KoamTac KDC200 KDC250 User manual

©2020 KOAMTAC, Inc.
QG_KDC200_20201014
KDC2
00
Quick Guide
116 Village Blvd, Suite 305, Princeton, NJ 08540 USA
T: + 1-609-256-4700 F: [phone]
[e-mail] www.koamtac.com

KDC200
Quick Guide
See Reference Manual for more detailed information.
Visit store.koamtac.com to purchase additional products and accessories.
QG_KDC200_20201014 p1
Contents
1. Product Introduction.........................................................................................................................................2
1.1 KDC200 Diagram .......................................................................................................................................2
1.2 How to Reset .............................................................................................................................................2
2. Bluetooth Pairing ..............................................................................................................................................3
3. Usage ................................................................................................................................................................4
3.1 Using Keyboard Wedge (HID Keyboard) ..................................................................................................4
3.2 Using KTSync – Android/iOS ....................................................................................................................4
3.3 Using KTSync Keyboard – Android ...........................................................................................................5
3.4 Using KTSync Keyboard – iOS ..................................................................................................................6
3.5 Using other Developed Applications with SDK – Android/iOS................................................................7
4. Product Specifications ......................................................................................................................................8

KDC200
Quick Guide
See Reference Manual for more detailed information.
Visit store.koamtac.com to purchase additional products and accessories.
QG_KDC200_20201014 p2
Product Introduction
The KDC200 Bluetooth barcode scanner is an ultra-lightweight and compact 1D laser data collector.
1.1 KDC200 Diagram
1.2 How to Reset
Refer to the figure in section 1.1 to locate the SCAN and DOWN buttons.
a) Press SCAN and DOWN buttons simultaneously for 3 seconds and release both buttons.
b) The KDC will restart.

KDC200
Quick Guide
See Reference Manual for more detailed information.
Visit store.koamtac.com to purchase additional products and accessories.
QG_KDC200_20201014 p3
Bluetooth Pairing
Connecting your KDC using Bluetooth is made easy with the below pairing barcodes. If you are unsure which
profile is right for you, please visit www.koamtac.com for more information.
1. Navigate to the Bluetooth setting on the host PC, Mac, Smartphone, or Tablet.
2. Ensure that Bluetooth is enabled on the host device and searching for devices.
3. Using the KDC, scan the pairing barcode that corresponds to your desired Bluetooth
profile. If you are unsure which Bluetooth profile is right for you, please refer to the
previous panel.
4. Check the list of available Bluetooth devices on your host device.
5. From the list, select KDC200 listed by serial number in brackets that matches the serial
number found on the back side of the KDC200.
6. In HID mode, KDC200 is now ready to use.
7. To complete connection in SPP/MFi mode, launch KTSync or your application and
select KDC200.
* The KDC200 will beep when successfully connected.
Android, Mac, Windows: HID Normal
SPP & MFi
iOS: HID iOS

KDC200
Quick Guide
See Reference Manual for more detailed information.
Visit store.koamtac.com to purchase additional products and accessories.
QG_KDC200_20201014 p4
Usage
3.1 Using Keyboard Wedge (HID Keyboard)
This option is only available using Bluetooth connection with HID profile.
Once the KDC is paired with the host, open any application with a text field and tap on the text field. Scan any
barcode and it will populate in the text field.
3.2 Using KTSync – Android/iOS
You can use KTSync to utilize your KDC alone or with a native application. This is only available using
Bluetooth connection with SPP or MFi.
a) Download and install KTSync from the Google Play Store or the Apple App Store.
b) Open KTSync and tap on the “Connect” option on the bottom left to view a list of available devices.
(Fig. 1)
c) From the device list, select your KDC – ensuring that the serial number displayed in brackets matches
the serial number on the back of your KDC. (Fig. 2)
d) Upon successful connection, KTSync will display “Connected” next to the name of your KDC at the top
of the application. (Fig. 3)
e) To test your connection, scan any barcode. If the connection is successful, the barcode data will display
on the screen. (Fig. 3)
< Fig. 1 > < Fig. 2 > < Fig. 3 >