KitchenAid KSM1CB User manual

KSM1CB
INSTRUCTIONS
INSTRUCTIONS
INSTRUCCIONES
W10719715A_ENv14.indd 1 11/6/14 9:43 AM

2
PRECISE HEAT MIXING BOWL INSTRUCTIONS
PROOF OF PURCHASE & PRODUCT REGISTRATIONPROOF OF PURCHASE & PRODUCT REGISTRATION
USA: 1.800.541.6390
Canada: 1.800.807.6777
WELCOME TO THE WORLD OF KITCHENAID.
We’re committed to helping you
create a lifetime of delicious meals for
family and friends. To help ensure the
longevity and performance of your
appliance, keep this guide handy. It will
empower you with the best way to
use and care for your product. Your
satisfaction is our #1 goal. Remember
to register your product online at
www.kitchenaid.com, or by
mail using the enclosed
Product Registration Card.
KitchenAid.com
KitchenAid.ca
Join us in the kitchen at www.kitchenaid.com.
W10719715A_ENv14.indd 2 11/6/14 9:43 AM

English
3
PRECISE HEAT MIXING BOWL SAFETY
Important safeguards...........................................................................................4
Electrical requirements .......................................................................................5
PARTS AND FEATURES
Parts and accessories...........................................................................................6
Control panel display...........................................................................................7
ASSEMBLING THE PRECISE HEAT MIXING BOWL
 Beforerstuse ....................................................................................................8
Attaching the Precise Heat Mixing Bowl to Stand Mixer.....................................8
USING THE PRECISE HEAT MIXING BOWL
Connecting the Precise Heat Mixing Bowl........................................................10
Programming the manual mode........................................................................10
Using the temper mode ....................................................................................12
Using the sleep mode........................................................................................13
Removing the Precise Heat Mixing Bowl from the Stand Mixer .......................14
TIPS FOR GREAT RESULTS
Temperature guide for chocolate recipes..........................................................15
Temperature guide for other recipes ................................................................15
CARE AND CLEANING
Cleaning the Precise Heat Mixing Bowl base ....................................................16
Cleaning the stainless steel bowl, lid, and accessories.......................................16
TROUBLESHOOTING ..........................................................................................17
WARRANTY AND SERVICE................................................................................18
PRECISE HEAT MIXING BOWL INSTRUCTIONS
TABLE OF CONTENTS
PROOF OF PURCHASE & PRODUCT REGISTRATIONPROOF OF PURCHASE & PRODUCT REGISTRATION
Model Number _______________________________________________________________________
Serial Number _______________________________________________________________________
Date Purchased ______________________________________________________________________
Store Name _________________________________________________________________________
Always keep a copy of the itemized sales receipt showing the date of purchase of your
Precise Heat Mixing Bowl. Proof of purchase will assure you of in-warranty service. Before
youuseyourPreciseHeatMixingBowl,pleaselloutandmailyourproductregistration
card packed with the unit, or register on-line at www.kitchenaid.com. This card will enable
ustocontactyouintheunlikelyeventofaproductsafetynoticationandassistusin
complying with the provisions of the Consumer Product Safety Act. This card does not
verify your warranty. Please complete the following for your personal records:
W10719715A_ENv14.indd 3 11/6/14 9:43 AM

4
PRECISE HEAT MIXING BOWL SAFETYPRECISE HEAT MIXING BOWL SAFETY
You can be killed or seriously injured
if you don't immediately follow
instructions.
You can be killed or seriously injured
if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce
the chance of injury, and tell you what can happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you
and others.
All safety messages will follow the safety alert symbol and either the
word “DANGER” or “WARNING.” These words mean:
DANGER
WARNING
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed, including the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against risk of electrical shock, do not put Precise Heat Mixing Bowl
base in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug from the outlet when not in use, before putting on or taking off parts,
and before cleaning.
6. Do not operate any appliance with a damaged cord or plug, or after the
appliance malfunctions, or is dropped or damaged in any manner. Return
appliance to the nearest Authorized Service Facility for examination, repair,
or electrical or mechanical adjustment.
7. The use of attachments not recommended or sold by KitchenAid may cause
re, electric shock, or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
W10719715A_ENv14.indd 4 11/6/14 9:43 AM

English
5
PRECISE HEAT MIXING BOWL SAFETYPRECISE HEAT MIXING BOWL SAFETY
Volts: 120 VAC
Hertz: 60 Hz
NOTE: This Precise Heat Mixing Bowl
is equipped with a polarized plug (one
blade is wider than the other). To reduce
the risk of electrical shock, this plug will
fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. Do not
modify the plug in any way.
Do not use an extension cord. If the
power supply cord is too short, have
a qualified electrician or serviceman
install an outlet near the appliance.
Electrical requirements
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving an appliance containing hot oil
or other hot liquids.
12. This appliance is not intended for use with oil.
13. If LED indicator lights are ashing during or after cooking cycle, the Precise
Heat Mixing Bowl may have lost power during the cooking cycle. Check food
to be sure it is cooked to an internal temperature of at least 165°F (74°C).
14. Always attach plug to appliance rst, then plug cord into the wall outlet.
To disconnect, turn any control to “off,” then remove plug from wall outlet.
15. Do not use appliance for other than intended use.
SAVE THESE INSTRUCTIONS
W10719715A_ENv14.indd 5 11/6/14 9:43 AM

6
PARTS AND FEATURESPARTS AND FEATURES
Lid
Parts and accessories
Stainless
steel bowl
liner
Bowl
base
Power
cord
(not shown)
Digital
display with
timer
“Max ll”
line
Handles Control
panel
W10719715A_ENv14.indd 6 11/6/14 9:43 AM

English
7
Preheating In Temper
PARTS AND FEATURESPARTS AND FEATURES
Control panel display
Temperature / Time
selection toggle button
Start/Cancel
button
Digital display
Manual/Chocolate mode
button
Preheating/Temper mode
indicator
Time indicator
Temperature indicator
Manual mode indicator
Chocolate mode indicator
Flex edge
beater
Dough hook Wire whisk
W10719715A_ENv14.indd 7 11/6/14 9:43 AM

8
ASSEMBLING THE PRECISE HEAT MIXING BOWLASSEMBLING THE PRECISE HEAT MIXING BOWL
Before rst use
Attaching the Precise Heat Mixing Bowl to Stand Mixer
Bowl-Lift Stand Mixer
3Fit the handles on the Stand Mixer bowl
support arms, and press down on the
back of the Precise Heat Mixing Bowl
to snap it into the bowl-lift.
2Place the bowl-lift lever on the Stand
Mixer in the down position.
1Be sure the Stand Mixer’s speed control
is OFF and Stand Mixer and Precise Heat
Mixing Bowl are both unplugged.
Before using your Precise Heat Mixing Bowl
for the first time, wash the stainless steel
bowl liner, lid, and stir accessory, soapy
water, then rinse with clean water and dry.
Do not use abrasive cleaners or scouring
pads.
NOTE: These parts can also be washed
in the top rack of the dishwasher.
4If desired, attach the appropriate
accessory for your recipe. Then rotate
the Stand Mixer bowl-lift lever back in
the up position.
The Precise Heat Mixing Bowl can either be used by itself, or attached to a KitchenAid®
Stand Mixer with the lid removed. Before attaching the Precise Heat Mixing Bowl to a
Stand Mixer decide how to attach it by determining which model Stand Mixer you have.
Use the handles to attach the Precise Heat Mixing Bowl to the Stand Mixer.
The Precise Heat Mixing Bowl can either be
used by itself, or attached to a KitchenAid®
Stand Mixer with the lid removed. When
using the Precise Heat Mixing Bowl alone,
see the “Using the Precise Heat Mixing
Bowl” section.
NOTE: When using the Precise Heat
Mixing Bowl by itself, place it on a flat,
level surface.
W10719715A_ENv14.indd 8 11/6/14 9:43 AM

English
9
ASSEMBLING THE PRECISE HEAT MIXING BOWLASSEMBLING THE PRECISE HEAT MIXING BOWL
Tilt-Head Stand Mixer
3Place the Precise Heat Mixing Bowl on
the clamping plate, and attach by turning
gently in a clockwise direction.
4If desired, attach the appropriate
accessory for your recipe.
5Place the Stand Mixer motor head back
in the down position and lock into place.
2Tilt the Stand Mixer motor head back. 1Be sure the Stand Mixer’s speed control
is OFF and Stand Mixer and Precise Heat
Mixing Bowl are both unplugged.
Use the attachment ring to the bowl clamping plate to attach the Precise Heat Mixing Bowl
to the Stand Mixer.
W10719715A_ENv14.indd 9 11/6/14 9:43 AM

10
USING THE PRECISE HEAT MIXING BOWLUSING THE PRECISE HEAT MIXING BOWL
Preheating In Te mper
2While the temperature flashes, turn the
TEMPERATURE/TIME selection toggle
button to set your desired temperature.
Programming the manual mode
Preheating In Te mper
1To program the time and temperature
on your Precise Heat Mixing Bowl, press
the MANUAL/CHOCOLATE mode
button once. The Manual indicator
and the temperature will flash.
1Plug in the Stand Mixer and the Precise
Heat Mixing Bowl.
Connecting the Precise Heat Mixing Bowl
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
WARNING
W10719715A_ENv14.indd 10 11/6/14 9:43 AM