
Kohler Co. 9 1226975-X5-B
Keep pressing the key until a short pip is heard, and release the key only after the night lamp ickers for three
times. Then change the seing of B/C/E/F/O by the following requirements.
B - Open/close the cover…Sensing distance seing
¨ Long press the key to set up the sensing distance for auto cover-turning:
1. Quick ashing of night light for one time means short-distance (short pip)
2. Quick ashing of night light for twice means mid-distance (short pip).
3. Quick ashing of night light for three times means long-distance (short pip).
4. If the nigh light ickers slowly, turn o the auto cover-turning function (long pip).
C - Seat On/O…Deodorization function seing
¨ Long press this key to turn on/o the deodorization function.
1. Quick ashing of night light once to activate the deodorization function (short pip).
2. Slow ashing of night light once to deactivate the deodorization function (long pip).
E - Flush-full…Automatic ushing seing
¨ Long press this key to turn o the function of automatic ushing. Long press it again to restore automatic
ushing.
1. Quick ashing of night light once to activate automatic ushing function (short pip).
2. Slow ashing of night light once to deactivate automatic ushing function (long pip).
F - Seat temp…Energy saving seing
¨ Long press the key of Seat Temp to activate the function of energy saving. Long press it again to deactivate this
function.
1. Quick ashing of night light once to activate energy saving function (short pip).
2. Slow ashing of night light once to deactivate energy saving function (long pip).
M -Euser movement…Euser cleaning seings
¨ Under non-seating status, long press this key to activate the function of manual cleaning. The nozzle can be
cleaned manually. Long press it again or press Stop key to deactivate this function.
When the seing of B/C/E/F/O is not modied for a certain period, repeat the process that is to keep pressing the
key until a short pip is heard and release the key only after the night lamp ickers for three times before the
next change of seing.
O - UV sterilization (UV light)…Seing of UV automatic sterilization
¨ Long press to set up the on/o status of automatic UV sterilization.
1. Quick ashing of night light once to activate the function of automatic UV sterilization (short pip).
2. Slow ashing of night light once to deactivate the function of automatic UV sterilization (long pip).
Important Safety Instructions (Cont.)
Usage and Replacement of Battery for Remote Controller
Others
¨ Charging block of remote controller uses 4 #5 alkaline baeries.
¨ When baery is low, the charging block will icker in red lamp, hinting
the user that baeries are to be replaced.
Caution:
1. The positive and negative polarities of baery must be consistent with
the mark of remote controller.
2. New and old baeries shall not be mixed.
3. Please use alkaline baery.
□ Do not put the remote control at a place where it may be sprayed by liquid, or immersed in liquid.
□ Do not place it near hand dryer, hair dryer and small size home appliances, to avoid disturbance of normal
usage of the remote control.
□ Do not apply external force to the key zone of remote controller frequently or ercely.
□ After usage of remote control, put it back into the holder mounted on wall.
□ Prevent dropping the remote control during usage.
□ Anti-theft function: remote controller can be locked and xed to the base via screws. Refer to the installation
instructions for detailed methods.
Red Lamp Flicker