KISANKRAFT KK-KPS-204 User manual

KisanKraftTM Warranty Certificate
(DEALER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Machine Tools Private Limited
: www.kisankraft.com : [email protected]om : +91.80. 22178200
Page 1 of 48
Product
Knapsack Power
Sprayer/
Portable Power Sprayer
KisanKraftTM
Invoice Date
Brand KisanKraft KisanKraftTM
Invoice No.
Model
KK-KPS-204
KK-KPS-804
KK-PPS-P764
WARRANTY
PERIOD 6-MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
EARLIER.
Dealer’s
Invoice Date Dealer’s
Invoice No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s Sign Dealer’s Sign
What is covered: KisanKraft Machine Tools Private Limited and its manufacturers
warrant this product to be free from defects in material or workmanship. All parts
defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Machine Tools Private
Limited or its manufacturers at the premises of Authorized Dealers, of such parts as
appear to KisanKraft or its manufacturers, upon inspection, to be defective in material
and/or workmanship. KisanKraft or its manufacturers make no warranty with respect to
trade accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers
assumes any responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine
or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage,
(6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper
set up, adjustments, tampering or altered products

KisanKraftTM Warranty Certificate
(DEALER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Machine Tools Private Limited
: www.kisankraft.com : [email protected]om : +91.80. 22178200
Page 2 of 48
Important: (1) Normal maintenance and adjustments to the product is the responsibility
of the customer. (2) Normal wear and tear is not covered under warranty
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell, spark-
plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under the warranty.
No Warranty On Electrical Motor / Electrical Parts Etc.
Incidental / Consequential Loss: KisanKraft Machine Tools Private Limited or its
manufacturers will not be liable for general damages, including bodily injuries, or for
incidental or consequential damages including, but not limited to, loss of use, loss of
profits, loss of production, expense of substitute equipment or other commercial loss or
damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranties hereunder,
including, but not limited to, any implied warranty of merchantability must be brought
within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Machine Tools Private Limited or any of its manufacturers has the authority
to increase or alter the obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended to
the first end user (original purchaser), and no warranty is made, nor authorized to be
made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of any
obligation under this warranty for failure during the applicable warranty period, deliver
the defective product, to the nearest Authorized Dealer. KisanKraft Machine Tools
Private Limited, its manufacturers and its dealers reserve the right to inspect the claimed
defective part(s) to determine if the malfunction is the result of a defect covered by this
warranty. Please note that the decision of KisanKraft Machine Tools Pvt Ltd with respect
to any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
ChainsawsBrush Cutters and AccessoriesHarvesters
Engines and Water PumpsHand ToolsGarden Tools
Cultivators and AccessoriesSprayers and Accessories
Transplanter and Post Hole Digger Milking Machines 

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com
: [email protected]om : +91.80. 22178200
Page 3 of 48
Operation Manual
KisanKraft Machine Tools Pvt. Ltd.
Sri Huchhanna Tower, #4,1st Main,7-A Cross, Maruthi Layout, Dasarahalli,
HAF Post, Hebbal, Bangalore 560024,Karnataka,INDIA
♦Bangalore (HO) ♦ Ahmedabad ♦ Bhopal ♦ Bhubaneswar ♦ Coimbatore ♦
♦Ernakulam ♦ Guwahati ♦ Patna ♦ Hinudpur ♦ Hubli ♦ Hyderabad ♦
♦Jaipur ♦ Karnal ♦ Kolkata ♦ Lucknow ♦ Nagpur ♦ Pune ♦ Raipur ♦ Shimla ♦

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com
: [email protected]om : +91.80. 22178200
Page 4 of 48

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com
: [email protected]om : +91.80. 22178200
Page 5 of 48
CONTENTS
BEFORE GETTING STARTED .......................................................... 8
SAFETY INSTRUCTIONS ................................................................ 8
OVERVIEW OF COMPONENTS ...................................................... 9
ASSEMBLY................................................................................. 10
OPERATING INSTRUCTIONS ....................................................... 10
MAINTENANCE AND STORAGE................................................... 16
TECHNICAL SPECIFICATIONS....................................................... 17
TROUBLESHOOTING .................................................................. 18
POWER SPRAYER- DIAGRAM...................................................... 20
POWER SPRAYER - PARTS-LIST ................................................... 21
PRESSURE PUMP PARTS - DIAGRAM........................................... 23
PRESSURE PUMP PARTS-LIST ..................................................... 24
OPERATION MANUAL-4 STROKE GASOLINE ENGINE ................... 26

KisanKraftTM
Warranty Certificate
(CUSTOMER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Machine Tools Private Limited
: www.kisankraft.com : [email protected]om : +91.80. 22178200
Page 6 of 48
Product
Knapsack Power
Sprayer/Portable
Power Sprayer
KisanKraftTM
Invoice
Date
Brand KisanKraft KisanKraftTM
Invoice No.
Model
KK-KPS-204
KK-KPS-804
KK-PPS-P764
WARRANTY
PERIOD 6-MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
EARLIER.
Dealer’s
Invoice Date Dealer’s
Invoice No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s
Sign Dealer’s Sign
What is covered: KisanKraft Machine Tools Private Limited and its manufacturers
warrant this product to be free from defects in material or workmanship. All parts
defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Machine Tools Private
Limited or its manufacturers at the premises of Authorized Dealers, of such parts as
appear to KisanKraft or its manufacturers, upon inspection, to be defective in material
and/or workmanship. KisanKraft or its manufacturers make no warranty with respect
to trade accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers
assumes any responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of
machine or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical
damage, (6) Repairs made by unauthorized parties and/or with unauthorized parts, (7)
Improper set up, adjustments, tampering or altered products

KisanKraftTM
Warranty Certificate
(CUSTOMER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Machine Tools Private Limited
: www.kisankraft.com : [email protected]om : +91.80. 22178200
Page 7 of 48
Important: (1) Normal maintenance and adjustments to the product is the
responsibility of the customer. (2) Normal wear and tear is not covered under warranty.
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell,
spark-plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under the
warranty.
No Warranty On Electrical Motor / Electrical Parts Etc.
Incidental / Consequential Loss: KisanKraft Machine Tools Private Limited or its
manufacturers will not be liable for general damages, including bodily injuries, or for
incidental or consequential damages including, but not limited to, loss of use, loss of
profits, loss of production, expense of substitute equipment or other commercial loss
or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranty hereunder,
including, but not limited to, any implied warranty of merchantability must be brought
within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Machine Tools Private Limited or any of its manufacturers has the authority
to increase or alter the obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended
to the first end user (original purchaser), and no warranty is made, nor authorized to
be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of
any obligation under this warranty for failure during the applicable warranty period,
deliver the defective product, to the nearest Authorized Dealer. KisanKraft Machine
Tools Private Limited, its manufacturers and its dealers reserve the right to inspect the
claimed defective part(s) to determine if the malfunction is the result of a defect
covered by this warranty. Please note that the decision of KisanKraft Machine Tools
Pvt Ltd with respect to any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
ChainsawsBrush Cutters and AccessoriesHarvesters
Engines and Water PumpsHand ToolsGarden Tools
Cultivators and AccessoriesSprayers and Accessories
Transplanter and Post Hole Digger Milking Machines

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 8 of 48
BEFORE GETTING STARTED
Please read and follow the instructions in this manual before using the machine. The user
should be familiar with the safety notices, machine performance, and maintenance, etc. The
operation manual will be used later in case of any repair, accessories replacement, and
accessories procurement, so preserve it carefully.
SAFETY INSTRUCTIONS
1. Using this machine with extra high pressure is prohibited (≤35kgf/cm2) ；
2. The rotating parts should have a safety protective device;
3. Protective Clothing:
Wear flange cap.
Wear dirt/fog-proof glasses.
Wear gauze mask.
Wear long gloves.
Wear coat guarding against
poisons.
Wear boots.
4. Spraying towards personnel and working at the downwind position are prohibited;
5. Running the machine without water or lubricating oil is prohibited;
6. Using special working solutions as strong acid, strong alkali, etc. is prohibited
7. Following personnel should not use the machine:
Mentally challenged.
Drunk.
Under the age of 18 or older people.
Person with no knowledge of the machine.
Tired person or patient and others who cannot operate the machine
normally.
A person who has just exercised strenuously or has not slept enough.
Women feeding breast milk to the baby or is pregnant.
8. . Spraying
It is fine to carry out an operation during cool weather with little wind.
For example, early in the mornings or in the late afternoons as this can
reduce the evaporation and drift of chemicals and improve the
protective effect.
The operator should move windward.
If your mouth or eyes are spattered with chemicals, wash them with
clean water and then visit a doctor.
If the operator has a headache or dizziness, should stop working at
once and consult a doctor immediately.

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 9 of 48
For the operator’s safety, misting/dusting must be carried out strictly
according to the instruction of the chemicals and agricultural
requirements.
Spray over, according to pesticide manual to clean out any residual
spray mixture in chemical tank.
After spraying always wash your hands and face thoroughly
OVERVIEW OF COMPONENTS
KK-KPS-204 / 804:

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 10 of 48
KK- P764:
ASSEMBLY
KK-KPS-204 / 804:
Attach the wide nozzle, the nozzle pipe,
the bail cock in an order to the spray hose,
and connect the other end of the hose to
the spray outlet.
OPERATING INSTRUCTIONS
Pre-Operation Preparation:
Oiling
1.
Make sure that the engine is
stopped and cooled.
2. Neither overfill nor spill the fuel
on the engine
Dilution of chemicals/Charging the chemical tank (Applicable for
KK-KPS-204 / 804)
Caution: Agricultural chemicals are extremely dangerous, and must be handled with utmost
care. Read the manual for the specific chemical carefully before use.

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 11 of 48
Dissolve water dispersible powder in a separate container before filling, be sure not to get
foreign material into chemicals.
Always fill the chemical tank through the strainer so that contaminants are not mixed into
the chemicals.
Open the air bleed nozzle, and bleed until the chemical is draining out, and then close the
nozzle securely .Before spraying the agrochemical, be sure to put on suitable protective
clothing to protect yourself against contact with and breathing it. Observe the following
cautions for safe operation:
a) Be sure to close the chemical tank cover securely.
b) Check the spray hose and nozzle connections to make sure there are no leakage.
c) Always stop the engine before refilling the fuel tank or changing the nozzle.
d) When carrying a full chemical tank, be careful not to lose your balance.
Starting the Engine (Applicable for both the models):
Important: When starting the engine, be sure to fill the chemical tank with pure water or
chemical liquid. Never run the engine when the chemical tank is empty.
1. Pump the primer bulb until fuel can be seen flowing through the fuel return line,
and pull the choke lever to full close.(During hot weather and when the engine is
already warmed up, the choke lever may be set to either half open or full open ).
2. Set the throttle lever to the middle speed position (not necessarily to maximum).

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 12 of 48
KK-KPS-204 / 804:
Matching mark at
Starting
KK-P764:
3. Pull the recoil starter lightly 2-3 times.
4. Pull the recoil starter strongly to start the engine.
5. If the engine stops after a few revolutions, set the choke to half open, and pull the
recoil starter rope strongly again to restart it.
Note: If the engine does not catch even after the starter is pulled several times,
set the choke lever to full open and pull the starter rope. Be sure not to pull the
starter lever completely out. After the engine starts, open the choke lever slowly,
move the throttle lever to the low –speed side, and let the sprayer warm up for 2-
3 minutes.
Pull briskly:

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 13 of 48
Operation (KK-KPS-204 / 804):
1.
Turn the handle of the
control valve, and set it to
the position for HERBICIDE,
INSECTICIDE
or HIGH
PRESSURE to match the
pressure of the operating
conditions.
2. Check the spraying
conditions and the status of
the equipment, then
shoulder the equipment and
set the throttle lever to the
high speed position.
3. When the nozzle cock is opened, chemicals will be atomized as they come out
of the nozzle.
IMPORTANT
1. When the pressure control valve is changed to INSECTICIDE or HERBICIDE,
with the throttle being fully open at HIGH PRESSURE positon of pressure control
valve handle, the engine speed will become too high, corresponding to the extent
of lowered pressure. Therefore, use the equipment with the throttle lever
somewhat turned back from the fully opened condition, when the equipment is
used at the position for INSECTICIDE or HERBICIDE.
2. Be careful of the amount of fuel in the tank, and refill it when it becomes low.
To Stop:
Temporary halt during operation:
1. Close the spray gun, and return the throttle lever to low speed.
2. Press the engine stop button.
3. After the engine stops, set the sprayer down and close the fuel cock.

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 14 of 48
Stopping the sprayer after completing spraying:
1. Remove the chemical tank drain cap, drain off all of the chemical
2. Fill the chemical tank with clean water, operate the engine, and clean the pump
and hose interior by spraying the clean water. Drain off the remaining water
through the drain.
Start the engine at just less than high speed for 15-20 seconds to spray out the water in the
spray hose and nozzle. When water stops coming from the nozzle, turn off the engine at
once.
Operation (KK-P764):
1. Turn the handle of the control valve
to match the pressure of operating
conditions.
2. Check spraying conditions and the
status of the equipment, and set
the throttle lever to the high speed
position.
3. When the nozzle cock is opened, chemicals will be atomized as they come out
of the nozzle.

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 15 of 48
IMPORTANT
1. After each 4 continuous working hours, please turn the cap of grease cup for 1 or
2 rounds. This will lubricate the piston and prolong its life.
2. After every 100 working hours, please inspect the engine oil level in the pressure
pump(you can see it from the oil window of the pump).In case, the oil level is
lower than1/3 position, please remove the oil inlet bolt and add engine oil up to
2/3 position
3. Be careful of the amount of fuel in the tank, and refill it when it becomes low.
To Stop:
Temporary halt during operation:
1. Close the spray gun, and return the throttle lever to low speed.
2. Press the engine stop button.
3. After the engine stops, close the fuel cock.
Stopping the sprayer after completing spraying:
1. Drain off all of the chemical from the chemical tank.
2. Fill the chemical tank with clean water, operate the engine, and clean the pump
and hose interior by spraying the clean water.
Start the engine at just less than high speed for 15-20 seconds to spray out the
water in the spray hose and nozzle. When water stops coming from the nozzle,
turn off the engine at once.

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 16 of 48
MAINTENANCE AND STORAGE
(Applicable for both the models)
Cleaning the air cleaner:
Plug:
Storage:
After using the sprayer for the season, store it until the next season of use as follows:
1. Drain off all fuel from the fuel tank and the carburetor.
2. Remove the spark plug and coat the cylinder with a small amount of oil. Pull
the recoil starter lightly 2-3 times to spread the oil over the cylinder completely
as shown in the figure below.

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 17 of 48
3. Pull the recoil starter out slightly and stop it in place where you feel the pull
start (compression starts).
4. Clean the entire sprayer completely, cover it so it does not accumulate dirt
and dust, and store it in a dry, cool location.
TECHNICAL SPECIFICATIONS
Model KK-KPS-204 KK-KPS-804 KK-P764
HP 1hp
CC 26 cc
Engine Type 4 - stroke
RPM/Output
Pressure
1800 (Pump RPM)/ 20-35bar
Fuel Used Petrol
Fuel Tank Capacity 900 ml (Petrol) 600 ml (Petrol)
Chemical tank
capacity(L) 20 25 N/A
Oil (Mixing) For Engine 100 ml (20w 40 Grade)
Weight of the
Machine
9 9.5kg 9 kg
Consumption/Out
Put Capacity
500-600 ml/hour (Engine) & 420 Litre/hour (Output)
Accessories 3 feet gun,3 Hole
Lance
3 feet gun,3 Hole
Lance,1m hose
1 feet gun,25/50 m
hose

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 18 of 48
TROUBLESHOOTING
Pump:
Trouble Cause Remedy
No Suction
Hose is Loose
Tighten the hose carefully
Suction hose is clogged with
chemicals.
Disassemble and clean the
hose.
Worn piston packing.
Replace with a new piston
Foreign object in valve parts.
Disassemble and clean the
valve.
Poor spray quality
Worn piston packing
Replace with a new piston
Flaw in cylinder inner surface
Replace with a new cylinder
Flaw in exhaust valve
Replace with a new valve
Worn pressure control valve
handle
Replace with a new handle
Foreign object in valve parts
Replace with a new
Worn nozzle hole.
Replace with a new nozzle.
Too many nozzle attached
Reduce number of nozzles or
replace with nozzle of smaller
holes.
When engine fails to start:
Trouble Cause Remedy
There is fuel, but
spark plugs fail
to ignite.
There is power
at the terminal.
Drawing too much fuel
Tuning the carburetor
Faulty spark plug gap.
Adjust the spark plug
gap
Faulty spark plug
insulation.
Replace the spark
plug
No power at
the terminal
Faulty TCI unit or broken
wire
Replace the ignition
coil.
A break or short in the
ignition coil.
There is fuel and
spark plug
ignites
Compression
is good
Bad Mixture Adjust the carburetor
Compression
is bad
Faulty packing
Tighten the spark
plug
Spark plugs not tightened
properly
Tighten the spark
plug
Piston rings are sticking
Replace the piston
ring
No
fuel in the
carburetor
No fuel in the tank
Fill the tank with fuel
Fuel valve is faulty or fuel
tank air vent is plugged.
Clear air vent hole
Lines are bent
Replace lines

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 19 of 48
Engine fails to run smooth:
Trouble Cause Remedy
No power
Compression is
good and there
is no misfire
Air cleaner element is
plugged up.
Clean or replace air
cleaner if necessary
Air has entered fuel line
joints.
Clear the fuel line
Faulty choke lever
Replace choke lever
Carbon build up on
cylinder muffler.
Clean the muffler
Compression is
bad
Burnt spark plugs
Replace the spark plug
Short in cable
Replace the cable
Bad mixture or piston ring
wear.
Replace the piston ring
Marks on cylinder. Cracks
in the piston head
Replace the piston
Engine overheated
Fuel is too low (mixture is
too thin).
Engine over oiling.
Faulty mixture, not
enough mixture.
Clear the lines
Carbon piled up,
overloaded operation.
Clean the carbon
Faulty spark plugs.
Replace the spark plugs
Plugged cylinder or
coolant lines
Clean the coolant lines
Inaccurate explosion
Carburetor not adjusted
properly.
Adjust the carburetor
gap properly
Faulty spark plugs.
Replace the spark plug
Faulty magneto or internal
short
Replace he magnet
Engine doesn’t sound right
Overheated cylinders
Replace the cylinder
Overload operation
Right quantities of petrol
and oil should be mixed
to enable proper
lubrication
Faulty mixture or incorrect
ratio
Internal engine damage
Replace the necessary
spares/contact service
person
Slow acceleration
Carburetor not adjusted
properly or faulty
compression
Adjust the carburetor
gap properly
Poor gasoline oil quality
Use good quality
gasoline-oil mixture.
Carbon pile up
Clean the carbon

KisanKraftTM
Knapsack Power Sprayer
KK-KPS-204/804
Portable Power Sprayer
KK-P764
: www.kisankraft.com : [email protected] : +91.80. 22178200
Page 20 of 48
POWER SPRAYER-DIAGRAM