Knight Cubit User manual

knightgroup.co.nz
Assembly Instructions
Tools Required: N/A
Cubit Planter Box

Page 1
Assembly Instructions
knightgroup.co.nz
Cubit Planter Box
• To prevent possible scratches or damage, assemble the product
on a soft surface such as a blanket, carpet or packaging.
PLEASE NOTE: Plants are not included. Living plants are NOT to be planted directly into the Cubit Planter
Box, they will require a pot and base to catch any water when plants are watered.
Recommended
2-person Step

Page 2
Assembly Instructions
knightgroup.co.nz
Item Description Qty Item Description Qty
O Side Panel 2 5/8” Cam Cover 14
O1 Side Panel 2
G Bottom Panel 1
Cubit Planter Box
Cam
c5
Pre-installed Parts
c2
14 x 5/8” Cam Cover
c2
Parts

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Cubit Planter Box
Step 2
Connect cam bolts and dowels on panel G and O to the holes on panel O1 and tighten in a clockwise direction 2.
Cover the tops of the cams with cam covers (c2).
Connect cam bolts and dowels on panel G to the holes on panel O and tighten in a clockwise direction.
Step 1

Page 4
Assembly Instructions
knightgroup.co.nz
Page 4
Assembly Instructions
Cubit Planter Box
Complete
Remove the double sided tape and stick the tackboard on the top of the Cubit Tambour.
Step 3