belt system
and securing the child 11
5.3 Height adjustment of the shoulder belts 12
6. Using with the carrycot 12
6.1 Assembling the carrycot 12
6.2 Attaching the carrycot hood 13
6.3 Attaching the carrycot apron 13
6.4 Adjusting the carrycot hood 13
6.5 Mounting the adapters 13
6.6 Fitting the carrycot 13
6.7 Removing the carrycot 14
6.8 Removing the adapters 15

EN
4
7. Using with an infant carrier 15
7.1 Mounting the adapters 15
7.2 Mounting and removing an infant carrier 15
7.3 Removing the adapters 16
8. Removing and mounting the 5-point belt system
and the cover 16
8.1 Removing and mounting the 5-point belt system 16
8.2 Removing and mounting the cover 16
9. Care and maintenance 17
9.1 Care and maintenance of the chassis 17
9.2 Fabric care in general 17
10. Warranty 18

5
EN
Operating manual Evostar Light 1
1. Introduction
We’re delighted that you have chosen the Evostar Light 1 as your pre-
ferred stroller.
e Evostar Light 1 is another innovative product in our stroller line.
is stroller is a rst-class product that guarantees a long-term useful
life, if used correctly.
Your Evostar Light 1 is EN 1888 tested and homologated.
A lie-at carrycot can be purchased as an optional extra, is suitable
for occasional overnight sleeping and comes complete with padded
liner and mattress.
2. General safety tips
WARNING
1. Important: Keep these instructions for future
reference. Please read these instructions carefully
before using this stroller. Your child´s safety maybe
aected if you do not follow these instructions.
2. Never leave your child unattended.
3. Ensure that all the locking devices are engaged
before use.

EN
6
4. To avoid injury ensure that your child is kept away
when unfolding and folding this product.
5. Do not let your child play with this product.
6. Always use the restraint system (5-point belt
system / harness).
7. Check that the pram body or seat unit or car seat
attachment devices are correctly engaged before
use.
8. is product is not suitable for running or skating.
9. is product is intended for a child from birth
up to 20 kg (approx. 4 years of age). If you use the
stroller with an infant carrier (baby car seat), it can
be used from birth up to 13 kg.
10. e parking device shall be engaged when
placing and removing the children.
11. Any goods carried in the basket are not to ex-
ceed 3 kg.
12. Any load attached to the handle and / or on the
back of the backrest and / or the sides of the vehicle
aects the stability of the pram / pushchair.

7
EN
13. is product is designed for one child only.
14. e seat unit can only be paired with the manu-
facture‘s allowed chassis.
15. Accessories which are not approved by the
manufacturer shall not be used.
16. Should your child need to sleep, then it should
be placed in a suitable pram body, cot or bed.
17. Only replacement parts supplied or recom-
mended by the manufacturer / distributor shall be
used.
18. To prevent a possible choking hazard, remove and
discard packing material before using this product.
19. Do not carry or roll stroller on stairs or escala-
tors with child in it.
20. Do not use this product if any parts are missing
or broken.
21. Do not allow child to stand on the footrest.
Stroller may tip over and injure child.

EN
8
22. For the baby younger than 6 months, the back
of seat shall be adjusted to the fully tilted position.
23. Keep away from re.
3. Unpacking
Unpack all the parts and make sure that all the parts are there.
Frame (g. 1, A)
Back panel (g. 1, B)
Back wheels (g. 1, C)
Front wheels (g. 1, D)
Seat unit (g. 1, E)
Sun canopy (g. 1, F)
4. Adjustments
4.1 Unfolding the chassis
Firstly open the folding lock at front side of the frame (g. 2, no. 1).
en open chassis by pulling the front part frontwards (g. 3, no. 1)
and rear part rearwards (g. 3, no. 2). ereafter open folding lock at
rear side (g. 2, no. 2) and pull handle bar upwards (g. 3, no. 3) until
each lock into place at both sides.
Turn the seat unit upwards (g. 4, no. 4) and fold out the seat plate to
the foot end (g. 4, no. 5).

9
EN
4.2 Removing and attaching of the seat unit
For removing fold the seat plate to the backrest (g. 5, no. 1) and
turn both together to the foot end (g. 6, no. 2). Slide the both re-
lease buttons backwards (g. 6, no. 3) and pull the seat unit upwards
(g. 6, no. 4).
For attaching insert the both connector plugs of the seat unit on the
left and right support (g. 6, no. 5) on the chassis until it lock into place.
Pull the seat unit upwards to check if it is locked securely.
e seat unit can be placed in driving direction and against the driv-
ing direction.
4.3 Adjustment of the handle bar
Turn the handle in the middle frontwards (g. 7, no. 1) and slide the
handle bar in the desired position (g. 7, a–b–c–d–e).
Release the handle in the middle and slide the handle bar until it locks
into place at both sides.
4.4 Folding the chassis
Turn the front wheels against the driving direction (g. 8, no. 1). Move
thesuncanopyasexplainedatpoint4.6tothelowestposition(g.12,a).
Fold the seat plate to the backrest (g. 5, no. 1) and turn both togeth-
er backwards (g. 8, no. 2). Adjust the handle bar in lowest position
(g. 7, a). Turn the handle in the middle backwards (g. 8, no. 3) until
rear frame with the handle bar is collapsing downwards freely (g. 8 /
9, no. 4). Push the button at the handle in the middle of the basket
(g. 9, no. 5) and lift up simultaneously the handle (g. 9 / 10, no. 6)
until the chassis is collapsing (g. 10). Ensure that both folding locks
are closed (g. 10, no. 7 + 8).
4.5 Attaching and removing the sun canopy
For attaching connect at both sides the button on the backrest (g. 11,
no. 1). Push at both sides the lower clip of the sun canopy downwards
(g.11,no.2)andtheupperclipupwards (g. 11, no. 3) into the intended
supports.

EN
10
If you want to remove the sun canopy proceed like described above
in reverse manner.
4.6 Adjustment of the sun canopy
Remove the back panel (g. 14, no. 1).
Height adjustment by pushing the two buttons of the lower adjust-
ment option (g. 12, no. 1) and simultaneous sliding between four
positions (g. 12, a–d). Opening and closing by pushing at the front
frame (g. 13, a–b–c–d).
Re-install the back panel (g. 14, g. 2 + 3).
4.7 Removing and attaching the back wheels
To remove the back wheels at each side push the button in the mid-
dle of the rim (g. 15, no. 1) and pull out the wheel set simultaneously
(g. 15, no. 2).
To attach the back wheels at each side push the button in the middle
of the rim (g. 15, no. 1) and plug simultaneously the horizontal axis in
the hole of each wheel support until it clicks into place (g. 15, no. 3).
Check by hand pull tests whether both back wheels are locked se-
curely to the frame.
4.8 Locking the swivel front wheels
To lock a front wheel set bring it in “straight forward” direction and
turn the locking switch above the wheel set clockwise at left front
wheel (g. 16, no. 1) and counterclockwise at right front wheel (g. 16,
no. 2).
To release the wheel set turn the locking switch counterclockwise at
left front wheel (g. 16, no. 3) and clockwise at right front wheel (g. 16,
no. 4).

11
EN
4.9 Adjustment of the parking brake
To set the parking brake push the pedal downwards (g. 17, no. 1).
Don‘t let go of the stroller until you are sure that the parking brake is
fully engaged.
To loosen the parking brake push the pedal downwards again (g. 17,
no. 1).
4.10 Adjustment of the reclined / upright position
To adjust the reclining position pull the handle upwards and turn si-
multaneously the backrest in one of the positions (g. 18, a–b–c).
Ensure that the backrest is fully engaged at both sides. After adjust-
ing the inclination, check the belt length and readjust it.
For newborns up to 6 months the lowest lie-at position (g. 18, c) is
intended.
5. Securing the child with the 5-point belt system
5.1 Opening the 5-point belt system
Push the button in the middle of the buckle (g. 19, no. 1) and the
buckle tongues will come outwards (g. 19, no. 2).
5.2 Adjustment of the 5-point belt system and securing the child
Place your child in the seat unit, put the shoulder belts over child’s
shoulderand place the buckle betweenthelegsof the child. Fit togeth-
er the two connectors on the harness straps and push rmly into the
buckle housing until they click together (g. 20). Check by hand pull
tests whether the belt system is locked securely.
e length of the belt system can be adjusted by sliding the two belt
adjusters at the shoulder belts and the belt adjuster at crotch belt
(g. 21).
In order to optimize the child’s posture, the end of the crotch belt
can be anchored in two dierent positioned holes (g. 22, a + b). To
remove the crotch belt, push the plastic clip at the end through the

EN
12
seat from the bottom side. Mount the belt by pushing the clip from
the top side through the desired hole. Make sure that the clip lays at
on the seat bottom side and the belt is not twisted. For children up to
a height of approx. 100 cm, anchor the end of the crotch belt in the
rear hole (g. 22, b) is preferable.
e belt system is adjusted correctly when the belts lay rmly on the
child’s body, not twisted and without pressure.
5.3 Height adjustment of the shoulder belts
Remove the back panel (g. 14, no. 1).
Height adjustment by pushing the two buttons of the upper adjust-
ment option (g. 23, no. 1) and simultaneous sliding between six po-
sitions (g. 23, a–f).
To secure children from birth up to 6 months by the 5-point belt
system, adjust the shoulder belts in the lowest position (g. 23, a) and
recline the backrest in lie-at position (g. 18, c).
Re-install the back panel (g. 14, no. 2 + 3).
6. Using with the carrycot
6.1 Assembling the carrycot
Remove the apron and mattress to gain access to the stay bars in the
bottom of the carrycot. Using the tabs, pull the stay bars into the clips
on the baseboard until you hear them click into place (g. 24). Repo-
sition the lining by closing the zippers (g. 25) and place the mattress
back into the carrycot.
Important: Ensure that the stay bars are fully engaged before using
the carrycot.