Knight Velocity - Electric User manual

knightgroup.co.nz
Velocity - Electric
Tools Required: Power Drill
Assembly Instructions - Single Sided (SSD)

knightgroup.co.nz
Assembly InstructionsAssembly Instructions
Velocity - Electric SSD
Contents
Electric Single Sided Desk Page 1
Optional Cable Tray Page 15
Optional Studio50 or Active25 Screen Page 24
Electric Digital Handset Functions Page 32

knightgroup.co.nz
Assembly InstructionsAssembly Instructions
Velocity - Electric SSD
IMPORTANT!
Please carefully read the assembly manual and direction for use prior to
installment, use and maintenance of the table frame to gain a complete
understanding of its contents. It provides you with important information about
the safety, use, installation and maintenance of the table.
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY
AND OPERATION INSTRUCTIONS REGARDING THE USE OF THIS PRODUCT MAY
RESULT IN SERIOUS BODILY INJURY.
SAFETY
• The table must be used in a safe manner. Inappropriate use may cause
damage to the table and/or cause bodily harm to the user or persons nearby.
• Do not tamper with electrical components as this may lead to serious bodily
harm.
• Only connect the electric table frames to the prescribed mains power
voltage.
• Do not use the table frame to lift people.
• Please retain this operation manual and pass it on to any future owner.
USAGE
• The height-adjustable table is designed for use in dry work environments only.
• The table height is infinitely adjustable within its height range so that it can
be set to the user’s most ergonomic working height. The user should seek
professional help to establish their optimum working height.
• The table has been designed as a devise to elevate the users work surface
and associated office peripherals. Do not use the table frame for any other
purposes than that which it has been designed for. Any other use is at user’s
own risk!
• Do not crawl, lie or move around under the table frame, and do not sit or
stand on the table frame.
• CHILDREN should only use the table when supervised by adults.
• Liability: The manufacturer accepts under no circumstances warranty claims
or liability claims for damages arising from improper use or handling of the
table frame other than that described in this operation manual.
SET UP AND INSTALLATION
Assemble the table frame according to the following pages in this assembly
instructions guide.
• Place the table in a safe distance from window frames, radiators, furniture etc.
so that persons cannot become trapped.
• Level the table with the adjustable feet ensuring that the table is stable.
• Check that no cables can get jammed.
• Connect the table to the 110 or 230 VAC power outlet.
The table is now ready for use.
MAINTENANCE
• The table does not require any maintenance by the user
• The table is only to be cleaned with a wrung cloth.
• In the event of the occurrence of jarring sounds during operation, STOP using
the table and please contact the dealer.
TECHNICAL DATA
DESK
Height Range: 635-1285mm includes worktop
Speed: 30mm/s
Twin Motor
Weight Rating: 120kg
Input Voltage: 100-240V AC 50-60Hz
Output Voltage: 24V DC 2.0A
Duty Cycle: 10% 2min on 18min off

knightgroup.co.nz
Assembly Instructions
Page 1
Assembly Instructions
Velocity - Electric SSD
Parts
2 x Leg with motor2 x Frame Rails
1 x Handset1 x Power Cord
1 x L&R Support Bar (Pair)
1 x Power Box with Brackets 12 x ST5.0x23 2 x ST4.2x164 x M6x12 4 x M6x10
Socket Head
Bolt
8 x M8x20
2 x Foot with Leveling Feet

knightgroup.co.nz
Assembly Instructions
Page 2
Assembly Instructions
Velocity - Electric SSD
Step 1
Don’t plug in the desk
until handset, power box &
controller are mounted on
to the desk top.
It might cause errors.
Loosen and
pull apart

knightgroup.co.nz
Assembly Instructions
Page 3
Assembly Instructions
Velocity - Electric SSD
Step 2
4 x M6x10
Socket Head
Bolt

knightgroup.co.nz
Assembly Instructions
Page 4
Assembly Instructions
Step 3
Velocity - Electric SSD

knightgroup.co.nz
Assembly Instructions
Page 5
Assembly Instructions
Velocity - Electric SSD
Step 4
4 x M6x12

knightgroup.co.nz
Assembly Instructions
Page 6
Assembly Instructions
Velocity - Electric SSD
Step 5
8 x M8x20

knightgroup.co.nz
Assembly Instructions
Page 7
Assembly Instructions
Velocity - Electric SSD
Step 6
Worktop Length
1200mm 1125mm
1500mm 1425mm
1800mm 1725mm
Length

knightgroup.co.nz
Assembly Instructions
Page 8
Assembly Instructions
Velocity - Electric SSD
Step 7
Tighten

knightgroup.co.nz
Assembly Instructions
Page 9
Assembly Instructions
Velocity - Electric SSD
Step 8
12 x ST5.0x23

knightgroup.co.nz
Assembly Instructions
Page 10
Assembly Instructions
Velocity - Electric SSD
Step 9
Power Box Brackets
Clip brackets in place as shown,
no screws needed.

knightgroup.co.nz
Assembly Instructions
Page 11
Assembly Instructions
Velocity - Electric SSD
Step 10
Power Box
Slide the power box between
the brackets. Box will hold the
brackets in place.

knightgroup.co.nz
Assembly Instructions
Page 12
Assembly Instructions
Velocity - Electric SSD
Step 11
Plug in power cords as shown.

knightgroup.co.nz
Assembly Instructions
Page 13
Assembly Instructions
Velocity - Electric SSD
Step 12
Left-hand Location
Right-hand Location
2 x ST4.2x16

knightgroup.co.nz
Assembly Instructions
Page 14
Assembly Instructions
Velocity - Electric SSD
Completed

knightgroup.co.nz
Assembly Instructions
Page 15
Assembly Instructions
Optional SSD Cable Tray
Parts
4 x M6x10
Button Head
Screw
4 x M5x6 2 x SSD Tray Mounts 1 x SSD Tray
VSSDBRAC50
SSD Screen Brackets L/R Pair
Required if installing
Tray and Studio50.
VSSDBRAC25
SSD Screen Brackets L/R Pair
Required if installing
Tray and Active25.
VSSDBRACCT
SSD Cable Tray Brackets L/R Pair
Required if installing
Tray and NO Screen.

knightgroup.co.nz
Assembly Instructions
Page 16
Assembly Instructions
Step 1
Optional SSD Cable Tray

knightgroup.co.nz
Assembly Instructions
Page 17
Assembly Instructions
Step 2
Optional SSD Cable Tray
378
90.0°