Knight Eko Desk User manual

knightgroup.co.nz
Tools Required: Powered Screwdriver
Assembly Instructions
Eko Desk

Page 1
Assembly Instructions
knightgroup.co.nz
Eko Desk
• To prevent possible scratches or damage, assemble
the desk upside down on a soft surface such as a
blanket, carpet or packaging.
• Attach leg to the top assembly by using bolts, spring
washer, flat washer. Tighten using the allen wrench.
Recommended
2-person Step

Page 2
Assembly Instructions
knightgroup.co.nz
Step 1
Page 2
Assembly Instructions
Insert cam bolts (c1) into panels A, X and Z, then insert dowel pins (d1) into panels X, Z and D.
Eko Desk

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Insert cam bolts (c1) on panel A into cams on panels D, X and Z, then fully tighten. Cover the cam covers (c2) on
the top of all cams.
Step 3
Insert cam bolts (c1) on panels X and Z into cam on panel D and fully tighten. Then connect panel D and panel X/Z
by Bracket (b1) - please note power drill will be required.
Step 2
Eko Desk

Page 4
Assembly Instructions
knightgroup.co.nz
Page 4
Assembly Instructions
Complete
Eko Desk