Kohler C3-430 K-27142-CR User manual

C³®-430
Elongated bidet toilet seat with remote control
K-27142-CR
Features
•Hybrid heater provides continuously heated water for
consistent comfort.
•Self-cleaning function uses UV light to automatically clean the
wand surfaces.
•Sleek, handheld remote control with two programmable user
presets.
•LED lighting illuminates the bowl to serve as a nightlight.
•Heated seat with adjustable temperature settings.
•Front and rear wash modes provide warm water for
cleansing.
•Adjustable water temperature and water pressure.
•Quiet-Close™elongated seat closes quietly.
•Quick-Release™functionality allows seat to be removed
easily from toilet for convenient cleaning.
Material
•Plastic construction.
Installation
•Requires connection to toilet water supply line. All hoses and
connections are included.
Recommended Products/Accessories
K-3814 Two-piece elongated toilet with skirted trapway, 1.28
gpf
K-3814-RA Two-piece elongated 1.28 gpf chair height toilet
K-5172 One-piece compact elongated toilet with concealed
trapway, 1.28 gpf
K-5172-RA One-piece compact elongated 1.28 gpf toilet
K-3551 Two-piece elongated toilet, 1.28 gpf
K-3619 One-piece elongated toilet with concealed trapway,
1.28 gpf
K-3619-RA One-piece elongated 1.28 gpf chair height toilet
Included Components
Additional Components:
Inlet water supply hose
Seat mounting bracket
T-fitting
Codes/Standards
ASME A112.4.2/CSA B45.16
UL 1431
CSA C22.2 No. 64
CSA C22.2 No. 68
KOHLER®Intelligent Toilet and C3®
Cleansing Seat Three-Year Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Color Code Description
0 White
96 Biscuit
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-4-2022 22:58 - US/CA

C³®-430
Elongated bidet toilet seat with remote control
K-27142-CR
2-1/16"
(52 mm)
Remote Control
1-1/16"
(27 mm)
8-1/4"
(210 mm)
18-5/8"
(473 mm)
Min
19-3/8"
(492 mm)
Max
1-1/4"
(32 mm)
Min
16-15/16" (430 mm)
8-1/4"
(210 mm)
11-7/16"
(291 mm)
4-3/4"
(121 mm)
20-5/8"
(524 mm)
5-1/2"
(140 mm)
13-1/4"
(337 mm)
Min
15-9/16" (395 mm)
16-3/16"
(411 mm)
Electrical Service Detail
32" (813 mm) R.
6" (152 mm) Min
2"
(51 mm)
1-7/16"
(37 mm)
Required Electrical Service
One dedicated circuit required, protected with Class A Ground-
Fault Circuit-Interrupter (GFCI). Outside North America, this
device may be known as a Residual Current Device (RCD).
Bidet toilet seat: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Seat shape type: Elongated
Seat front type: Closed-front
Seat-mounting
holes:
5-1/2" (140 mm)
Electrical component
rating:
Bidet toilet seat: 120 V, 15 A, 60 Hz,
1800 W
Power cord length: 43" (1092 mm)
Notes
Install this product according to the installation
instructions.
Connect the seat to a cold water supply of
drinking quality water at a pressure of 20 psi -
80 psi (139 kPa - 551 kPa).
Do not install this seat in a location where: (1)
water might be splashed on the product or
(2) excessive moisture, high humidity levels,
or condensation is present. This will avoid
damage to the electronic components.
CAUTION: Risk of property damage. A single
extension cord may be used provided the cord
“Type” begins with “SJ”, 12 gauge, grounded
(12/3), no longer than 25 feet, and plugged into
a GFCI outlet. Promptly replace any extension
cord that exhibits any sign of damage.
To avoid possible product malfunction, do not
plug in the seat until instructed to do so.
Locate the recepticle at least 6" (152 mm)
above the floor, and within a 32" (813 mm)
radius measured 2" (51 mm) from the bowl
ledge.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-4-2022 22:58 - US/CA