Kohler AQUA TURBO 360 User manual

INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time without
notice.
Please leave these instructions for the consumer.They contain important information.
1232016-IN2-B 1
1232016-IN2-B 4
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. Inspect the supply tubing for damage. Replace as necessary.
3. Observe local plumbing codes.
4. Check for leaks before covering the pipes, repairs as needed.
5. Do not remove the protective cover from the valve body until instructed to.
Kohler India Corporation Pvt. Ltd.
6th Floor. Office Block, Ambiance Island, NH-8
IN
Gurgaon - 122002, Haryana, India
Customer Care No : 1800 103 2244
(Toll Free) & [phone] / 86
Customer Care Email : [email protected]
www.kohler.co.in
AQUA TURBO 360
99924IN
6. The pressure difference between hot and cold water must be kept as low as possible (max. 1.5bar).
7. It is recommended to assemble filters for water inlets.
ROUGH-IN DIMENSION (In mm)
77.5
170.5
Min
Max
40.7-59.2
Can Vary From
FINISH WALL
CLEANING INSTRUCTION
PBar
T°C
0.5 < 3 < 6
< 65
AQUA TURBO 360 MANUAL HIGH FLOW VALVE

SPIRIT LEVELLER
INSTALLATION-VALVE ASSEMBLY
SERVICE PARTS
INSTALLATION-VALVE ASSEMBLY
23
INSTALLATION - VALVE ASSEMBLY W.R.T FLOOR (IN MM)
Min
Max
40.7-59.2
Can Vary From
FINISH WALL
2
34
99924IN-**
1145688
871241
831306 1229154-
1229992
1238399
1209313-**
DISTANCE FROM FLOOR
FLOOR
Min
Max
1220
77.5
170.5
1
1232016-IN2-B 1232016-IN2-B
FINISHED WALL
FINISHED WALL
60 65 C
o
**