Knight 600 User manual

knightgroup.co.nz
Assembly Instructions
Tools Required: N/A
Cubit Coffee Table 600

Page 1
Assembly Instructions
knightgroup.co.nz
Cubit Coffee Table 600
• To prevent possible scratches or damage, assemble the table upside
down on a soft surface such as a blanket, carpet or packaging.
Recommended
2-person Step
1 x Coffee Table Top
8 x 8*20 Screw 2 x 6*60 Screw 4mm Allen Key 5mm Allen Key
4 x Rails (2 rails not required in assembly)
2 x Legs

Page 2
Assembly Instructions
knightgroup.co.nz
Step 1
Step 2
Page 2
Assembly Instructions
Position rails on opposite sides of the top. Using the 4mm allen key and 6*60 screws fix rails to top - do NOT fully
tighten screws.
Place top upside down with screw holes facing up (only 2 of the 4 holes will be required in the assembly).
Cubit Coffee Table 600

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Step 4
Step 3
Fix legs to rails using 5mm allen key and 8*20 screws and tighten in clockwise direction. Make sure frame is square
on top and fully tighten rail screws.
Insert legs into opposite ends of the rails.
Cubit Coffee Table 600

Page 4
Assembly Instructions
knightgroup.co.nz
Page 4
Assembly Instructions
Completed
Cubit Coffee Table 600