KoamTac KDC480 Series User manual

Quick Manual
What’s in the Box? Additional Accessories
KDC480 Series
Mini Guide
•KDC480 or KDC485
•Type-C USB Cable
•Hand Strap or tablet strap
•Quick Manual
•KOAMTACON Guide
•SmartSled Cases for Apple
and Android
•SmartSled Custom Cases
•OTG General Universal &
uniVERSE Case Adaptors
•1-Slot and 4-Slot Charging
Cradles
•1100mAh Hardpack Battery
•HF RFID Companion
•0.5W UHF Companion
•1.0W UHF Companion
•mPOS & MSRIC Companion
•Pistol Grip Companion
•2000mAh Extended Battery
Bluetooth Profiles Explained
Powering On/Off
Press both SCAN and DOWN buttons for 3 seconds.
The KDC will beep when turned ON or OFF. The KDC
will sound a long beep when it is ready to use.
Basic Operation
1. Aim the KDC directly at the barcode and press either
of the SCAN buttons located on each side of the
device ensuring the beam covers the barcode
horizontally.
2. A successful scan will sound 1 beep and show a green
LED. An unsuccessful scan will sound 2 beeps and
show a red LED.
Available Models
OR
1. Navigate to the Bluetooth setting on the host PC, Mac,
Smartphone, or Tablet.
2. Ensure that Bluetooth is enabled on the host device and
searching for devices.
3. Using the KDC, scan the pairing barcode that corresponds to
your desired Bluetooth profile. If you are unsure which
Bluetooth profile is right for you, please refer to the previous
panel.
3a. If KDC does not have a barcode scanner, hold any SCAN
button on the KDC for 5 seconds until you hear a beep to
begin pairing (Select Bluetooth Profiles from KTSync
Windows using USB cable).
4. Check the list of available Bluetooth devices on your host
device.
5. From the list, select KDC listed by serial number in brackets
that matches the serial number found on the back side of
the KDC.
6. In HID mode, the KDC is now ready to use.
7. To complete connection in SPP mode, launch KTSync or your
application and select the KDC.
* The KDC will beep when successfully connected.
Pairing & Connecting Pairing Barcodes
* For all KDC480 and KDC485 models.
•KDC480L 1D Laser SmartSled Scanner
•KDC480D 1D CCD SmartSled Scanner
•KDC480C 2D Imager SmartSled Scanner
•KDC480 SmartSled (no barcode scanner)
•KKDC485S 1D Laser SmartSled Scanner
•KDC485H 2D Imager SmartSled Scanner
3s
3s
KDC480 Models
3s
3s
KDC485 Models
* SmartSled case sold separately.
HID inputs data directly into an application. SPP requires
the KOAMTAC KTSync
®
app or integration of the
KOAMTAC SDK to input data into an application.
Allows one-way Bluetooth communication
with a Windows PC. The KDC only
transmits data to the Windows PC.
Allows two-way Bluetooth communication.
The KDC transmits data to the host device
and the host can transmit data back to the
KDC.
Allows one-way Bluetooth communication
with an Android or iOS host device. The
KDC only transmits data to the host
device.
HID
HID Windows
SPP

Using Keyboard Wedge KTSync & SDK KOAMTACON
Specs Specs
KDC480 Diagram
Helpful Barcodes
Functionality
Memory Flash ROM: 256KB Program, 8MB User Data
Memory RAM: 64KB
Can store more than 400,000 Barcodes (EAN-13)
Wedging & Synchronization
Keyboard wedge function
Add-on prefixes and suffixes
Barcode option selection
Scan Range (20mil Code39)
L - Laser: 1.97” to 18.11” (50 mm to 460 mm)
D - CCD: 1.97” to 18.11” (50 mm to 460 mm)
C - Imager: 2.36" to 18.35" (60 mm to 466 mm)
S - Laser: 1.40" to 52.00“ (35 mm to 1320 mm)
H - Imager: 1.73" to 31.5" (44 mm to 800 mm)
Supporting OS
Android / iOS / Mac OS X / Windows
Interfaces
Bluetooth
®
Low Energy 5.0: HID (Android/iOS/Windows),
SPP (Optional Secure Mode)
USB Type-C: USB HID, USB Serial (Android with an
integrated case)
Lightning: Serial (iOS with an integrated case)
Electrical Characteristics
Battery: Lithium-ion (3.7V DC, 1100 mAh)
Charging: via USB Type-C connector, Charging Cradle
User Environment
Ingress Protection Rating: IP65
Drop Spec: 5' (1.5 m)
Operating: -4˚F to 122˚F (-20˚C to 50˚C)
Storage: -4˚F to 140˚F (-20˚C to 60˚C)
Humidity: 5% to 95% (non-condensing)
Enable Beep Sound
Disable Beep Sound
MG_KDC480_20220506
Keyboard wedge allows you to use your KDC as a
keyboard. The HID profile works as keyboard wedge by
default. When using SPP, KTSync provides a keyboard
wedge function when KTSync keyboard is enabled.
Please refer to the KDC Reference Manual for detailed
instructions to enable KTSync keyboard.
1. Ensure that the KDC is connected to the host using
the HID profile or the KDC is connected via KTSync
keyboard using SPP profile.
2. Open any application on the host device that
contains a text field you want to populate.
3. Tap the text field in the application.
4. Scan any barcode with the KDC.
5. The barcode data will then populate in the text field.
KTSync
®
is a program which communicates with the
KDC via Bluetooth. It enables users to read and store
data. KTSync is compatible with iOS, Android,
Windows, and Mac. It also supports wedging and
downloading data from the KDC.
For more information about KTSync, please visit:
www.koamtac.com/support/downloads/applications
The Software Development Kit (SDK) is the perfect
solution for creating a custom application to collect
data utilizing your KDC. The KOAMTAC SDK covers all
major development platforms: Android, iOS, Windows,
Xamarin, and Cordova. Developers may take advantage
of the complimentary SDK and enjoy the full benefits of
the KOAMTAC Developer Program.
For more information regarding the KOAMTAC
Developer Program or to request the latest SDKs, visit:
www.koamtac.com/support/downloads/sdk
or e-mail [email protected].
KDC485 models are identical except for their angled
scan engines.
The first application suite of its kind, KOAMTACON is a
data collection cloud suite designed specifically to be
used with KDC Bluetooth barcode scanners, RFID
readers, and Magnetic Stripe Readers (MSR) to collect
data in any situation.
With apps ranging from ticketing to warehouse
management, KOAMTAC has you covered. It’s never
been so easy to collect data via barcodes, RFID, or
Magnetic Stripe.
KOAMTACON is:
•Simple to maintain
•Easy to use
•Cloud-based
•Compatible with any device
For more information please visit:
www.koamtacon.com
KDC480 Companions
2000mAh
Extended Battery
HF and 0.5W
UHF Readers
MSR/IC
Reader
mPOS
Pistol Grip
1.0W
UHF Reader