KitchenAid KSM7581BZ User manual

Batidora con base
INSTRUCTIONS
Stand Mixer
INSTRUCTIONS
Batidora con base
INSTRUCCIONES
W10410027A_.indd 1 12/15/11 11:40 AM

USA: 1.800.541.6390
Canada: 1.800.807.6777
KitchenAid.com
KitchenAid.ca
Welcome to the world of KitchenAid® .
2
We’re committed to helping you
create a lifetime of delicious meals for
family and friends. To help ensure the
longevity and performance of your
appliance, keep this guide handy.
It will empower you with the best way
to use and care for your product. Your
satisfaction is our #1 goal. Remember
to register your product online at
www.kitchenaid.com, or by
mail using the attached
Product Registration Card.
W10410027A_.indd 2 12/15/11 11:40 AM

English
Find recipes and more at
www.kitchenaid.com
Table of Contents
STAND MIXER SAFETY
Important Safeguards.......................................................................................................4
Electrical Requirements ...................................................................................................5
PARTS AND FEATURES ......................................................................................................6
SETTING UP YOUR STAND MIXER.................................................................................7
USING YOUR STAND MIXER
Speed Control Guide - 10 Speed Stand Mixers ...............................................................9
ATTACHMENTS AND ACCESSORIES............................................................................10
CARE AND CLEANING......................................................................................................10
TIPS FOR GREAT RESULTS
Mixing Time ...................................................................................................................11
Mixer Use.......................................................................................................................11
Whipping Tips for Egg Whites........................................................................................12
Whipping Tips for Whipped Cream...............................................................................12
Bread Making Tips .........................................................................................................13
WARRANTY.........................................................................................................................14
3
W10410027A_.indd 3 12/15/11 11:40 AM

4
Stand Mixer Safety
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instructions.
2. To avoid risk of electrical shock, do not put Stand Mixer in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug Stand Mixer from outlet when not in use, before putting on or taking
off parts, and before cleaning.
5. Avoid contacting moving parts. Keep hands, hair, and clothing, as well as spatulas
and other utensils away from beater during operation to reduce the risk of injury
to persons and/or damage to the Stand Mixer.
6. Do not operate Stand Mixer with a damaged cord or plug or after the Stand
Mixer malfunctions, or is dropped or damaged in any manner. Call the KitchenAid®
Customer Satisfaction Center at 1-800-541-6390 for more information.
7. The use of attachments not recommended or sold by KitchenAid may cause re,
electrical shock, or injury.
8. Do not use the Stand Mixer outdoors.
9. Do not let the cord hang over edge of table or counter.
10. Remove Flat Beater, Stainless Steel Whip, or Spiral Dough Hook from Stand Mixer
before washing.
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS DESIGNED FOR HOUSEHOLD
USE ONLY.
W10410027A_.indd 4 12/15/11 11:40 AM

5
English
Stand Mixer Safety
Volts: 120 A.C.
Hertz: 60 Hz
NOTE: The power rating for your Stand
Mixer is printed on the serial plate.
Do not use an extension cord. If the power
supply cord is too short, have a qualied
electrician or serviceman install an outlet
near the appliance.
The maximum rating is based on the
attachment that draws the greatest load
(power). Other recommended attachments
may draw signicantly less power.
Electrical Requirements
Proof of Purchase & Product Registration
Always keep a copy of the itemized sales receipt showing the date of purchase of your
Stand Mixer. Proof of purchase will assure you of in-warranty service. Before you use
your Stand Mixer, please ll out and mail your product registration card packed with
the unit. This card will enable us to contact you in the unlikely event of a product safety
notication and assist us in complying with the provisions of the Consumer Product
Safety Act. This card does not verify your warranty. Please complete the following
for your personal records:
Model Number ________________________________________________________
Serial Number ________________________________________________________
Date Purchased _______________________________________________________
Store Name __________________________________________________________
W10410027A_.indd 5 12/15/11 11:40 AM

6
Parts and Features
Speed Control
Lever
Bowl Lift Lever
(not shown)
Beater Shaft
Stainless Steel
Whip
Stainless
Steel Bowl
Spiral Dough
Hook
Flat Beater
Locating Pins
Bowl Support
Beater Height
Adjustment
Screw
Motor Head
Bowl Handle (style may
vary depending on model)
Attachment Hub
(see the “Attachments
and Accessories” section)
Attachment
Knob
Pouring Shield
(available on some models)
W10410027A_.indd 6 12/15/11 11:40 AM

7
English
Setting up your Stand Mixer
Getting Started with your new Bowl-Lift Stand Mixer
IMPORTANT SET-UP INFORMATION:
For best performance, please go through these quick steps before using your Stand Mixer
Fig. 1
Locating Pin
Spring Latch
Pin
Fig. 2
Fig. 3
Step 1: Make sure Stand Mixer is turned to the OFF position and is unplugged.
Step 2: Attach the Stainless Steel Bowl to the Stand Mixer. Fit
Bowl Supports over Locating Pins and press down on back of the bowl until
Bowl Pin snaps into Spring Latch. (Fig. 1).
IMPORTANT: If bowl is not securely snapped into place, it will be unstable
and wobble during use.
Step 3: Attach Flat Beater. Slip Flat Beater onto the Shaft. Turn left,
hooking beater over the Pin. (Fig. 2)
Step 4: Raise Bowl to mixing position. Rotate Bowl Lift Lever
counterclockwise to the straight up position. (Fig. 3) The bowl must always
be in the raised position when mixing.
W10410027A_.indd 7 12/15/11 11:40 AM

8
Setting up your Stand Mixer
Raise Bowl
Fig. 4
Lower Bowl
IMPORTANT: The Stand Mixer may become warm during use. Under heavy loads with extended mixing time
periods, you may not be able to comfortably touch the top of the Stand Mixer. This is normal. The Stand Mixer
motor may emit a pungent odor during initial operation. This is common with electric motors.
Step 5: Test Beater to Bowl Clearance. Check the proximity of the Flat Beater to the bowl. The
beater should just clear the bottom of the bowl but should not touch it. Plug Stand Mixer in. Turn Stand Mixer
ON and test each speed making sure the beater does not touch the bowl during operation. If the beater is too
far away from the bottom, or is hitting the bowl, proceed to step 6 to make the necessary adjustments.
Step 6: Adjusting your Beater to Bowl Clearance. Unplug Stand
Mixer. Lower the bowl to the down position. Adjust the Beater Height
Adjustment Screw to lower or raise the bowl, (Fig 4). Repeat Steps 2-5
with the Stainless Steel Whip and Spiral Dough Hook.
Congratulations! Your Stand Mixer is now set up and ready for use.
W10410027A_.indd 8 12/15/11 11:40 AM

9
English
Using your Stand Mixer
Speed Control Guide -
10 Speed Stand Mixers
All speeds have the Soft Start®feature that
automatically starts the Stand Mixer at a
lower speed to help avoid ingredient splash-
out and “our puff” at start-up, then quickly
increases to the selected speed for optimal
performance.
Speed Used for Attachment Description
Stir Stirring For slow stirring, combining, mashing,
starting all mixing procedures. Use to
add our and dry ingredients to batter,
and add liquids to dry ingredients. Do
not use STIR speed to mix or knead
yeast doughs.
2 Slow Mixing, For slow mixing, mashing, faster stirring.
Kneading Use to mix and knead yeast doughs,
heavy batters, and candies; start mashing
potatoes or other vegetables; cut
shortening into our; mix thin or splashy
batters.
4 Mixing, For mixing semi-heavy batters, such as
Beating cookies. Use to combine sugar and
shortening and to add sugar to egg
whites for meringues. Medium speed for
cake mixes. Use with: Food Grinder,
Rotor Slicer/Shredder, Pasta Roller, and
Fruit/Vegetable Strainer.
6 Beating, For medium-fast beating (creaming) or
Creaming whipping. Use to nish mixing cake,
doughnut, and other batters. High speed
for cake mixes.
8-10 Fast Beating, For whipping cream, egg whites, and
Fast Whipping, boiled frostings. For whipping small
Whipping amounts of cream, egg whites or for
nal whipping of mashed potatoes.
NOTE: Use Speed 2 to mix
or knead yeast doughs. Use of
any other speed creates high
potential for Stand Mixer failure.
The PowerKnead™ Spiral Dough
Hook efciently kneads most
yeast dough within 4 minutes.
6-6.5 Quart
(5.67-6.15 L) 5-5.5 Quart (4.73-5.20 L)
Flour
Bread
Cookies
Mashed
Potatoes
13-14 cups
8 1/4loaves
13 dozen
8 lbs
10-12 cups
6 loaves
9 dozen
6 1/2lbs
Capacity Chart
W10410027A_.indd 9 12/15/11 11:40 AM

10
Attachments and Accessories
General Information
KitchenAid®Attachments are designed to assure long life. The Attachment Power Shaft
and Hub Socket are of a square design, to eliminate any possibility of slipping during the
transmission of power to the attachment. The hub and shaft housings are tapered to assure
a snug t, even after prolonged use and wear. KitchenAid®Attachments require no extra
power unit to operate them; the power unit is built-in.
Hinged Hub Cover
Attachment
Knob
Attachment Housing
Attachment Shaft Housing
Pin
Notch
Attachment
Hub Socket
Attachment Power Shaft
The Stainless Steel Bowl, Coated Metal
Flat Beater, Stainless Steel Wire Whip, and
Coated Metal Spiral Dough Hook may be
washed in an automatic dishwasher. Or,
clean them thoroughly in hot sudsy water
and rinse completely before drying. Do not
store beaters on shaft.
NOTE: Always be sure to unplug Stand
Mixer before cleaning. Wipe Stand Mixer
with a soft, damp cloth. Do not use
household/commercial cleaners. Do not
immerse in water. Wipe off Beater Shaft
frequently, removing any residue that may
accumulate.
Care and Cleaning
Accessories Burnished Metal Coated Metal Stainless Steel
White or silver
coated metal beaters
are dishwasher-safe.
(Available on most
models)
Not applicable
Not applicable All metal bowls are stainless
steel and dishwasher-safe.
(Available on all bowl-lift
models)
Not applicable
Burnished metal
beater and dough
hook should be
hand washed. May
discolor if used in
dishwasher.
All wire whips are stainless
steel and should be hand
washed only.
Not applicable
Not applicable
W10410027A_.indd 10 12/15/11 11:40 AM