Kleenmaid ICK66X Installation guide

IICCKK6666XX--
600 mm Induction Cooktop
IICCKK8800XX--
800 mm Induction Cooktop
IICCKK9900XX--
900 mm Induction Cooktop
Instructions for fitting and using your
induction
and
Warranty Details
The best you can own
Copie de 99636771_EN_A.qxd 20/05/05 09:34 Page 1

2
As part of our commitment to constantly improving our products, we reserve the right to make
changes to them based on technological advances to their technical, functional and/or aes-
thetic properties.
Attention
BBeeffoorreeiinnssttaalllliinnggaanndduussiinnggyyoouurraapppplliiaannccee,,pplleeaasseeccaarreeffuullllyyrreeaaddtthhiissGGuuiiddeettoo
IInnssttaallllaattiioonnaannddUUssee,,wwhhiicchhwwiillllaalllloowwyyoouuttooqquuiicckkllyyffaammiilliiaarriisseeyyoouurrsseellffwwiitthhiittssooppeerraattiioonn..
Young children should be supervised to ensure that they do not play with the appliance.
The appliance is not intended for use by young children or infirm person without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a simi-
larly qualified person in order to avoid hazard.
Congratulations on the purchase of your new appliance.
This appliance has been
designed and manufactured to give you years
of reliable performance.
For best results, carefully read the instructions on how to
install your new appliance. Correct installation will avoid
delays and unnecessary service calls.
Once installation is complete, read this booklet
carefully and get to know the controls and the
features of your new appliance.
We reserve the right to alter the specifications
with no influence on the operation of the
appliance.This instruction manual cannot be
reason for a claim.
Copie de 99636771_EN_A.qxd 20/05/05 09:34 Page 2

3
TABLE OF CONTENTS
• Safety Guidelines ____________________________________________________ 04
• Description of Your Appliance _________________________________________ 05
• Environmental Protection _____________________________________________ 05
1 / INSTALLING YOUR APPLIANCE
• Proper positioning ___________________________________________________ 06
• Building in __________________________________________________________ 06
• Hook-up ___________________________________________________________ 07
2 / USING YOUR APPLIANCE
• Description of the top _________________________________________________ 10
• Cookware for induction _______________________________________________ 11
• Which cooking zone should you use based on your cookware? _____________ 11
• Description of control panel ___________________________________________ 12
• Powering on ________________________________________________________ 12
• Adjusting the power _________________________________________________ 12
• Setting the timers ____________________________________________________ 12
• Using the "child safety device" _________________________________________ 12
• Safeties during operation _____________________________________________ 13
3 / DAILY CARE OF YOUR APPLIANCE
• Protecting your appliance _____________________________________________ 14
• Maintaining your appliance ____________________________________________ 14
4 / SPECIAL MESSAGES, DIFFICULTIES
• During initial use ____________________________________________________ 15
• When powering on ___________________________________________________ 15
• During operation ____________________________________________________ 15
5 / COOKING CHART
• Cooking chart for food types __________________________________________ 16
Copie de 99636771_EN_A.qxd 20/05/05 09:34 Page 3

4
SAFETY GUIDELINES
We have designed this cooking hob for use by
private persons in their homes.
These cooking hobs are meant to be used
exclusively for cooking beverages and food-
stuffs and do not contain any asbestos-based
materials.
••
Residual heat
A cooking zone can remain hot for several
minutes after use.
An ""HH""is displayed during this period.
Avoid touching the hot areas during this time.
••
Child safety device
Your hob is equipped with a child safety devi-
ce that locks its operation after use or during
cooking (See "Using the Child Safety Device"
section).
Do not forget to unlock it before using the
hob again.
••
For users of pacemakers and acti-
ve implants
The functioning of the hob conforms to cur-
rent electromagnetic interference standards
and thus is in total compliance with legal
requirements (89/336/CEE directives).
In order to avoid interference between your
cooking hob and a pacemaker, your pacema-
ker must be designed and programmed in
compliance with the regulations that apply to
it.
Consequently, we can only guarantee that our
own product is compliant.
With regard to the compliance of the pace-
maker or any potential incompatibility, you
can obtain information from the manufacturer
or your attending physician.
Electrical Danger
Ensure that the power cables of any
electrical appliances plugged in close to
the hob are not in contact with the cooking
zones.
If a crack appears in the glass worktop,
immediately disconnect your appliance to
avoid the risk of electric shock.
To do this, remove the fuses or use the cir-
cuit breaker.
Do not use your hob until you have repla-
ced the glass worktop.
••
Copie de 99636771_EN_A.qxd 20/05/05 09:34 Page 4

5
DESCRIPTION OF YOUR APPLIANCE
BCB
AAD
Air intake
Air outlet
Vitroceramic glass
Power cord
A
B
C
••
••
ENVIRONMENTAL PROTECTION
The packing materials can be recycled.
Dispose of them in containers provided for this purpose based on their individual recycling sym-
bols.
Used appliances should be disposed of in compliance with the regulations in effect in your place
of residence.
D
Copie de 99636771_EN_A.qxd 20/05/05 09:34 Page 5

6
11/ INSTALLING YOUR APPLIANCE
••
PROPER POSITIONING
Your appliance should be positioned so that
the plug-in unit is accessible.
The distance between the edge of your
appliance and the side and rear walls (or par-
titions) must be at least four centimetres (area
A).
Your appliance can be easily integrated above
a cabinet, an oven or a build-in-ready house-
hold appliance. You must simply ensure that
the air intakes and air outlets are clear (See
"Description of Your Appliance" section).
BUILD-IN
Follow the diagram above.
Glue the foam seal underneath your appliance
by following the outline of the worktop upon
which your appliance will rest. This will allow
you to achieve an airtight seal with the work-
top.
Attach the clips to the hob.
4 cm
4 cm
4 cm
4 cm
A
ventilation
space
Tip
If your oven is located below your
hob, the hob's thermal safety measures for-
bid the simultaneous use of the hob and the
pyrolysis program of your oven.
Your hob is equipped with an anti-overhea-
ting safety device.
This safety can be activated, for example,
when the hob is installed over an oven that
is not sufficiently insulated. If this occurs, a
series of small lines appear in the control
panel. In this case, we recommend that you
increase the ventilation of your hob by crea-
ting an opening in the side of your cabinet
(8 cm x 5 cm) and/or that you install the
oven insulation kit (reference 75X1652) that
is available from the Post-Sales Service
Department.
Warning
You must ensure that the air intakes
located under your cooking appliance
remain clear at all times.
For all types of installation, your induction
hob needs proper ventilation.
5522
••
6600//7799//9944
66..44
44995566//7755//9900
Copie de 99636771_EN_A.qxd 20/05/05 09:34 Page 6

7
INSTALLATION/VENTILATION
REQUIREMENTS
When installing an induction hob above an
underbench oven, cupboard or drawer unit,
the following ventilation requirements must
be observed:
• Heat Shield (heat resistent material, eg.
melamine timber veneer) is to be positioned
at least 50mm below hob.
• Cooktop must be isolated from under-
bench area. Heat Shield edges to be sealed
to surrounding surfaces
• A Vertical Division (heat resistent material,
eg. melamine timber veneer) is to be positio-
ned between the Heat Shield and the under-
side of the hob approximately 300mm from
back of cupboard. Length of Vertical Division
needs to be equal to
11/ INSTALLING YOUR APPLIANCE
••width of Heat Shield. Vertical Division must .t
tightly and act as a barrier to air .owing back
towards the cooling fan in hob (as per dia-
gram).
• Ventilation holes must be drilled into side
of adjoining cupboards to allow fresh air
supply to cooktop.
•When installing into a granite worktop, drill
holes below worktop (as per diagram).
Insulation kit as shown in owners manual is
not required when installation is carried out
according to these speci.cations (this is not
supplied by Kleenmaid).
WWAARRNNIINNGG::TThheeiinndduuccttiioonnccooookkttooppccaannnnoottbbee
iinnssttaalllleeddaabboovveeaaffrriiddggee,,ddiisshhwwaasshheerroorrwwaass--
hhiinnggmmaacchhiinnee..
IInnccoorrrreeccttiinnssttaallllaattiioonnoorrffaaiilluurreettooffoollllooww
iinnssttrruuccttiioonnssmmaayyrreessuullttiinnpprreemmaattuurreeffaaiilluurree
ooffccooookkttooppaannddwwiillllvvooiiddwwaarrrraannttyy..
300 mm
UNDERBENCH
AREA
Bottom Shelf
Kick Board
40 mm minimum Induction Hob Bench Top
Vertical Divider
Heat Shield
Drill 50 mm ventholes into
cabinet on both sides
aminated Worktop
4mm minimum
air outlet full
width of cooktop
Granite Worktop
Drill 5 mm vent
holes below the
worktop full
width of cooktop
OR
Induction cooktop
Granite Worktop
Underbench
50 mm
VENT HOLES
COOLING AIR FLOW
Air vents in hob to allow warm
air to be expelled from hob.
There must be a gap so air
flow is not restricted
COOLING FAN IN HOB
INDUCTION HOB
Vertical Divider - prevents air
flow cycle - ensures fresh
air enters cooling fan.
Copie de 99636771_EN_A.qxd 20/05/05 09:34 Page 7

90 cm Induction Hob Power Connection
(before April 2006)
23 March 2006

90 cm Induction Hob Power Connection
(after April 2006)
23 March 2006

90 cm Induction Hob Power Connection
(after April 2006)
23 March 2006