Kogan KAMN15CSA User manual

15.8" FULL HD IPS LED
PORTABLE USB-C MONITOR
1920 X 1080
KAMN15CSA

2
Safety & Warnings 3
Overview 4
Using Cover Case 5
Connectivity 6
Operation 10
Cleaning & Care 13
Specifications 14
Troubleshooting 16
Notes 18

3
•Read these instructions. All safety and operating instructions must be read before this
product is operated.
•Keep these instructions – Retain this manual for future reference.
•All warnings on the device and in the operating instructions must be adhered to.
•Do not use this equipment near water. The appliance must not be used near water or
moisture (for example, in a wet basement or near a swimming pool).
•Clean only with a dry cloth. Do not use solvents or petroleum-based fluids.
•Only use attachments and accessories specified by the manufacturer.
•Unplug the device during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified personnel. Servicing is required when the product has
been damaged in any way, such as when liquid has been spilled, when objects have
fallen into the product, when it has been exposed to rain or moisture, when it does not
operate normally or has been dropped.
•Do not remove the safety covers. There are no user serviceable parts inside. Trying to
service the unit yourself is dangerous and may invalidate the product’s warranty.
•Only qualified personnel should service this device.
•Contact help.Kogan.com for assistance if required.
SAFETY & WARNINGS
WARNING: To reduce the risk of fire or electric shock, do not expose
this product to rain or moisture. The product must not be exposed to
dripping or splashing and objects filled with liquids, such as vases,
must not be placed on the product.

4
A 15.8" LED Portable Monitor F Secondary USB-C port (Only for a peripheral)
B Case cover G Headset hole
C Luma key H Type-C full function (Connect PD power
supply)
D Volume button I Type-C full function
E OSD/Power Button J Mini HDMI
OVERVIEW

5
The cover case has a built-in magnet that can be attached to the monitor. Attach the case
by following the below steps:
By using the cover case as a stand, the main unit can be used at an angle as shown below:
USING COVER CASE
Back side
(with one line)
Align the hole in the
protective shell with the
hole in the portable screen
and install screws
Fold the LED side of
the cover case over
the LED display
Fold the cover case
outward
Attached to rear
of monitor

6
Plugging in
If the device you’re connecting to has a USB-C port, connect one end of the USB-C to USB-
C cable to the device and the other end to the portable monitor.
Some devices may not provide enough power to the monitor. Check the USB-C port on your
device for the symbols shown in the table below.
If you have one of the green checked symbols, then your USB-C port should provide both
data and enough power to the monitor.
If the monitor won’t turn on, connect a USB-A to USB-C cable along with an HDMI cable.
CONNECTIVITY
Note:
MacBook ports should be compatible even if there are no symbols next to the port.

7
Computer (via USB-C)
The portable monitor can be connected to a compatible computer using the supplied USB-
C cable. This must be connected to the primary USB-C port on the monitor’s left side. The
computer will provide power and signal to the monitor and can be used for extended display
or duplicated display use.
Computer (via HDMI & USB-A)
If connecting to a computer without a USB-C port, you can utilise HDMI as long as you also
provide a power supply. There are two options for this. The first is to connect the supplied
HDMI-to-Mini HDMI cable between the computer and the portable monitor, while also
connecting to the computer via USB to provide power. Connect the USB-A from the
computer to the primary USB-C port on the monitor’s left side.
Note:
Depending on the power supplied by the USB port on the computer (display requires
5V/2A), additional power may need to be supplied to the monitor through the
secondary USB-C port on the right of the monitor.
Computer without
USB-C port
Computer with full-
function USB-C port
USB-C to USB-C
Display
USB-A to USB-C
HDMI to Mini HDMI
Display

8
Computer (via HDMI & power adapter)
The second option for HDMI connection is to connect the supplied HDMI-to-Mini HDMI
cable between the computer and the portable monitor, while also connecting the monitor
directly to an external power adapter (supplied) via USB. For this, you can use either the
primary USB-C port on the monitor’s left side or the secondary USB-C port on the monitor’s
right side.
Mobile phone (via USB-C)
If there is no external power supply connected to the secondary USB-C socket on the right
of the monitor, the mobile phone battery will supply power to the display. To reduce power
usage, the energy-saving mode will be activated and the display brightness will be reduced
to 30%. You can adjust the brightness and volume of the monitor according to the output
power of the mobile phone.
When connected to an external power supply through the secondary USB-C port, the
display will provide power to the mobile phone through the external power supply. The
brightness of the monitor will automatically be adjusted to 85% when connecting with
external power.
Note:
If using a power bank (not supplied) as an external power source, it must be larger than
16W. Power banks can be used as external power for every connection shown here, not
just mobile phones.
Computer without
USB-C port HDMI to Mini HDMI Display
USB-C to power adapter
Mobile
Phone
USB C to USB C Display
External power
supply of 5V/2A
or more

9
Other devices (via HDMI & USB or power adapter)
If connecting to a device without a USB-C port, you can utilise HDMI as long as you also
provide a power supply. There are two options for this. The first is to connect the supplied
HDMI-to-Mini HDMI cable between the device and the portable monitor, while also
connecting to the device via USB to provide power. Connect the USB-A from the device to
the primary USB-C port on the monitor’s left side.
The second option for HDMI connection is to connect the supplied HDMI-to-Mini HDMI
cable between the device and the portable monitor, while also connecting the monitor
directly to an external power adapter (supplied) via USB. For this, you can use either the
primary USB-C port on the monitor’s left side or the secondary USB-C port on the monitor’s
right side.
Note:
When connecting a device using HDMI, to ensure the smooth transmission of the
signal be sure to connect the power cable first, then connect the HDMI.
HDMI to Mini HDMI
USB-C to USB-A
Display
External power
supply if USB
power insufficient

10
OSD Control (Non-Touchscreen)
•Power button: Power (long press) / signal source / Return / long press and 90 degrees
screen rotation
•Dial button
•Dial button up / Down
•Dial button (Down Button): Down / Volume
Operation Method
Step 1: Press Down the dial button to enter the OSD menu.
Step 2: Rotate the dial button up and down to choose features.
Step 3: Press the power button to exit.
Brightness / Contrast Menus
•Brightness: Adjust the brightness of the screen. Adjustment range (0-100).
•Contrast: Adjust the contrast level of the image. Adjustment range (0-100).
•ECO Mode: Adjust display mode. Standard / Games / Movies / Photos.
•Dynamic Contrast: Toggle dynamic contrast function On/Off.
•Sharpness: Adjust sharpness. Adjustment range 0-4.
OPERATION