Kogan KAMN27QFSA User manual

27" QHD IPS FREESYNC 75HZ
FRAMELESS MONITOR
(2560 x 1440)
KAMN27QFSA

• Read all instructions before using the monitor and retain for future reference.
• Unplug the monitor before cleaning it.
• Use a clean, slightly dampened cloth to wipe the main monitor body.
• To c l e a n t h e s c r e e n , t u r n i t o f f u n p l u g i t a n d w a i t f o r i t to c o o l c o m p l e t e l y, t h e n w i p e
it with a dry micro-fibre cloth.
• Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
• This monitor is designed with ventilation holes on the back of the casing. Do not
cover or block them.
• Do not insert any object or spray any liquid into the vents.
• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat.
• Place monitor in well ventilation room.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be
damaged and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cable.
• Do not open the back panel of the monitor, as it contains a high-voltage current
even when not plugged in.
• Before disposing of any packaging, place all items on a soft, clean and flat surface
to ensure all components are accounted for.
The terms HDMI and HDMI High-Definition Multimedia Interface
and the HDMI Logos are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States and other
countries.
SAFETY & WARNINGS

Monitor
Stand Arm
Stand base
Stand base screw
(M6 x 16mm)
VESA screws (x4))
Display port cable
Power cable
User guide
COMPONENTS

1
Power button
2
Directional buttons
3
Audio in
4
VGA connector
5
DP connector
6
HDMI connector
7
DVI connector
8
Power connector
OVERVIEW

1.
Carefully remove the monitor, stand
arm and stand base from the box.
2.
Attach the stand base to the stand
arm using the provided M6 screw.
3.
Insert the stand arm into the rear of
the monitor and push down until it is
firmly connected.
4.
Lift the monitor up straight and
remove the bottom foam. Stand the
monitor up on the installed base.
ASSEMBLY
WARNING: The panel of the monitor is fragile. Keep the foam
underneath the monitor screen while assembling the stand.
Open

1. Open the box, remove the monitor keeping the protection foam attached and gently
place it on a desktop or table.
2. Remove the foam covering the rear of the monitor. Press the release button to remove
the stand plate. If the monitor is already attached to the stand, remove the stand.
3. Assemble the mount as per the instructions provided with the mount.
VESA MOUNT
VESA MOUNT
VESA mounting pattern 100 x 100mm, screw size M4.
Note: VESA mount or mounting accessories are NOT included.
Stand base
Monitor
Stand connector
Stand plate
Button
Foam

Power cable
Connect the included power cable to the monitor power port, then connect the other end to
a power outlet.
Audio In
Connect the audio cable between the socket on the rear of the monitor (Audio In) and your
computer audio outlet.
CONNECTIVITY
Audio Cable (not included)

DisplayPort
Use the included DisplayPort cable to connect the monitor to your computer.
HDMI
Use a HDMI cable to connect the monitor to your computer.
DP cable (included)
HDMI cable (not included)

VGA
Use a VGA cable to connect the monitor to your computer.
DVI
Use a DVI cable to connect the monitor to your computer.
VGA cable (not included)
DVI cable (not included)

1. Connect the monitor to the input device via HDMI/DisplayPort/DVI or VGA.
2. Connect the power cable to the monitor, then connect the other end directly to a
power socket.
3. Use the power button to turn the monitor on.
Monitor Controls
Power Button:
• Press and hold the Power button for 6 seconds to turn on and off.
• When the display is turned on, press the Power button to bring up the main menu.
• Using directional buttons, navigate the main menu and make any required
adjustments.
• When finished press the Power again to save and return to the main menu.
Directional Buttons:
To use the directional buttons, press the Power button in the desired direction.
Shortcuts:
• Source menu: Press the Power button to the RIGHT twice to bring call up the
signal source selection menu, use the directional buttons to select the desired
source and press Power to confirm.
• Display mode menu: Press the Power button to the LEFT twice to bring call up the
display mode menu, use the directional buttons to select the desired display mode
and press Power to confirm.
• Gameplus timer menu: Press the Power button UP twice to bring call up the
Gameplus timer menu. Select the desired timing length and press Power to
confirm.
• Gameplus sight menu: Press the Power button DOWN twice to bring call up the
Gameplus sight menu. Select the desired sight and press Power to confirm.
OPERATION