Knight Ergoplan Desk 1200 User manual

knightgroup.co.nz
Tools Required: Powered Screwdriver
Assembly Instructions
Ergoplan Desk 1200

Assembly Instructions
knightgroup.co.nz
Ergoplan Desk 1200
Recommended
2 Person Assembly
Thank you for purchasing Knight product, please carefully read the assembly instructions prior to installment to gain a complete
understanding of the product. It provides you with important information about the safety, use, installation and maintenance.
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS REGARDING
THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
SAFETY
• The product must be used in a safe manner. Inappropriate use may cause damage to the product and/or cause bodily harm to
the user or persons nearby.
• Don’t locate furniture in direct sunlight or near air-conditioning inlet or heating radiator.
• Don’t put high-temperature or frozen objects on furniture.
• Safely carry product to location of assembly.
• Retain this operation manual and pass it on to any future owner.
SET UP AND INSTALLATION
• Assemble the product according to the assembly instructions.
• To prevent possible scratches or damage, assemble the product on a soft surface such as a blanket, carpet or packaging.
• Place the product a safe distance from window frames, radiators, furniture etc. so that persons cannot become trapped.
It is recommended that this product is assembled by 2 people.
Any questions contact Knight on 0800 143 143
Due to continuous improvement of our products, our assembly instructions may not be in complete accordance with the product
and we apologise in advance.

Assembly Instructions
knightgroup.co.nz
Parts
Item Description Quantity
ATop Panel 1
XLeft Side Panel 1
ZRight Side Panel 1
DModesty Panel 1
The turning direction
of attaching
Incorrect Correct
A
X
Z
D
Ergoplan Desk 1200

Assembly Instructions
knightgroup.co.nz
Item Description Quantity
c1 6x35 Cam Bolt 10
d1 8x30 Dowel Pin 10
c2 Cam Sticker 10
b1 Bracket 4
s1 3.5x15 Screw 16
Parts
c1 6x35 Cam Bolt d1 8x30 Dowel Pin c2 Cam Sticker b1 Bracket s1 3.5x15 Screw
Cam
(pre-installed)
Ergoplan Desk 1200

Page 1
Assembly Instructions
knightgroup.co.nz
Step 1
Preparation for top panel A, left side panel X, right side panel Z and modesty panel D.
1. lnsert cam bolts (c1) into panels A, X and Z.
2. Insert dowel pins (d1) into panels X, Z and D.
Ergoplan Desk 1200
A
X
Z
D
c1
d1
d1
d1
d1
c1

Page 2
Assembly Instructions
knightgroup.co.nz
Page 2
Assembly Instructions
Step 2
Left side panel X, right side panel Z, and modesty panel D assembly.
1. Insert cam bolts (c1) on panels X and Z into cams on panel D and tighten in a clockwise direction.
2. Secure panel X & D and panel Z & D with bracket (b1) using screws (s1).
D
Z
X
s1
b1
Ergoplan Desk 1200

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Step 3
Top panel A assembly.
1. Insert cam bolts (c1) on panel A into cams on panels Z, D and X and tighten in a clockwise direction.
2. Cover top of cams with cam stickers (c2).
3. Turn desk over to upright position.
A
X
Z
D
c2
c2
c2
Ergoplan Desk 1200

Page 4
Assembly Instructions
knightgroup.co.nz
Complete
Ergoplan Desk 1200