Kohler 24811A-0 Installation guide

Record your model number
below for future reference:
IMPORTANT NOTICE TO INSTALLERS!:
Please leave these instructions for the
consumer. Please retain for future reference.
NOTE: Some installation parts might not
be provided.
NOTE:The productpictured in the
installation steps may differ from the
model being installed.
6
Close the toilet seat.
5
Position the mounting plate and tighten
the screws.
1Insert the toggles into the seat fixings holes. Push the collar down while pulling
straps up and snap off straps.
2Insert the gaskets into the hinge plate.
Important Information
INSTALLATION & CARE INSTRUCTIONS
TOILET SEATS
24811A-0
28773A-0
1355761-GL2-A Page 1 of 2 Kohler.Co
3Insert the mounting plate into the
mounting holes..
4Position the mounting plate and tighten
the screws.

7
Your Quick Release seat is now
installed.
1355761-GL2-A Page 2 of 2 Kohler.Co
Clean the outside surface of your toilet seat with mild soap, such as liquid dish soap and warm water. Wipe the entire surface
completely dry with a clean soft cloth.
Do not use any abrasive cleaners, as they will scratch and dull the surface.
Avoid any detergents, disinfectants, or cleaning products in aerosol cans.
Avoid contact with abrasive chemicals and cosmetics,such as fingernail polish and aftershave,as they may damage the finish
of yourtoilet seat.
Care and Cleaning
For warranty information, please visit our website
Australia New Zealand
www.kohler.com.au www.kohler.co.nz
CALL US FOR HELP
NEW ZEALAND AUSTRALIA
KOHLER NZ LTD KOHLER CO.
Free Ph: 0800 564 537 (0800 KOHLER) Free Ph: 1 300 362 284
Free Fax: [phone] Free Fax: [phone]
www.kohler.co.nz www.kohler.com.au