Kodak Ngenuity 9000 Series User manual

KODAK 9000 3D Extraoral Imaging System
Installation Guide

Notice
Congratulations on your purchase of the KODAK 9000 3D Extraoral Imaging System. Thank you for your confidence
in our products and we will do all in our power to ensure your complete satisfaction.
The Installation Guide for the KODAK 9000 3D Extraoral Imaging System includes information both on the
Panoramic features as well as the 3D features. If you have purchase only the KODAK 9000 Panoramic system,
information relevant to 3D does not apply to your radiological system. We recommend that you thoroughly familiarize
yourself with this Guide in order to make the most effective use of your system.
The information contained in this Guide may be subject to modification without notice, justification or notification to
the persons concerned.
No part of this Guide may be reproduced without the express permission of Carestream Health, Inc.
This document is originally written in English.
Manual Name: KODAK 9000 3D Extraoral Imaging System Installation Guide
Part Number: SM711
Revision Number: Edition 01
Print Date: 12/2007
The brand names and logos reproduced in this Guide are copyright.
KODAK is a trademark of KODAK used under License.
KODAK 9000 3D Extraoral Imaging System, complies with Directive 93/42/CEE relating to medical equipment.
0086

KODAK 9000 3D Extraoral Imaging System_Installation Guide (SM711)_Ed 01 iii
Contents
1—About This Guide
Conventions in this Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1–1
Note to the User. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1–2
Warning and Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1–2
Marking and Labeling Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1–4
Responsibility and Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1–5
2—KODAK 9000 3D DIGITAL IMAGING UNIT OVERVIEW
Functional Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2–1
Control Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2–4
X-Ray Remote Control Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2–5
3—KODAK 9000 3D PACKAGING
Standard Packaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3–1
Head Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3–2
Box (A) Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3–2
Box (B) Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3–3
Column Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3–5
4—SITE PREPARATION BEFORE INSTALLATION
Standard Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–1
Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–1
Unit Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–2
Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–3
X-Ray Room Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–7
PC System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–9
5—INSTALLING THE KODAK DENTAL IMAGING SOFTWARE
6—INSTALLING THE UNIT
Tool Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6–1
Technical Staff Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6–1
Opening the Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6–2
Installing the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6–4
Installing the Column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6–4
Installing the Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6–6
Installing the Fixed Arm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6–8
Connecting the General Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6–9
Fitting the Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6–11
7—Maintenance
Annual Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7–1

iv
Contents
8—TECHNICAL SPECIFICATIONS
Compliance with International Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8–1
Unit Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8–2
Unit Electronic Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8–4
X-Ray Generator Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8–5

KODAK 9000 3D Extraoral Imaging System_Installation Guide (SM711)_Ed 01 1–1
Chapter 1
About This Guide
Conventions in this Guide
The following special messages emphasize information or indicate potential risk to persons or
equipment:
WARNING
Warns you to avoid injury to yourself or others by following the
safety instructions precisely.
CAUTION
Alerts you to a condition that might cause serious damage.
IMPORTANT
Alerts you to a condition that might cause problems.
NOTE
Emphasizes important information.
TIP
Provides extra information and hints.

Note to the User
1–2 About This Guide
Note to the User
WARNING
X-rays can be harmful and dangerous if not used properly. The
instructions and warnings contained in this guide must be therefore
carefully followed.
As a manufacturer of radiology units that conform to stringent radiological protection
standards in force throughout the world, we guarantee a maximum degree of protection against
radiation hazards. Nonetheless, you are handling a radiology unit specially designed to emit
x-ray doses in order to carry out a medical diagnosis.
The room in which your radiology Unit is to be installed must comply with all official
regulations applicable to protection against radiation. You must install your radiology unit in a
room protected against x-ray emission. This room must reduce the frequency interferences of
the 30MHz to 1GHz band to at least 12db.
Your local representative will assist you in the initial use of your radiology Unit and will
supply any relevant information you may require.
To use and operate your panoramic unit and your digital imaging software you must follow the
instructions contained in this guide.
Warning and Safety Instructions
When operating the Kodak 9000 unit, observe the following warning and safety instructions:
DANGER OF ELECTRIC SHOCK
This is an electrical Unit. DO NOT expose it to water spray. Such action
may cause an electric shock or a malfunction of the Unit.
LASER WARNING
For maximum safety, advise the patient not to look at the beam.
Before turning on the beams, lower the Frankfurt plane beam to
the lowest level. While making adjustments, ensure that the beam
is not directed into the patient's eyes.
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Maximum laser output:1mW,650nm
IEC60825-1:1993+A1:1997+A2:2001

Warning and Safety Instructions
KODAK 9000 3D Extraoral Imaging System_Installation Guide (SM711)_Ed 01 1–3
WARNINGS:
•You are responsible for the operation and maintenance of this unit. Only legally
qualified persons can operate this unit. DO NOT open the cover of the unit.When
necessary, have a trained authorized service technician carry out inspection and
maintenance operations.
•Install this Unit in an x-ray room that complies with current installation
standards. From this location, you must be able to maintain visual or audio
communication with the patient and be able to access the Acquisition interface
module during exposure. This Unit must be permanently connected to the
ground with a fixed power supply cable.
•DO NOT place the PC and the peripheral equipment connected to it in the
immediate vicinity of the patient in the Unit. Leave at least 1.5 m distance
between the patient and the Unit. The PC and the peripheral equipment must
conform to the IEC60950 standard.
•See your computer installation guide for details of the data processing system,
PC and screen. Leave a sufficient amount of clear space around the CPU to
ensure that it is properly ventilated.
•To obtain maximum image quality and visual comfort, position the screen to
avoid direct light reflections from internal or external lighting.
•DO NOT operate the Unit if there is the threat of an earthquake. Following an
earthquake, ensure that the Unit is operating satisfactorily before using it again.
Failure to observe this precaution may expose patients to hazards.
•X-ray equipment is hazardous to patients and the operator if you do not observe
the exposure safety factors and operating instructions.
•DO NOT place objects within the field of operation of the Unit.
•The patient should wear a protective lead-lined shoulder apron, unless other
Radiation Protection Protocols apply locally.
•Disinfect any parts of the Unit that come into contact with the patient and the
operator after each patient has been exposed to x-rays.
•While adjusting the height of the Unit, ensure that the patient is kept clear of the
mechanism.
•When the Unit is not in use, ensure that the ON/OFF switch is set to OFF (O).
•If the Unit develops a fault, switch it to off (O), display an “Unserviceable” notice
and contact a service technician.
•To dispose of the Unit or its components, contact a service technician.
•Ask the patient to refrain from moving during the entire period of exposure.
•Ask the patient to remain still until the Unit arm has stopped moving and the
RESET movement has completed.
•DO NOT use this Unit in conjunction with oxygen-rich environments. This Unit
is not intended for use with flammable anesthetics or flammable agents.

Marking and Labeling Symbols
1–4 About This Guide
Marking and Labeling Symbols
Type B device symbol complying with the IEC 60601-1
standard
In the EEC, this symbol indicates: DO NOT discard this
product in a trash receptacle; use an appropriate recovery
and recycling facility.
Contact your local sales representative for additional
information on the collection and recovery programs
available for this product
WARNING and IONIZING RADIATION symbols warn
you about radiation dangers.
LASER WARNING
Laser radiation. DO NOT stare into the beam.
Class 2 laser product.
Maximum output power: 1mW, 650 nm (IEC 60825-1
standard)
This Unit emits laser radiation.
NConnecting point to the neutral conductor
LConnecting point to the live conductor
Protection ground (G)
Functional ground
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Maximum laser output:1mW,650nm
IEC60825-1:1993+A1:1997+A2:2001

Responsibility and Warranty
KODAK 9000 3D Extraoral Imaging System_Installation Guide (SM711)_Ed 01 1–5
Responsibility and Warranty
Only damage affecting products themselves will be considered. The client can in no case claim
damage compensation if it does not purely concern the product itself and provided that this
exclusion of responsibility does not infringe any legal measures.
This warranty does not cover damages and faults due to accident, incorrect usage, improper
use, negligence, or wear and tear due to normal use.
Carestream Health, Inc. can not be held liable for the consequences resulting from the
non-application of the instructions contained in the installation and user manuals, namely
bodily harm, profit loss, operational interruptions, data loss, loss of a financial nature, or any
direct or indirect damage.
Carestream Health, Inc. reserves the right to examine any presumed defect.
Clients are not entitled to delay the payment of their bills or any financial deductions by way
of products reputed to be faulty.
Due to the continuous development of its products, Carestream Health, Inc. reserves the right
to amend at any time the manual and products mentioned therein, without justification or
notification to the people involved.
Our products are guaranteed in their original packaging. Carestream Health, Inc. cannot be
held liable for damages resulting from transportation.
Consumable spares, software and accessories are excluded from the warranty.

Responsibility and Warranty
1–6 About This Guide

KODAK 9000 3D Extraoral Imaging System_Installation Guide (SM711)_Ed 01 2–1
Chapter 2
KODAK 9000 3D DIGITAL IMAGING UNIT
OVERVIEW
The KODAK 9000 3D digital imaging unit is compliant with the requirements of the EEC and
international medical standards.
The KODAK 9000 3D Unit has been designed to carry out the following radiological
examinations:
•Panoramic
•Maxillary Sinus
•Temporomandibular Joints (TMJ)
•3D images
The KODAK 9000 3D Unit is composed of the following functional components:
•Control Panel
•Remote Control
Functional Overview
The following figures illustrate the components of the KODAK 9000 3D Unit.
Figure 2-1 illustrates the up and down movement of the Unit mobile component and the 180°
rotation of the rotative arm.
Figure 2–1 KODAK 9000 3D Unit

Functional Overview
2–2 KODAK 9000 3D D IGITAL IMAGING UNIT OVERVIEW
Figure 2–2 KODAK 9000 3D Unit functional components
1Unit fixed arm 13 LAN RJ45/2
2Control panel 14 Sensor
3Hand grips 15 Generator
4Temple supports 16 Unit rotative arm
5Chin rest base 17 Under the head front cover
5 a Panoramic chin rest 18 Under the head back cover
5 b 3D chin rest and forehead support 19 Head cover
6Unit mains connecting terminal 20 Column side cover
7Green warning lamp (x-ray emission indicator) 21 Column inside cover
8Column connecting terminals 22 ON/OFF button
9X-Ray remote control 23 Wall mounting brackets
10 Door safety switch 24 Wall mounting brackets cover
11 PC hosting the imaging and acquisition software 25 Column upper cover
12 Ethernet outlet RJ45/1
9
52
6
RJ45/1
RJ45/2
713
12
8
11
4
15
17
1
20
5a
21
22
24
23
25
19
14
18
16
5b
5
3
10

Functional Overview
KODAK 9000 3D Extraoral Imaging System_Installation Guide (SM711)_Ed 01 2–3
Figure 2–3 KODAK 9000 3D Unit Positioning Laser Beam components
13D central positioning laser beam
2Mid-sagittal positioning laser beam
3Horizontal positioning laser beam
43D Field of View (FoV) positioning
laser beam
21
2
1
4
3
A
A
B
B
1
2
4
3

Control Panel Overview
2–4 KODAK 9000 3D D IGITAL IMAGING UNIT OVERVIEW
Control Panel Overview
The Control Panel is an alphanumeric digital soft touch console. It allows the operator to
control certain Unit functions. It also displays the operating parameters and error messages.
Figure 2–4 Unit Control Panel
1 Height Adjustment button: Adjusts the height of the unit to the height of the
patient.
2 Head Adjustment button: Adjusts the patient head to the x-ray beams.
3 3D Adjustment button: Adjusts the Unit arm movements to correctly position
the patient for 3D acquisition.
4 Laser Beam button: Activates the beams to correctly position the patient.
5 3D Position Verification button: Verifies the correct 3D positioning.
6 Reset button: Resets the Unit arm to the initial position to enable the patient to
enter and exit the Unit.
7 3D Memorization button: Memorizes the 3D current positioning parameter
settings that override the default parameters.
8 Display Screen: Displays the current acquisition parameters and the error
messages.
9 Ready Indicator LED: Green indicates the Unit is ready for acquisition.
10 X-Ray Emission LED: Yellow indicates x-rays are being emitted.
11 System Status LED: Red indicates error alerts.
mem
kV mA S
76
123
5410911
8

X-Ray Remote Control Overview
KODAK 9000 3D Extraoral Imaging System_Installation Guide (SM711)_Ed 01 2–5
X-Ray Remote Control Overview
The x- ray remote control enables you to launch a radiological image acquisition via the
exposure button from outside the x-ray room. You must press and hold the exposure button
until the end of acquisition. Premature release of the exposure button interrupts the
acquisition.
Figure 2–5 X-Ray Remote Control
1 Exposure button: launches image acquisition.
1

X-Ray Remote Control Overview
2–6 KODAK 9000 3D D IGITAL IMAGING UNIT OVERVIEW

KODAK 9000 3D Extraoral Imaging System_Installation Guide (SM711)_Ed 01 3–1
Chapter 3
KODAK 9000 3D PACKAGING
Standard Packaging
When unpacking the boxes, ensure that you received the following components.
•Head assembly components (A & B)
•Column assembly component
Table 3–1 Head Assembly Components
Box Components Dimension (cm) Weight
(A) •Fixed arm
•Unit covers
800mm (D) x 1200mm (L) x 1540mm (H) 190 kg
(B) •Unit head
•X-ray remote control
•Positioning accessories
•Technical accessories
•Documentation
Table 3–2 Column Assembly Components
Box Components Dimension (cm) Weight
Column assembly
•Unit column
•Wall mounting bracket
•Wall bracket cover
•3 meter mains power cable
•Upper column cover
350mm (D) x 2300mm (L) x 460mm (H) 74 kg
A
B

Head Assembly
3–2 KODAK 9000 3D PACKAGING
Head Assembly
The head assembly is composed of 2 boxes (A & B) superposed.
Box (A) Components
Table 3-3 lists the box A components.
Table 3–3 Box (A) Components
Product Description Quantity
Unit fixed arm 1
Under the head front cover 1
Under the head back cover 1
Column side cover 1
Column inside cover 1

Head Assembly
KODAK 9000 3D Extraoral Imaging System_Installation Guide (SM711)_Ed 01 3–3
Box (B) Components
The following Tables list the box B components.
Table 3–4 Unit Head
Product Description Quantity
3D Head assembly and the head cover 1
Table 3–5 Different Components
Product Description Quantity
X-ray remote control 1
Mounting hook for the x-ray
remote control 1
A set of right and left temple supports 2
Table 3–6 3D Positioning Accessories and Replacement Parts
Accessory Description
3D bite block
3D chin rest
x2

Head Assembly
3–4 KODAK 9000 3D PACKAGING
Table 3–7 Panoramic Positioning Accessories and Replacement Parts
Accessory Description
•Panoramic chin rest
•TMJ x2 chin rest
•Sinus chin rest
TMJ x4 nose rest
Panoramic standard bite block
Bite block for edentulous patients
Single use sheaths for bite blocks (500 pcs
box)