KinAn XL1704 User manual

17” 4 port VGA KVM Switch
User Manual
Printing date: 2018/0 1
Version: V1.1

4 Port User Manual
- 1 -
Product Description
The KVM console integrates multiple ports KVM switches in a 1U height
console. It can control multiple computers with a set of device including
monitor, keyboard and mouse, thus saves much cost and space to separately
equip keyboard, mouse and monitor for every computer.
It is easy and fast to install the KVM console; you just need to connect
corresponding cables to the right ports of KVM and its module without
software configuration.
As many as 4 computers can be directly connected to the XL1704; it supports
multiple hardware platforms and multiple operating systems.
Product Features
17” TFT LCD monitor, high brightness, high resolution;
1U height, suitable height for standard 19”rack mount, metal structure;
Ultra slim 99 keys US keyboard with small numeric keyboard;
High resolution and high flexibility with touchpad; with two function
buttons and scroll wheel.
A single USB&PS2 console controls up to 4 computers
Multiplatform support-Windows2000/XP/Vista, Linux, Mac and Sun
USB or PS/2 keyboard emulation--computer boot even the console focus
is else where
Convenient computer switching via front panel pushbuttons and
hotkeys
Auto scan feature for monitoring user-selected computers
Hot pluggable --add or remove computers without having to power
down the switch

4 Port User Manual
- 2 -
Product Overview
Figure 1-1 front view
1. LCD monitor
2. Rear bracket
3. OSD controls
4. Front bracket
5. Keyboard
6. Touchpad
7. Handle
8. Release lock
9. Display panel
10. Switching LEDs
Figure 1-2
1. PC connection port: 4 ports
2. Power input (AC or DC)
3. Power switch
4. Ground connection screw
5. Console Port

4 Port User Manual
- 3 -
Installation
1. Make sure the KVM has been connected to the ground (1 in the diagram )
2. Connect the KVM with the computer according to 2 in the diagram
3. Connect power cable to KVM port as shown in 3 in the diagram
4. Turn on the power, the KVM start to work after power supply(4 in the
diagram)
Note: Connect to the external monitor according to 5 in the diagram if an
external console is needed.
Start to Use
1) Release the lock button.
Figure 1-4 unlock the KVM
*Note：The lock button can only do horizontal locking, it can’t bear any load.
2) Pull the LCD panel all the way out until it clicks into place.

4 Port User Manual
- 4 -
3) Open the LCD panel, the LCD display can be opened up to 108°.
Best Resolution :
1280x1024@60Hz
Figure 1-5 open angle of the console
4) Power on the KVM, the power LED will turn to green after power on.
5) Power on computer or server after power on KVM and you will see green
light at each port.
Pushbutton Operation Instructions
Figure 1-6 front view of the pushbuttons
Table 1-1 pushbuttons operation instruction
No.
Parts
Functions
1
1-4
Switch freely from port 1 to port 4
2
Port
Selection
Buttons&
LEDs
Indicator LEDs are built into the switches, the
online LED light is on the left and the selected LED
light is on the right.
1) An online LED light (green) indicates that the
KVM has connected to its corresponding
computer and power on.
2) A selected LED light (orange) indicates that the
computer attached to its corresponding port is up
and running.
3
Port ID
It shows the current selected port

4 Port User Manual
- 5 -
LCD OSD Configuration
The LCD OSD allows you to set up and configure the LCD display.
Buttons
Functions
MENU SELECT
Press this button invokes the menu function and
brings up the main menu.
EXIT/AUTO
Press this button exits the current menu and
returns to the previous menu or presses this
button exits the LCD OSD.
Press AUTO for automatic configuration.
SL-/SL+
Press this button moves your menu to make
corresponding adjustment.
LED state
Green :running
Red :power off or access non standard VESA signal
Flash green：energy saving mode or no signal
Table 1.2 LED OSD configuration instructions
Press AUTO if the screen migrates after power on or under other
circumstances, then the screen auto configure to its best display state.(It
might can’t be adjusted to its best state if part of the display mode is not
standard VESA mode, if so return back to OSD menu to RESET, then it will
back to normal.
We suggest our customers to set up the display mode at 1280x1024, refresh
rate at 60Hz.

4 Port User Manual
- 6 -
Hot Key Operations
Press 【L_Ctrl】key twice, you can use the hot keys after hearing a warning
sound.
Keyboard mode:
The keyboard will exit the hot key mode if no operation in 2 seconds.
See below hot keys operation instructions:
Press【L_Ctrl】key twice + function buttons
Function
Operation
Descriptions
Switching
port
+ 1~4
Switch from 1~4
E.g.: Press 【L_Ctrl】twice + 2 to
select the port 2 in the current level
+ ↑/↓
Skip to previous/next port
Auto scan
+ S
1. Auto Scan automatically scan ports
that attached PC or server. Users can
set the scan duration in OSD menu
and press any key to exit scanning
mode.
2. Move the mouse to extend scan
interval.
Table 1-3 hot key operation instructions
Note:
Only the large numbers keys on the keyboard are available when you select
the port while hot keys, the small numeric keyboard are unavailable.

4 Port User Manual
- 7 -
Specifications
Model
XL1704
Computer
Connections
Direct
4
Max
4
Port
Simulation
Keyboard, mouse
PS/2, USB
LCD monitor
LCD type
SXGA TFT
View area
17 "
Resolution
1280×1024@60Hz
Color Display
16.7 M
Brightness
250cd/m²（T y p ）
Contrast ratio
1000 : 1 （T y p ）
Pixel pitch (mm)
0.264(H) × 0.264(W)
Mouse
X/Y resolution
>1000 points /inch,( 40 points/mm )
Scroll ball
Support scroll ball functions
Keyboard
99 keys (82 keys main keyboard +17
independent small numeric keyboard)
Port selection
Pushbuttons, hot keys
Power input
100V- 240Vac , 50-60Hz , <1.5A
Power consumption
15W
Operating temperature
0-40 ℃
Store temperature
-20- 60 ℃
Humidity
0-80% RH, non condensing
Net weight
12kg
Product dimension (W × D × H)
448mm×481mm×42.5mm
Package dimension (W × D × H)
755mm×655mm×195mm
Min installation distance
455mm